Full Answer
What size coil do I need for my first vape?
Oct 13, 2018 · Comparing Titanium to SS & Kanthalhttps://www.youtube.com/watch?v=zgh9DynkwHg Check out our Facebook & Instagram https://www.facebook.com/NicheVapes/https:...
What are vape coils made of?
May 14, 2020 · Before you start vaping on your new Ti coils, you need to calibrate your device. Let your coil cool back down to room temperature. Five to ten minutes should be plenty of time to let them cool. Screw-in your RDA and lock in the atomizer resistance (older DNA40 devices do not have an atomizer lock feature.
How to wrap vape coils?
Micro: a micro coil build is a coil that has an inner diameter of up to 2 mm. Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
What is the best vape coil to build?
Oct 30, 2018 · Let us get into the practicality of coil building, and what steps you have to take to make the perfect coil. Before starting, always use wire cutters to get a clean piece of vaping wire (approximately 3-4 inches in length) for your coil building. Kanthal wire is a …
How do you vape titanium coils?
1:0413:54TITANIUM COIL BUILD | TUTORIAL | ELECTRIC REVIEWS | DAVE GEEYouTubeStart of suggested clipEnd of suggested clipPull that wire straight get it as straight as you can this is a titanium wire is a little bitMorePull that wire straight get it as straight as you can this is a titanium wire is a little bit springy it's not too bad. It is not hard to work with at all. I get these little kinks out of here.
Can you make your own vape coils?
Building your own coils puts you in the driver's seat. Rather than buying disposable coil heads every week, you can make your own. It's a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice.Aug 16, 2021
How do you make a coil for a vape?
0:1411:11COIL BUILDING 101 - HOW TO MAKE VAPE COILS FOR BEGINNERSYouTubeStart of suggested clipEnd of suggested clipThis is the vape shears highly recommend them you're gonna need some ceramic tweezers a quailing jigMoreThis is the vape shears highly recommend them you're gonna need some ceramic tweezers a quailing jig or rod. You're gonna need some wire this is a simple round wire.
Are titanium coils good?
In addition to being lightweight, titanium coils are more resilient to fatigue, which means they are more durable and have a longer lifespan. Another great thing about titanium is that, unlike stainless steel, it doesn't rust and will retain its lustrous look for years to come.
What wire is used for vape coils?
Kanthal, stainless steel, nichrome, nickel and titanium are the five types of vape wire used for coil building. Nickel and titanium are considered more advanced types of wire and are only usable in temperature control mode.Apr 1, 2022
How do you make coil flavors?
4:119:39My Coil Build For Flavor - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere. So I like to just stick it horizontally right smack dab in the middle.MoreHere. So I like to just stick it horizontally right smack dab in the middle.
Can you build your own vape?
If you don't like what you can find in a store, or your budget doesn't match the device you want, you can literally go out and build your own vape.Dec 7, 2016
How do you make mesh coils?
4:2313:02Geek Vape ZEUS X MESH - How to build with Mesh Coils - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you loosen up the screw. They sometimes won't open up so you have to kind of use your fingerMoreSo when you loosen up the screw. They sometimes won't open up so you have to kind of use your finger to open up the clamp. Now. Before you mount the mesh strip get and grab that coiling.
How do you build lower ohms when building coils?
To lower the resistance of your coil, you can use a thicker wire. If you apply the same power to two wires of the same length but different thickness, the thicker wire will heat up more slowly. To reach a similar temperature in the same time with a lower resistance coil (thicker wire), you need to provide more power.
Are titanium vape coils safe?
The material safety data sheet (MSDS) for Titanium dioxide states: “Mutagenic for mammalian somatic cells. The substance may be toxic to lungs, upper respiratory tract. Repeated or prolonged exposure to the substance can produce target organs damage.”Feb 28, 2020
What is titanium vape?
Pure Titanium Vape Wire Titanium wire is still relatively new on the market and is used in many sub-ohm tank coil heads for Temperature Control. It is considerably stronger than Ni200, making it much easier to work with.Mar 21, 2016
Single Coil
I really prefer 24-gauge wire for single coils. I also prefer to wrap coils with a 3mm inner diameter. They are easier to build that way, and give lots of space for wicking and a bit of extra surface area. For the best compatibility across devices, I tend to prefer a target resistance of .15ohms – .25ohms.
Dual Coils
I prefer 26-gauge wire for dual coils. It has a higher resistance per inch than 24-gauge, and it’s easier to hit the target resistance across the two coils. You are shooting for the same target resistances that you are with a single-coil: 0.15 – 0.25ohms, and again keep it under .4ohms at a maximum.
Calibrating your device
Before you start vaping on your new Ti coils, you need to calibrate your device. Let your coil cool back down to room temperature. Five to ten minutes should be plenty of time to let them cool. Screw-in your RDA and lock in the atomizer resistance (older DNA40 devices do not have an atomizer lock feature.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
What is a parallel coil?
In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.
What is a small metal rod?
Small metal rod: a small screwdriver, or coiling tool. Organic cotton: or whichever wicking material you prefer. Scissors: to trim your cotton. Other (optional) accessories: An ohm reader: used to be a thing, but a regulated mod gets the job done. A coil jig: it can make your life a little easier.
What do you need to build a coil?
Before starting to build coils, it is necessary that you should be equipped with all of the necessary tools and hardware required for the job. A basic building kit contains everything you need, and every coil builder should have one in their vape cabinet.
What is coil building?
Building your own coil is a craft that every vaper can acknowledge. The craftsmanship required for a perfectly made coil is, at least, an intermediate-level job and it takes time and practice to achieve perfection. Coil building gained popularity due to the fact that one; it costs less in the long run, and two;
How to vape away?
Firstly, reassure the resistance of the coil and troubleshoot if required. Also, check that all connections and screws that you detached while building your coil are back where they’re supposed to be. Once all systems are good to go, it is time to reap your reward!
What kind of wire is used for coils?
There are five common types of wire material that are used for coil building. Among these five, only stainless steel wire can be used for both wattage control vaping and temperature control mode vaping – a one of a kind feat.
What is Kanthal wire?
Suitable only for wattage mode vaping, kanthal wire is made from a ferritic iron-aluminum alloy. Due to the presence of aluminum this wire roll is immune to oxidation and rust. Kanthal cannot be used for temperature control mode. The ease with which you can handle and manipulate kanthal makes it a perfect pick for new coil builders. It is soft enough to be molded effortlessly, but rigid enough to hold the coil-like shape. For these reasons, kanthal is the most commonly purchased wire among all wire types.
How to use wick in a smoke tank?
It is recommended to use organic cotton. Firstly, cut off a sufficient piece of the cotton with scissors then thread it into the coil, while making sure to leave half an inch of length on both sides of the coil. These ends should be long enough for proper fitting in the tank, but be careful as excessive wick could cause blockage in the smoke passageway.
What is stainless steel wire made of?
Stainless steel is made by combining chromium, nickel, and carbon. This alloy comes in different grades of purity, with varying percentages of the different metals. The most commonly used grade for stainless steel based vape wire is 316-grade SS, which is also used in the medical, pharmaceutical and food industries.
Where is the coil located on a vape?
The coil is either situated at the top or the bottom of the atomiser. While variations in coil design may change the vapor and flavor output, vape coils essentially all work the same way.
What is vertical coil?
The vertical coil can be wicked on either the inside or outside, which is more commonly known as a ‘chimney’ coil. These coils have gained popularity, due to the improved airflow and flavor as more of the coil surface area is in contact with the wick.
How to make a Kanthal coil?
You’ll need the following tools: 1 A length of Kanthal vape coil wire 2 Atomiser of your choice 3 A regulated mod 4 A Coil Jig (alternatively a screwdriver or drill bit will work in a pinch) 5 Needle nose pliers 6 Wire cutters 7 Ohm’s reader (if you don’t have a mod that can detect resistances) 8 Small screwdriver (these are usually included as part of your atomiser kit)
What happens if the resistance is too low?
If the resistance is too low, you’re in danger of drawing more current than your battery is safely able to deliver. This could have disastrous effects; at worst you may vent the battery and it could catch fire or explode!
Is NiChrome easy to build?
You do need to be aware that NiChrome is not quite as easy to build with as Kanthal. Primarily due to the fact it doesn’t hold its shape as efficiently.
puffon Vaping Master Verified Member ECF Veteran
I haven't wrapped Ti yet, but have wrapped Ni on 6-32 and 8-32 machine screws, to get the spacing even.
Bru2basics Senior Member Verified Member
I stuck this in my tugboat and it's working well. It's 2 strand 26g twisted 9 wraps gr1 titanium.
Nick N Ultra Member Verified Member ECF Veteran
Agreed. Best bet is to buy a device that can have the firmware updated. Stainless and NiFe wires are now becoming popular.
WharfRat1976 Vaping Master Verified Member ECF Veteran
I got some .6mm TI wire from sweet spot vapors. Any recs for a first build on my ipv4s? Thank you.
WiSK Senior Member ECF Veteran
I agree there are a lot of different opinions out there. That's why I was hoping to start a thread about titanium builds. Since everyone seems to have their own opinion. I've only done spaced coils so far. Kind of scared of developing any dioxide by pulsing the wire.
What is surgical stainless steel?
The most common "surgical steels" are 316 stainless and 440 and 420 stainless steels. There is no formal definition on what constitutes a "surgical stainless steel", so product manufacturers apply the term to refer to any grade of corrosion resistant steel. If you're thinking 316 SS, usually Chromium and Nickel are involved 316 stainless steel, also referred to as "Marine Grade Stainless Steel", is a chromium, nickel, molybdenum alloy of steel. 440 SS and 420 SS, also called "Cutlery Stainless Steel", are high carbon steels alloyed with chromium.#N#Titanium, however, is something being looked at.. But its resistance is fairly low, I do believe, and would take a temp controlled chip to work good. I believe there is such a chip coming out (GG? I think?)
Is SS like Kanthal?
SS (317,316)- appears to behave like Kanthal as far as working with it goes (coil building I just pulse rather than dry burn), has been used for a while in non TC applications, but it performs wonderfully in tc mode for compatible mods.
Is titanium wire hard?
Having used titanium wire in chainmaille work, it is VERY springy and quite hard. I should imagine that you would have to torch it extensively to get it to hold shape.
Is stainless steel coil safe?
Everything I've been able to find indicates that stainless steel is at least as safe as any other wire you might use for coils, if not definitively safer. People are swearing by SS workability, durability and clean taste. From what I can gather, it's not all that great on energy efficiency though.
