1, Press the fire button 5 times in quick succession to turn the device on/off. 2, After switch on, OLED display “KangerTech” at stand by mode. 3, Press fire button 3 times to choose VW/TC-Ni/TC-Ti/TC-SS/TC-NiCr modes. You can press “+””-” to adjust the wattage/ temperature.
Full Answer
Can you change the wattage of a kangertech atomizer?
KangerTech SUBOX Mini Starter Kit Instruction Guide and Manual. Step 1 – Unscrew the Subtank Mini (The Tank) from the Housing. After you have un-boxed the Kangertech SUBOX/ KBOX Mini, it will come already assembled ... Step 2 – Unscrew Subtank Mini Base with OCC (Organic Cotton Coil) Step 3 – Soak ...
Can kangertech ni coil be vaped at 20-45w?
Feb 06, 2016 · Wait a few minutes. Open the airflow ring back to where you get the draw you like. Start with the power at around 15W, take a few pulls, see how it vapes. Up the power slowly until you get a decent vape - decent vapor and flavor. If it's still too harsh, then it's time to look at your juice as being the probable cause.
Should I upgrade to the kangertech subox mini vape pen?
level 1. N64Overclocked. · 5 yr. ago. Volts and watts are dependent on one another. When you change watts, you change volts, and vice versa. You can't change one without changing the other. The subox allows you to adjust in watt increments, so if you want 4.5v, turn your watts up until it says 4.5v. if it won't go to 4.5v, your coil is probably low enough resistance that 50W won't …
How to set up a vape?
May 03, 2016 · The mod will read whatever ohms you have in your atomizer (tank). You don't change that on the mod itself. You change the ohms with different coils/coil builds. Whenever you take the tank off, it will ask if it's a new coil/tank or old. Just answer by hitting the up or down button (for yes or no) and the ohms will display on the screen.
Holly25 Full Member
I'm new to vaping and my friend set me up with the Kangertech Topbox Nano, which doesn't have all that much readily available online outside of reviews. I smoke cigarettes half a pack and day and am trying to quit.
Douggro Ultra Member
Do you know what resistance coil is installed in the tank? It should be displayed on the screen of your mod. Post back with that and we'll try getting you headed in the right direction.
Douggro Ultra Member
Pictures work marvelously. So you have the 0.5Ω coil installed. Which at 7.5 watts shouldn't be giving harsh hits unless:
Holly25 Full Member
All I will say to that is when you go into a store with someone who does it as well and you spend an hour like I did talking to someone at said store and both people encourage you in one direction and you don't know entirely what you do, sometimes the newbies may get in over their head, it happens.
Todd Larson Full Member
I'm new to vaping and my friend set me up with the Kangertech Topbox Nano, which doesn't have all that much readily available online outside of reviews. I smoke cigarettes half a pack and day and am trying to quit.
Holly25 Full Member
Pictures work marvelously. So you have the 0.5Ω coil installed. Which at 7.5 watts shouldn't be giving harsh hits unless:
Douggro Ultra Member
Thank you so much that was very easy for me to understand and I appreciate it! I will definitely try to do that. I think the liquid is to high, I figured that as much after I got home and thought about it for a bit, so I am going to try a lower mg and hopefully that works.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
How to thin out a PG tank?
If you want to thin out the juice you already have, you can add a drop or two of straight PG into your tank and shake well. If you don't have any PG on hand, you can also use a few drops of distilled (at the very least filtered) water right into your tank. Just so you know, this will dilute the flavor just a bit but if you don't use too much, you shouldn't notice.
How many watts does a 3.7 volt vape coil use?
Did you buy it online or at a local vape shop? 3.7 volts should be enough to power a .5 coil. That figures out to be about 26 watts
Can you run 70VG 30PG in a subvod?
I run 70VG/30PG in the Subvods I have, and they do very well. If your juice is too thick it won't wick very well. One thing is for certain, you will not win any cloud competitions with a Subvod. But they will produce pretty good with the right coil and juice.
Can a wattage device be variable?
You can't, it is not a variable wattage device.
Is 80% VG too thick?
If what you mean by max VG is 80% or better, than yes its too thick. What ohm coil are you using? Hopefully you are not running a Clapton coil, it needs more watts than the Subvod will put out.
Can Kanger coils get too tight?
The only thing I can suggest at this point is a juice with a little more PG in it. The vertical Kanger coils have cotton that can get packed too tight and won't allow good juice flow when using a high VG juice.
