SYSTEM LOCK/UNLOCK: Press power button 3 times. Press “+”and “–” buttons together to enter the setting interface. SMART VW: The power of device will be adjusted automatically according to the coils;
Full Answer
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
What are the different vaping modes and settings?
The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
How to turn on a vape pen?
HOW TO TURN ON A VAPE PEN . To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge.
How do I change my vape settings?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
How do you set the temperature control on a vape?
How to vape in TC. Put your mod into TC mode and select the corresponding wire type for the coils you have. If the mod has a TCR you can enter the exact TCR value. After that, ensure that your mod and tank are both at room temperature so the temperature readings will be more accurate.
How do you change the voltage on a vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly.
How do I set my vape wattage?
Once you know your coil's wattage rating, start at the very bottom wattage. Then, gradually turn it up by a watt or two at a time, taking an inhale in-between. If your vape becomes too harsh or hot or tastes burnt, you know it's a little too high, so turn the wattage back down.
What is TC mode?
Temperature Control (TC) mode allows you to set a specific temperature value on your mod at which your e-juice will be vaporized. Your mod will adjust its power output according to the set temperature value so that the coils temperature will remain constant and under control.
What do the colors mean on my vape pen?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How do I change the heat setting on my ooze pen?
If you use an Ooze vape pen regularly, you know that it's 5 clicks to turn on/off, 3 clicks to change the temperature setting, and 2 clicks to activate preheat mode. With each click, your vaporizer pen button will illuminate green.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What do the numbers mean on a vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
Does higher wattage mean more flavor?
If you want a stronger or smoother flavour: Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to clean a battery?
Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using. Avoid using and storing your battery in extreme temperatures, and always keep your battery away from water and extremely humid conditions.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
Do vapes need a charger?
Most vapes will either use a Micro USB charger, or come with a vape pen charger. VPM carries Vape Pen Chargers if you ever misplace yours, or if you just like to have extras around. Batteries will generally light up once they are plugged in indicate they are charging.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
Step1: Install the Coil
Take out the coil from the package of the TARGET PM80, and insert the coil firmly into the POD.
Step4: Power on the Device
Click the power button 5 times in 2 seconds to power on or power off the device.
Step5: Power Adjustment
TARGET PM80 is using the powerful GTX coil platform, and the suggested power need to be noticed before start vaping.
Step7: Charge the Battery
After connecting the USB cable to the battery, the battery indicator and remaining charging time will be showed on the screen.
Warnings
This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended to use in following cases:
