How often should I Clean my Mighty vaporizer?
If solely using herbs we recommend deep cleaning the Mighty Vaporizer every 30-40 sessions. The Mighty has only a few crucial pieces to clean and the Mighty Cooling Unit will account for the most of these Remove the cooling unit by twisting it off from the top.
How do I Clean my Mighty vape?
Before you get started, gather together some simple supplies to help clean your Mighty vape. You’ll need isopropyl alcohol, preferably 91 percent or higher, cotton swabs, and a glass jar or cup. Start by removing the cooling unit from the top of the Mighty.
How do I change the cooling unit on my Mighty+ vape?
Slide the Caplock towards the mouthpiece socket. The cooling unit splits apart into two pieces, and depending on how dirty your vape is, may give you a bit of trouble. With the cooling unit still attached to your Mighty+ vape, press down on the little button nub, where the cap lock sits, and pull up to separate the two pieces.
How long should I soak the parts of my Mighty mop?
The only part that you do not soak is the cap lock (the part with the Mighty logo on it) and the seal rings. The other parts will need to be soaked for around 30 minutes to remove dry herb debris, but you should never soak them for longer than an hour.
How do you maintain a Mighty vape?
Maintaining your Mighty Vaporizer Storz & Bickel recommends that you clean your device at least once per week. There are some people who like to wipe down the inside of the device with a cotton bud after each use while others wait for a longer time and complete a deep clean every once in a while.
How do I clean my Mighty plus vape?
0:532:14MIGHTY - How to Clean (by Storz & Bickel) - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean the filling chamber with a cotton swab that has been soaked in alcohol.MoreClean the filling chamber with a cotton swab that has been soaked in alcohol.
How long does the mighty vaporizer last?
90 minutesThe Mighty utilizes two lithium-ion batteries. It's hard to say how many bowls the Mighty can cook through on a single charge because it doesn't have a session timer, but 90 minutes of runtime is typical.
How do I clean my Mighty vape chamber?
1:5712:32How to clean your Mighty Vaporizer - Best tips and tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd are more effective when cleaning vapes and finally we are going to use the brush provided byMoreAnd are more effective when cleaning vapes and finally we are going to use the brush provided by Storz and Bickel it comes with the mighty. It's a handy little brush. Perfect for cleaning your device.
How do I clean my Mighty plus cooling unit?
Mighty+ Clean up: Quick summaryTake the Cooling Unit apart.Soak all parts except the Cap Lock for 30 minutes. Let dry.Wipe out the oven.Reassemble.Run a burnoff.
How many hits can you get from a Mighty vaporizer?
The Mighty uses a patented heater technology that blends convection heating with a conduction bowl. This hybrid heating is ideal for quick heat-up time and powerful vapor. The Mighty vaporizer will produce 8-15 good hits over a 3-6 minute session.
Does the Mighty vape get you high?
The Mighty Vaporiser heats the cannabis flowers or extract, which can then be inhaled to receive the herbs beneficial medicinal effects. Vaporized cannabis can give you different types of highs compared to taking the herb in other forms. This is due to the temperature used in the vaporization process.
Can you vape hash in Mighty vaporizer?
Manual butane gas heated vaporizers are very well suited to vaporize hashish. You are in control of the temperature, so you are not limited to a set temperature. Also, manual vaporizers don't have heating elements, so you don't have to worry about anything dripping on them.
What do you need to clean a Mighty Vape?
Before you get started, gather together some simple supplies to help clean your Mighty vape. You’ll need isopropyl alcohol, preferably 91 percent or higher, cotton swabs, and a glass jar or cup.
How to remove the cooling unit from a Mighty?
Start by removing the cooling unit from the top of the Mighty. Rotate the mouthpiece back and forth and gently pull it away from the cooling until it pops loose, then use the multi-tool to remove the tiny blue o-ring. Slide the cap lock -- the bit with the hologram -- away from the mouthpiece, pull it up and off, and set it aside. You don’t need to clean it, and doing so will discolor the detailing. Separate the bottom and top halves of the cooling unit by pushing down on the button right next to where the cap lock would sit. If it doesn’t budge, turn the Mighty up to high, let it heat up, then take several slow draws to loosen it up. Once separated, use the multi-tool to carefully remove the blue rings and screen from the lower half.
Can you clean an oven after each session?
The oven shouldn’t need much cleaning if you’ve been clearing it after each session. Turn the Mighty upside down, then take a cotton swab damp with isopropyl to swab it out, ensuring no liquid drips down into the heating element, which could damage the vaporizer.
Maintaining your Mighty Vaporizer
How often you need to clean your vaporiser will depend greatly on how often you use the device. Storz & Bickel recommends that you clean your device at least once per week.
The right cleaning tools
The first step will be to get the right tools to clean your vaporiser.
Take the vaporiser apart
Step 1: You will now have to use the tools that are provided with the Mighty Vaporizer to take all of the removable parts off. You will need to remove the cooling unit which is on the top of the vaporiser. This is done by unscrewing it until it loosens.
Soak the parts
You will now have to soak the removable parts in the isopropyl alcohol. The only part that you do not soak is the cap lock (the part with the Mighty logo on it) and the seal rings. The other parts will need to be soaked for around 30 minutes to remove dry herb debris, but you should never soak them for longer than an hour.
Mighty cleaning guide video
Check out our complete cleaning guide video for the Mighty VaporizerThis video is easy to follow and will have your favourite vape running as good as new in no time!
Take it apart
First, wiggle and pull the mouthpiece out of its socket. Then, slide the cap lock - the holographic logo - towards the mouthpiece socket, pull it up and off, and set it aside.
What to soak
Fill your container with a bit of rubbing alcohol and soak everything but the cap lock and o-rings for about 30 minutes, or until all the pieces are gunk free. Then, rinse each piece off with warm water and set them out to dry.
Clean the oven
While everything is soaking, take a cotton swab dipped in rubbing alcohol and wipe the oven clean of any sticky substances. Hold your Mighty+ upside down while you do this to keep the electronics safe from liquid damage.
Reassemble
Once all the other pieces are dry, it’s time to throw it back together. Insert the stainless steel screen back into the cooling unit, and put the o-rings back onto the mouthpiece and cooling unit. Then, put the two halves of the cooling unit back together, reattach the cap lock, and place the mouthpiece back into its socket.
Run a burnoff
Finally, we’ll run a quick burnoff to dissolve any leftover residue before it's ready for use. Turn your Mighty+ on to the highest temperature setting. Let it run through a full session until it turns itself off. And that's it!
Tips for a cleaner vaporizer
A deep cleaning will always be necessary at some point, but if you want to keep your vaporizer cleaner for longer, get in the habit of brushing out the oven after each session. A lot of buildup occurs as the vape is cooling down with dry herbs still inside, and this simple step will save you a lot of time in the long run.
tyler hixon
Tyler is a writer and photographer from Jacksonville, Florida, where you can find him reading on the beach, or on his longboard, carving up the streets of his neighborhood.
