Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option. On a touchscreen SMOK mod, simply tap the NEW option. If you’re using a non-touchscreen SMOK mod, toggle between the options using quick clicks on the fire bar, and when you have the right option selected LONG PRESS the fire bar to select it.
Full Answer
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
How do Smok vapes work?
SMOK vapes have a lock system. This system is a protective measure to ensure that the vaporizer doesn’t misfire while it’s stored in your pocket or purse. Unlock your device, which you can typically do with 5 clicks in rapid succession.
How do I change my Smok vape settings?
0:232:16SMOK Nord 2 Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd when you're wanting to adjust the wattage. Press the power button three consecutive times andMoreAnd when you're wanting to adjust the wattage. Press the power button three consecutive times and then continue pressing it to cycle through the watts.
How do you control a Smok vape?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you change the mode on a vape?
Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
How do you adjust Smok Acro?
1:533:05Smok Acro Pod Kit Unboxing and User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis can be altered by adjusting the slider found on the back of the device to your desired airflow.MoreThis can be altered by adjusting the slider found on the back of the device to your desired airflow.
How does the Smok vape work?
3:458:12SMOK NOVO 2 Vape Pod Review! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there you just plug it you want to let this sit for a good five minutes check it out she'sMoreAnd there you just plug it you want to let this sit for a good five minutes check it out she's already starting to wick bubbles bubbles bubbles bubbles. That's a good thing.
What wattage should I vape at Smok?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
What do the numbers on my Smok vape mean?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What are the modes on a vape?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
How do you use a Smok Acro?
1) Open the slot on the pod by pulling back the rubber plug. 2) Inject up to 2ml/ 0.07 fl oz of e-liquid into the slot and press the rubber plug back carefully and firmly. 3) Firmly push the pod back into the ACRO device until it clicks into place. 4) Wait 2-3 minutes before vaping.
How do you reset SMOK thinner?
Smok Thiner FunctionalityRapidly press the menu button five times to power the device on/off.Press the menu button three times to adjust the wattage/power settings.Press and hold the menu button to reset the puff counter.
Why is my Smok Acro firing on its own?
As you may have guessed, this is caused by a malfunction in the draw activation sensor, and can occur when you accidentally blow air into your mouthpiece instead of inhaling or when your device is exposed to extreme wind. There may be other reasons for your sensor to malfunction, but these are the most common reasons.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
How to get the best performance from a Smok Novo?
In order to get the best performance possible from your SMOK NOVO, you’ll want to prime the coils. Priming your SMOK NOVO’s coils ensures that the cotton inside the coil is adequately saturated before you use it and this, in turn, ensures you get great flavor from the first draw.
How to prime a Smok Novo coil?
And here’s how you prime your SMOK NOVO coils: ensure there is no juice in the pod when you remove it; take the new coil, drop vape juice onto the cotton, a few drops will do; insert it into the pod, fill with juice. Next, make sure there are no air bubbles.
What does it mean when your Smok Novo tastes burnt?
If your SMOK NOVO tastes burnt, it means the coil is spent. As soon as the flavor of your vape juice starts deteriorating, this is a sign that the coil is failing and you should think about swapping it out for a new one. Using the right type of vape juice is important too.
How many puffs does a smok novo have?
The cotton around the coil only has a certain amount of cycles – usually about 400 puffs – before it breaks down to the extent that it can no longer produce flavor. When this happens, the SMOK NOVO will produce a burnt taste. This means the coil is spent and it is time to replace it.
What is the size of a smok novo?
SMOK NOVO – The SMOK NOVO is the OG version of the line; it was the first pod vape to carry the branding NOVO. It has dimensions of 88.3 x 24.3 x 14.3mm and it uses a 450mAh battery.
Why does my Smok Novo autofir?
The autofiring issue on the SMOK NOVO is caused by vape juice getting into the air sensor. In order to stop the SMOK NOVO from autofiring, you’ll need to take the NOVO apart and wipe away any errant vape juice residue from inside the device.
Does the Smok Novo have buttons?
Designed to be compact and simple to use, the SMOK NOVO does not have any buttons and/or settings for you to worry about. Like the JUUL vape, the SMOK NOVO is a plug and play device – you fill up the pod with vape juice, insert it, power the device on, and start vaping. Simple, right? It really is.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
Why is my Smok Novo 2 not hitting?
SMOK Novo 2 Not Hitting. If your SMOK Novo 2 isn’t hitting, the most likely reason is that the battery simply isn’t charged. Connect the battery to the charging cable and allow it to charge fully before you try vaping again.
What to do if your smok novo 2 isn't charging?
If your SMOK Novo 2 isn’t charging, make sure that the device and charging cable are making a good electrical connection by removing dust, pocket lint and other contaminants from the charging port with a toothpick . If the problem persists, try a different cable and/or USB port. Don’t attempt to charge the SMOK Novo 2 with ...
How to avoid leaks in a Smok Novo 2?
You can also avoid leaks with the SMOK Novo 2 by making sure that you don’t overfill your pod. Leave a bit of room for air at the top of the pod when filling. Otherwise, when you replace the rubber stopper, you’ll force e-liquid into the pod’s atomizer coil assembly.
Why can't you inhale with a Smok Novo 2?
A second reason why it’s so important to avoid inhaling too firmly with the SMOK Novo 2 is because the excess e-liquid caught in the pod’s chimney and atomizer coil will eventually leak out of the bottom of the pod. If you spot a leak, clean the inside of the device with a paper towel.
How to fill a smok novo 2?
To fill the SMOK Novo 2 pod, remove the pod from the device and hold it so the pod’s rubber stopper faces up. Remove the stopper with your fingernail and add e-liquid until the pod is nearly full. Overfilling the pod can cause leaking, so leave a little room at the top of the pod before carefully replacing the stopper.
Why does my Smok Novo 2 make a gurgling sound?
If you hear a gurgling sound when using the SMOK Novo 2, you are most likely using too much air pressure when puffing on the device. The excess air pressure draws additional e-liquid into the pod’s atomizer coil and airflow chimney, which causes the gurgling sound and reduces vapor production. Use gentle air pressure when vaping.
How many mAh does a smok novo 2 have?
The SMOK Novo 2 features a miniaturized mainboard and chipset, creating room for a much larger battery. While the original SMOK Novo had a battery capacity of 450 mAh, the Novo 2 has an 800 mAh battery. The SMOK Novo 2 is compatible with SMOK Novo pods, and it also has an entirely new pod selection of its own.
