by Mr. Desmond Mertz Published 3 months ago Updated 1 week ago Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. The front LED lights will change color, indicating the temperature setting has been changed.
Full Answer
How to turn off evod vape pen?
- Mouthpiece – This is where your mouth goes. ...
- Liquid Tank – Your eLiquid goes in here.
- Coil Unit – This part is normally hidden inside the Liquid Tank, it contains the heating coil that will be vaporizing the eLiquid.
- Battery Connection – This ring will hold the coil and connect to the battery.
How to properly clean your vape pen?
How to Properly Clean Your Dry Herb Vape Pen
- 1.) For hygiene. ...
- 2.) To allow your vape pen to work properly. ...
- 3.) To make your vape pen last longer. ...
- 4.) They make your vape pen more pleasurable to use. ...
- 1.) Read your vape pen’s user manual. ...
- 2.) Identify the extent of the cleaning needed. ...
- 3.) Disassemble the vape pen, if needed. ...
- 4.) Clean the mouthpiece with running water. ...
How to use your vape pen?
You probably have a lot of questions like:
- What is a vape pen?
- What are the parts of a vape pen?
- How do I use a vape pen?
- How do I get the most out of my vape pen?
- What are some good vape pen accessories?
- More vape pen FAQ
- Learn more about vape pens
- What is the best vape pen for beginners?
- Where can I find great online sales on vape pens?
How often do you charge the vape pen?
What Types of Vape Pens Are There?
- Pre-filled, Single-use Disposable Pens. Disposable pens are the easiest to operate and can be discarded after one use. ...
- Rechargeable pen with replaceable cartridges or pods. ...
- Rechargeable pen with refillable tanks. ...
- Box-Mod Vaporizers with refillable tanks. ...
- Draw Vapes. ...
- Push-Button Vapes. ...
How do I adjust the temperature on my vape pen?
How do I change the temperature of my G Pen Pro Vaporizer?Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. ... Low (Blue) - 375° F / 190° C.Medium (Green) - 400° F / 204° C.High (Red) - 428° F / 220° C.
How do I change the temperature on my vape battery?
0:503:22How to adjust the voltage on your 510 vape battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe other method is gonna be with the variable. Click buttons. So this one may not look like itMoreThe other method is gonna be with the variable. Click buttons. So this one may not look like it adjusts. But once you turn it on it'll flash and then you can do three clicks to change settings.
How do I change the voltage on my ego t?
- In new battery voltage output mode, lock the battery by 5 clicks first (orange LED blinks 3 times). - By pressing the button for 5 seconds (not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
How do I use my ego T vape pen?
How to Use A Vape PenCharge Your Battery. To use an ego vape pen, you'll first need to charge the battery. ... Fill the Clearomizer. Once your battery is charged, you will want to fill the clearomizer with your e liquid. ... Get Vaping! The final step in our ego e cig instructions is simply to enjoy your new vape kit!
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do I change the voltage on my vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
Why is my ego not producing smoke?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
Why does my ego blink 3 times?
This is a standard safety feature in that batteries are designed to cut out in order to prevent overheating. Certain batteries will flash 3 times to indicate a short circuit.
How long does ego-t battery last?
Product description. An eGo-T battery for those who prefer a longer time between recharges and dont mind the larger size of the device. Its bigger, heavier and will only go in the large size eGo case when fitted with an atomiser but it can last for up to 2 days for the average vaper.
What does it mean when my ego-T blinks 10 times?
If you hold the button down to puff for 10 seconds at a time, the light will start blinking. This is a warning indicator telling you that you are shortening the life of your atomizer coil by using it too hard.
What does it mean when my ego-T blinks?
The battery of the eGo-T can be turned on and off by rapidly pressing its activation button 5 times. When the battery turns on or off, the blue activation light will blink.
How do you know when your ego-T is fully charged?
0:281:09Great Vapes - Charging your eGo-C e-cigarette battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipTop is a charging status light a red light indicates that the battery is charging a green lightMoreTop is a charging status light a red light indicates that the battery is charging a green light indicates that the battery is fully charged.
What is a vape pen?
Vape pens are a great alternative to burning CBD or marijuana flower due to their convenience, cleanliness, portability and odorless vapor. If you just need a quick hit, vape pens allow you to get instant relief with a quick press of a button—all without having to grind and pack a piece.
How to run wax in preheat mode?
Preheat mode runs at a lower voltage than when actually pressing the button down , so only run it if your wax is super thick and clogged, or for a hands-free experience. Double-click the button to run it and take a hit!
How to get wax to work?
Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors. If you’re really having trouble getting a hit even at 4.0V, turn it up to 4.3V or run one cycle of preheat mode by double-clicking the button. On the other hand, if your dab tastes burnt, dial it back a bit.
Can a USB charger overcharge a pen?
Other USB chargers can easily overcharge your battery, weakening the cells inside over time. This is because other chargers continue to charge the battery, even when the charge is full. If you charge your pen overnight like most, you can easily degrade your battery in just a few months. The Smart Charger automatically stops supplying energy to the battery as soon as it’s fully charged.
Can you crank the temperature up on a slim twist pen?
Wax users—don’t be afraid to crank the temperature up a few notches. If you use oil or a thinner concentrate, your pen should be good to go right out of the box.
erictho Super Member ECF Veteran
hi. i tried this as a last resort to re-wick a poorly performing atomizer. i activated it a few times before removing the needle plate, but the wick remained in the atomizer. i used a small needle to push the wick from the battery end out, but the wire threading at the bottom of the wick unwound. using a needle was probably too thin?
Slim82 Full Member
Thank you for this in depth article. I am only seeing one picture, are there suppose to be others?
VictorySpeedway Full Member ECF Veteran
My son and I cleaned a two atomizers this afternoon using this method, and they are as good as new.
Mishy73 Senior Member ECF Veteran
I have had my eGo-T for about 3 weeks and cleaned it for the first time this morning using this method ... I can't believe how easy it was, just watching the video and following the instructions (using the pics as a guide). My Atomizer is now working like a charm. Can't get over how much vapour I'm getting again.
intime Senior Member ECF Veteran
We did it & it worked like a charm! Tried cleaning my first one by soaking in alcohol & then read/listened further and found out this is not the best method. I came back with my second attie to this video with the helpful further instructions that Shaka Zuluf included and am so pleased with the results.
doctroprint Full Member
First, I'm a heavy vapor... I have tried to clean atty's in the past with not much success what so ever.
nerojrnde Senior Member Verified Member ECF Veteran
Thank you so much! What an informative way to clean these attys. I will be sure to do this from now on!