How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
Why is my aspire vape not producing vapour?
Taking a draw with a fully charged and seemingly working device only to produce no vapour is an annoying one of the Aspire vape problems, to say the least. This could be down to a couple of problems. Make sure you check that everything is connected tightly.
How do I change the atomizer coil on my aspire tank?
If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in. In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank.
Can you replace my aspire tank?
My Aspire Tank Is Broken! Aspire vaping tanks use durable borosilicate glass. It is possible to break the glass, though, if you drop your device on a hard surface. Many Aspire tanks include replacement glass enclosures, and you can also find Aspire replacement glass in our store.
How do I change my vape battery?
1:022:38How to change the batteries in your vape device - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd for you average person out there because there's no markings on the side of them often very hardMoreAnd for you average person out there because there's no markings on the side of them often very hard to know which is a positive which is a negative.
How do you open an Aspire vape?
0:121:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do I charge my Aspire battery?
Charging the Aspire K2 Starter Kit Plug the USB end of your charging cable into the charging slot at the end of the K2 battery and plug the other end into a USB charging port. Once plugged in, the LED will indicate the K2's charge status. When fully charged, the LED will flash blue and orange 20 times.
How do I turn on my Aspire CF VV?
When Using:Turn ON/OFF: Press button 5 times in succession in 2 seconds. ... Usage: Press the LED button and inhale at the same time.LED Light Indicator: Blue LED light will display for battery cell voltage of 3.5-4.2V. ... Output Voltage: 4.2V full power output.More items...
How do I unscrew my vape tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you open the Aspire k2 tank?
1:195:25NEW Aspire K2 Quick Start Kit Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking apart the tank is actually really easy because the threads are so clean all you do is pinchMoreTaking apart the tank is actually really easy because the threads are so clean all you do is pinch the top and the bottom and twist the top. It.
Can you charge a vape battery?
Hook your vape pen up to its charger using the included USB cable. First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
How long does it take for an Aspire vape to charge?
around 1 hourHow long does it take to charge the Aspire PockeX? When using the included USB charging cable the PockeX should reach full charge in around 1 hour. The light around the fire button will turn green when the device is fully charged.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you charge a aspire cf vv?
1:475:00Aspire CF VV 1300 mAh Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way it charges. You just keep the charge if it comes with it they have nice Chargers with aMoreThe way it charges. You just keep the charge if it comes with it they have nice Chargers with a spire.
Joe Raff Full Member
So my friend gave me one of his Aspire CF battery to try an fix for him. The battery will charge on the USB but does not turn on when clicking the button. Perhaps one of the wires inside disconnected.
Anemephistus Senior Member ECF Veteran
Disclaimer: Under no circumstances should anyone not familiar with electronics and with the safety practices surrounding them take apart a lithium battery housing of any kind. I do not suggest working on batteries and if you do so it is entirely at your own risk.
Joe Raff Full Member
I figured I should be using a vice if I am going to give it a try. Just an FYI I have taken apart 1 ego style battery before but it was a no name brand from a gas station that basically came apart on its own. I am experienced in electronics building laptops and desktops. I have worked on cell phones as well and understand the safety disclaimer.
Anemephistus Senior Member ECF Veteran
I figured I should be using a vice if I am going to give it a try. Just an FYI I have taken apart 1 ego style battery before but it was a no name brand from a gas station that basically came apart on its own. I am experienced in electronics building laptops and desktops. I have worked on cell phones as well and understand the safety disclaimer.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace glass in Aspire Triton?
To replace the glass, disassemble your tank and remove any glass fragments with tweezers. Push gently to get the replacement glass sleeve into position and reassemble the tank. Note that in the Aspire Triton, the glass is a permanent part of the upper hardware.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
