How To Build Your Own Vape Coils: The Tools You’ll Need
- Fingernail clippers/thin wire cutter
- Precision screwdriver set
- Kuro Koiler Tool (which I suggest)
- A pair of scissors for cutting your cotton
- An Ohms Reader is recommended but not required if you are using a regulated mod
- Kanthal Wire
- Organic Cotton
- Needle Nose Pliers
- Flat Nose Pliers
What is the easiest vape wire to build?
Vandy Vape wire is some of the easiest vape wire to build with. It’s effortless to shape and make coils with because it bends easily and stays in the shape that you build it to. Vandy Vape wire is super clean and it heats up evenly so the flavor that you get from your ejuice is always pure. Just like their tanks and mods, durability isn’t an issue.
How do you twist a vape wire?
There are many ways to twist wire, but one of the easiest is the pen method, used by Vape Don’t Smoke in the following video. Another multi-strand type of wire that doesn’t require tools and drills is the parallel coil.
How long should a vape wire be?
It is advisable to cut a clean piece of vaping wire from the spool with an approximate length of 3-4inches. Beginners can cut a little more like 5-6inches.
How to make a vape coil?
The first step towards building the coil is to cut the wire from the long wire spool. You can find these wire spools in the wicks and wire section under the Accessories category on the Wotofo website. It is advisable to cut a clean piece of vaping wire from the spool with an approximate length of 3-4inches.
Can you make your own vape coils?
Building your own coils puts you in the driver's seat. Rather than buying disposable coil heads every week, you can make your own. It's a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice.
What is the safest wire for vaping?
Stainless steel is the most unique of the common vaping wires. It can pull double duty and be used for straight wattage vaping or temp control vaping. Stainless steel wire is an alloy composed primarily of chromium, nickel, and carbon.
Which wire is best for vape?
Types of Vape WireKanthal is the most common wire used for vaping, and is a ferritic iron, chromium-aluminium alloy. ... Nichrome wire is another great wire that can be used for vaping, and is a nickel and chromium alloy.More items...•
What gauge wire is best for vaping?
Typically coil wire is somewhere between 22 and 32 gauge. Resistance, measured in Ohms is equally important. As the size of your wire goes up, the wire's resistance decreases. Therefore, a thinner wire with a 30 gauge will have more resistance but will also heat up quicker than a 22 gauge wire.
How do you make a homemade vape coil?
6:4411:11COIL BUILDING 101 - HOW TO MAKE VAPE COILS FOR BEGINNERSYouTubeStart of suggested clipEnd of suggested clipThe fibers of the cotton are flowing. Okay. So this one you want to eyeball it maybe say rightMoreThe fibers of the cotton are flowing. Okay. So this one you want to eyeball it maybe say right around there you cut it right cut yourself a nice strip. Just like that then you want to take this strip.
How many wraps Should a coil have?
How many coil wraps do I need? This depends completely on what type of coil you're building, your target resistance and even how much flavor you want from your coil. We'd usually suggest sticking to around 6 wraps as this will give you a good cross sectional surface area with decent flavor.
Can you use cotton balls as vape cotton?
The short answer is a firm, "NO!" Using a cotton ball as a vape wick can make you extremely sick or permanently injured. Cotton balls are not sanitary or food-safe. This lack of designation means right off the bat that it's a bad idea to ingest them or their fumes.
Is NiChrome wire safe to vape?
NiChrome is a good vape wire, but there are a few caveats to using it. Since it's an alloy of nickel and chromium, it has a really fast ramp-up time – it can heat up really fast, which means that complex coil builds can really benefit from it.
Is stainless steel good for vaping?
Stainless steel works in temperature control mode for those who prefer TC vaping. Since it also works in wattage mode, though, there's no chance of configuring things incorrectly.
Can you vape stainless steel in wattage mode?
Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Is titanium safe for vaping?
5:119:15The Burning Question: Is Titanium Safe To Vape? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is possible that titanium could combust titanium dust into small shards of titanium. It canMoreIt is possible that titanium could combust titanium dust into small shards of titanium. It can actually start to burn at temperatures as low as 330 degrees Fahrenheit.
What wattage should I be vaping at?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
Why do vapers not know coil building?
The reason being is that several vapers are actually unaware of what coil building is and how it’s done. Some vapers may hear of coil building but think it’s something that’s impossible for them to do themselves. Having the right knowledge is obviously important but using the right materials and tools is even more crucial.
What is SS wire?
Stainless Steel Wire. Stainless Steel is an alloy made of chromium, nickel, and carbon. You can find several grades of purity in this alloy depending on the varying percentage of different metals. 316-grade SS is the most commonly used stainless steel grade for building vape coils.
What is a coil jig?
Coil Jig is a vape tool that helps wrap the coil consistently. Further, it guides the wire to wrap on the rod properly. It is a useful tool to build coils with minimum effort.
How many slots are there in a dual coil atomizer?
In the dual coil atomizers, one must check for the positive and negative slots. There are two positive and negative slots for the dual coil building. In dual atomizers, the airflow remains on the side to reach both the coils equally.
What is coil resistance?
Coil resistance decides the power of the vape device and the amount of power it will draw from the battery. A low resistance draws high power from the battery hampering the safety of it. It can cause a battery explosion. Testing the resistance and identifying the problems prior to using the coil is a must.
What is Kanthal wire?
Kanthal wire made of ferritic iron-aluminum alloy is a suitable wire type for wattage vaping. The aluminum immunizes the coil from oxidation and rust. However, Kanthal will not suit the temperature control mode.
What is macro coil?
Macro coil builds: Macro coil builds are the coils with an inner diameter of more than 2.5mm. The bigger inner diameter has a higher resistance and vice versa. However, one can go for a Clapton coil build. Twist two different wire strands against each other to form this coil.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is macro coil?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
What is a parallel coil?
In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.
How to get a vape coil to glow?
Before it has a chance to cool down, grab your needle nose pliers and gently squeeze the two ends of your vape coil together. Rinse and repeat until your coil is glowing evenly starting from the centre and moving towards the outer wraps.
Where is the coil located on a vape?
The coil is either situated at the top or the bottom of the atomiser. While variations in coil design may change the vapor and flavor output, vape coils essentially all work the same way.
How to use coil jig?
Use your Coil Jig (which should still be through the centre of your coil) to push and pull the coil until it’s positioned exactly how you want it. When you’re satisfied with the position and the coil is as even as possible, remove the Coil Jig and give yourself a pat on the back.
What is the difference between 28 and 30 AWG wire?
It’s important to remember that the lower the AWG value, the larger the diameter of the wire. For example, a 28 AWG is thicker than 30 AWG wire. And size is important (sorry fellas…) Without getting too technical; the larger the wire,the lower the resistance which means a larger amount of power is required to heat it.
What is vertical coil?
The vertical coil can be wicked on either the inside or outside, which is more commonly known as a ‘chimney’ coil. These coils have gained popularity, due to the improved airflow and flavor as more of the coil surface area is in contact with the wick.
What happens when you heat up a mod?
When you fire your mod and heat the coil, the e-juice is vaporised and this vapor is what you inhale.
Is nickel a good heating wire?
Nickel has a very low resistance to electrical current, which means it’s one of the fastest heating wire types. However, it’s normally used only in temperature control mode so may not be the best choice for your first attempt at vape coil building.
Is it cheaper to build coils?
Building coils are cheap as it allows you to mainly use your own tools and household items such as nail clippers and plyers, but for people who would be interested in getting a kit look at something similar to the coil master kit.
Is RDA good for vaping?
When you are ready for a vaping experience that is more professional and a serious attack on your cigarette addiction, an RDA is a great and effective choice. Always treat your RDA, and any device with such powerful batteries, with extreme care.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is Kanthal wire?
Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc. It is easy to work with, yet stiff enough to hold its shape when formed into coils—which comes into play during the wicking process. It is extremely popular as a primary wire when building single-wire coils.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
Why do you need a TC wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
Can you vape with nichrome coils?
Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.
Top Vaping Wire for Building Vape Coils
Fortunately, we've taken care of the hard work for you. By trying all the most popular brands, our selection has been narrowed down to only the top products, making decisions easier.
Atomic Wire - Ohm Run Hitters
Atomic Wire Looks like any other vaping wire on the market. However, once it is inside your vape, the differences couldn't be any easier to notice. Other wiring brands haven't been nearly as durable, especially when heated frequently. Vapers often run through shoddy materials rather quickly, but these seemed as if they lasted forever.
Aspire Mini Triton Clapton Coil 5 Pack
Built for the Triton vape, the Aspire coils are a force to be reckoned with. Not only are they reliable, but they are also available with multiple wiring options. Nickel sounds like it's somewhere in the middle, neither too resistive nor conductive. You could also choose to work with some Kanthal wiring.
Smok V8-Baby Q2 Dual Core Replacement Coils (5 Pack)
Smok's coils are still some of our favorites, on account of how tasty they make each hit. The V8-Baby Q2s are from another planet, so to speak. Most coils, in today's market, are only meant to use a single wire. These, on the other hand, happened to take advantage of two of them. They are dual-coil-style coils.
Vaporesso C-Cell Coil 5 Pack
Vaporesso has been so great at meeting customer demands they've built their reputation on it. Other manufacturers stick to the same, tired and boring, concepts. Innovation hasn't been as common as it had been years ago. Yet, they've managed to break that trend, thanks to these unique coils.
KA1 100 Foot 22 Gauge Wire Spool - Demon Killer
For those who would prefer building their own vapes, this wire offers more than enough material to build several coils. As such, you'd only need to purchase a single spool for most purposes. 100 feet of wire could build dozens of functioning coils, each performing optimally.
Ni90 Comp. Wire - Mad Bomber Wire
Nickel still reigns supreme when it comes to coil-building. Other materials simply don't match nickel's unique characteristics. Fortunately, we've got plenty of options, so finding something perfect isn't a problem. Durable and conductive, coils built of this should meet even the most stringent expectations.
What is the easiest vape wire to build?
Vandy Vape wire is some of the easiest vape wire to build with. It’s effortless to shape and make coils with because it bends easily and stays in the shape that you build it to. Vandy Vape wire is super clean and it heats up evenly so the flavor that you get from your ejuice is always pure.
What is twisted wire vape?
Twisted Wire: Twisted wire is exactly what it sounds like. It’s two or more pieces of wire that have been twisted together to form one strand.
What is Ni80 wire?
Ni80 is an 80% chromium and 20% nickel alloy. Ni80 is less common than kanthal or stainless steel wire but it’s recently been seeing increased use for its clean flavor and fast ramp up times. It’s also easy to work with and holds its shape nicely. Nichrome contains a lot of nickel and so it’s prone to melting if you aren’t careful, but as long as you pulse your ni80 coils slowly and at a low temperature you won’t have an issue. Ni80 can only be used in wattage mode.
What is stainless steel wire?
Stainless steel wire is a chromium, nickel and carbon alloy. It’s unique among vape wires because it’s the only wire that can be used with both wattage and temperature control mode. Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping.
What is coilology vape wire?
Coilology. Coilology have vape wire down to a science and they’ve got one of the biggest varieties of vape wire style. The flavor from their wire is superb, it’s durability is excellent and it’s as easy as it gets to build with.
How much is coil master wire?
Coil Master is not only one of the best brands of vape wire that you can get but it’s also one of the cheapest. You can get a 30ft roll of kanthal wire for $5.50 which equals out to just about $0.18 per foot. But just because it’s cheap doesn’t mean it’s any less good.
Why is Kanthal wire used for vaping?
It’s the most common vape wire used for building because it’s inexpensive, widely available and resistant to oxidation. Kanthal has a slower ramp up time than stainless steel or ni80 wire and it’s arguably less flavorful than other types of vape wire.
