Press the fire button to choose among M1, M2 and M3 modes; 2. Press the “+” or “-” button to increase or decrease the TCR value according to the material of the coil you use; 3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting.
Full Answer
Is the Pico dual vape mod the best unsung Beast?
There’s no little doubt in my mind that the Pico Dual Vape Mod is an unsung beast, it has great power at 200 watts, temperature control options, memory settings, and pre-heat options for your coils. Everything you would expect from a 200 watt device and generally sold at a fraction of the competitions price.
How to replace a vape coil?
Next, unscrew the coil from the base of the vape by twisting it counterclockwise. Pre-saturate your new coil with 5 to 8 drops of vape juice so it won’t burn, then screw your new coil into place. After you put on the new coil, replace the tank and refill it with fresh vape juice.
How do I switch modes on my istick Pico?
Your iStick Pico has a few vaping modes to choose from. You can see your current mode by pressing the fire button 3 times quickly while the device is on and swap between the modes by pressing the up or down buttons to scroll through and then press the fire button to confirm your mode.
How do I use the cotton in my vape coil?
The cotton in your coil is brand new when you take it out of the package. If you place it directly onto your vape, it will start to burn. To avoid this, drip about 5 or so drops across the cotton from the vape juice bottle. Wait 30-60 seconds for the vape juice to absorb into the cotton.
How do I change the coil on my Eleaf iStick Pico?
0:583:16Tank stuck on istick pico fix - melo 3 atomizer - Change coils - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell you screw this off this makes it. So much easier to get this off because you get a grip. And.MoreWell you screw this off this makes it. So much easier to get this off because you get a grip. And. Once you screw that off. Here is your coil guys. So the cones release to get off just twist.
How do I change the coil in my vape?
How to Change a Vape Coil in a Pod SystemWhen the pod is empty, remove it from the device and hold it upside down.Twist the pod's base to loosen and remove it. ... Pull the old coil out of the pod.Push a new coil into the pod.Replace the pod's base and refill the pod.
How do you open an iStick Pico?
Simply remove the battery cap and pop your new battery into the iStick Pico with the positive (less exposed) terminal facing down into the device, and the negative end (more exposed) pointing out towards you! Screw on the battery cap and now you can power on the device by pressing the fire button 5 times.
How do you clean an iStick Pico coil?
0:221:19MELO III Mini Atomizer - Quick Clean Between Flavors - eLeaf iStick PicoYouTubeStart of suggested clipEnd of suggested clipYou can take the top off give that clip wave in there. Pull your glass sleeve. Up make sure you don'MoreYou can take the top off give that clip wave in there. Pull your glass sleeve. Up make sure you don't have any juice in there you can give that a nice little wipe like that.
How do you remove old coils?
3:075:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipStart by applying a firm grip to the base near the bottom of the tank. With your other hand beginMoreStart by applying a firm grip to the base near the bottom of the tank. With your other hand begin twisting the top portion of the tank in a counterclockwise manner. Now that the coil head is exposed.
How do you know when your coil is burnt out?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
What coil does the iStick Pico use?
Like its bigger brothers in the Melo line, however, it uses a full-sized factory coil head. Two heads are included in the Kit, both vertical Kanthal coils, in 0.3 ohm and 0.5 ohm resistances.
How do you adjust an iStick Pico vape?
7:2911:25Eleaf iStick Pico 75W TC & Melo III Mini Starter Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the fire. Button then you can adjust. And then hold the fire button or wait 10 seconds. To getMorePress the fire. Button then you can adjust. And then hold the fire button or wait 10 seconds. To get out in temperature control mode press the fire button four times to adjust the wattage.
How much is a iStick Pico?
Eleaf iStick Pico Plus Kit 75W Price $46.99 Online Sale | Vapesourcing.
How do you save a burnt coil?
Prime your coils: stop the burnt hitsTake a new coil out of the box.Drip some e-liquid on the wicking holes and inside the coil head (3-4 drops will do)Assemble your tank and fill it with ejuice.Screw your tank on your mod and set aside for 10 minutes.More items...•
Can you wash a vape coil and reuse it?
0:385:44How to clean you coils, wash and reuse sub ohm coils Save your moneyYouTubeStart of suggested clipEnd of suggested clipSo as you can see this coils looking pretty Brown. Probably time to be replaced. So we're just gonnaMoreSo as you can see this coils looking pretty Brown. Probably time to be replaced. So we're just gonna pull the coil out get a little bit of hot water going and rinse it out.
How long do vape coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
What is a Pico dual?
Designed and manufactured by Eleaf (Eleaf Electronics Co., Ltd.), the triangular-shaped Pico Dual is a dual 18650 device (batteries sold separately) with a footprint similar to the Wismec Reuleaux series. Measuring in at 44mm wide by 46 mm deep and 75mm at its highest point, its odd-shaped top limits the tank partnership to 25mm. That however is not an issue with so many great performers on the market, such as the Melo III mini that is offered with this device in a starter kit.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to take off a vape coil?
The coil is also called an “atomizer head” or “replacement head.”. You can use your hands or a paper towel to take off the coil. Twist the coil counterclockwise until it comes off of the bottom of your vape. A paper towel will help keep your hands clean.
How to get rid of burns in vape coil?
1. Pre-saturate your coil with 5-8 drops of vape juice. The cotton in your coil is brand new when you take it out of the package. If you place it directly onto your vape, it will start to burn. To avoid this, drip about 5 or so drops across the cotton from the vape juice bottle.
How to get vape juice out of tank?
If there’s any vape juice still in your tank, dump it out. Next, unscrew the co il from the base of the vape by twisting it counterclockwise. Pre-saturate your new coil with 5 to 8 drops of vape juice so it won’t burn, then screw your new coil into place.
How to unscrew a vape tank?
Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands. If there is juice in your tank already, you can use a paper towel to avoid getting your hands greasy.
Why does my coil clog up?
If it has a burnt aftertaste or if the flavor seems sour, it is time to change your coil. Over time the juice starts to clog up the coil. If you use sweet, sugary juices, they may clog up your coil more easily. The sweetener essentially caramelizes on the coil as it heats up.
Can you use more or less juice in a vape?
Use more or less juice, depending on the size of your coil. Make sure the coil you purchase is the right coil for your vape. Read your instructions to determine the type of coil or bring your tank to a local vape store.
Can you replace a vape coil with fresh juice?
If there is any vape juice still in your tank, dump it out in your trash can. This way, you can replace it with fresh juice after you put on a fresh coil. It is helpful to replace your coil with as little vape juice remaining as possible.
iStick Pico Best Settings
When it comes to vape, the best settings would be different for each person. So, it is impossible to share a setting that would be the best for everybody. As a result, in this section, we will tell you how you can get the best out of the iStick Pico.
Wrap Up
The iStick Pico might be an old device by now. However, a lot of people still use it. In this post, we have shared a few adjustments for the iStick Pico kit. You can try each of those, one by one. We hope you will find a setting that is the most suitable for you.
Kerrigor Full Member
So I have been vaping for about 2 months now and finally ive been able to quit smoking. About a week after I started vaping I jumped in to DIY. Ive made a few of my own flavours. I dont like the flavour to be too strong. Usually I keep it in the 5% ratio and I only use VG as the base. I also use 26ga Kanthal A1 for my coils.
Hitmetwice Ultra Member ECF Veteran
When you no longer enjoy the taste it's time to pull out the cotton, dryburn the coils and rewick.
Hendog24 Senior Member ECF Veteran
Cotton is cheap. I rewick my RDA daily when I'm using it. Coils on the other hand last me a month.
GeorgeS Ultra Member ECF Veteran
I've gotten +6mo's out of self wound coils. Unless you deform it badly while rewicking (and dryburnning) I see no reason to replace one.
rice721 1.21 GigaWatts! Verified Member ECF Veteran
when i just started vaping, rebuilding, DIY juicing I was keen on rebuilding / rewicking my RTAs. Would do it every other day.
Eskie ECF Guru Verified Member ECF Veteran
I vape more than one tank at a time, so I can get at least a week if not more from a wick. My coils are SS and hold up pretty well through several dry burns, so I can get a month if not longer out of one.
sofarsogood Vaping Master ECF Veteran
So I have been vaping for about 2 months now and finally ive been able to quit smoking. About a week after I started vaping I jumped in to DIY. Ive made a few of my own flavours. I dont like the flavour to be too strong. Usually I keep it in the 5% ratio and I only use VG as the base. I also use 26ga Kanthal A1 for my coils.
m1ke Senior Member ECF Veteran
Does anyone know of a way to force the "new coil up same down" on a Pico?
TheotherSteveS Vaping Master Verified Member ECF Veteran
take off the atty, press the fire button until it shows no atomizer then remount the atty. This should work if the resistance is significantly different to its previous reading.
m1ke Senior Member ECF Veteran
take off the atty, press the fire button until it shows no atomizer then remount the atty. This should work if the resistance is significantly different to its previous reading.
TheotherSteveS Vaping Master Verified Member ECF Veteran
OK, I figured that. The resistance is just very close. In fact, it's the same coil (SS). I just was wondering if that message was forcible.
m1ke Senior Member ECF Veteran
you could put a different atty on, fire, then try again with the original! Its like the DNA40 as far as this is concerned...bit of a pain to be honest..
How to unlock resistance on Pico?
In this mode you can lock and unlock your resistance when the Pico is on by pressing the fire button and up button at the same time for a couple of seconds. This will lock or unlock the atomizer base resistance.
How many batteries does a Pico have?
The Pico is powered by a single 18650 battery and charges through standard micro-USB for convenience. Firmware upgrades are also available through Eleaf's website and add additional settings and allow changes to be made to the logo and display layout.
What is a Pico mod?
The Eleaf iStick Pico is a box mod with 510 threading and a wattage range from 1 to 75W for compatibility with nearly every 510 attachment. It has temperature control modes for nichrome, titanium and stainless steel heating elements with a range of 200-600 degrees Fahrenheit. Temperature information, battery life, resistance and wattage are all displayed on the Pico's crisp OLED screen along with other alerts. The Pico's body is built from corrosion resistant aluminum-zinc alloy and stainless steel to be durable and long lasting. The Pico is powered by a single 18650 battery and charges through standard micro-USB for convenience. Firmware upgrades are also available through Eleaf's website and add additional settings and allow changes to be made to the logo and display layout. We suggest pairing it with a Saionara Vaporizer or the Saionara Top Airflow Vaporizer for some awesome clouds and great flavor!
What is the TCR of a nickel coil?
TCR values are dependent on the coils you use. Nickel coils have a range of 600-700. Titanium coils have a range of 300-400. A nickel and iron alloy will have a range of 300-400 and a Stainless Steel 303, 304, 316, or 317 coil will have a range of 80-200.
How long does it take for a Pico to shut off?
The Pico is built to protect your atomizer and will shut off output if a vaping time is longer than ten seconds. It will also display an alert on the screen to let you know! For Saionara atomizers, shorter button pulses will provide the tastiest clouds in our experience!
What is VW mode?
VW mode allows you to use a coil that has a resistance within a range of 0.1ohm-3.5ohm. You can adjust the output wattage from 1W to 75W using the up and down buttons. If you hold either button you can increase or decrease the wattage mode more quickly.
How to select M3 mode on Pico?
When your Pico is turned off, press the fire button and up button together to enter the TCR menu. You can press the up or down button to choose between M1, M2, and M3 modes and select one by pressing the fire button a single time .
