Run a small screw driver through the airflow slots on the base. Hold the top of the tank and use the screwdriver to break it loose. After doing it the first time, it comes apart much easier in the future.
Full Answer
How to unscrew a vape tank?
Usually, there need to be a few other steps included to fully unscrew the vape tank First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank. Next, run a tiny screwdriver through the airflow slots and tap around a bit to loosen up the seals.
What is the mini super tank by Tobeco?
The Mini Super Tank by Tobeco combines the ease of top-filled method with the advanced airflow chamber for maximal vapor capability, all at an affordable price point.
What to do when your vape mod stops working?
This is particularly useful if your vape mod stops working suddenly. Knowing exactly how to disassemble your device and thoroughly examine each part will give you the information on what parts need fixing and on what stopped working. One of the most difficult parts of a mod to take apart is the firing button.
How do you get a vape out of a tight spot?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
How do I get the tank off my vape?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar. Now, don't mistake “hot water” for boiling water. The latter can break your vape tank.
How do you get a tank off a mod if it's stuck?
If the mod is intact, try a better grip. Similar to tank jams, sometimes your device just needs a little extra torque to release the tank from your mod. Find a sticky rubber material such as a mouse pad or rubber band to strengthen your grip.
How do you take the top off a vape?
Simply grip the tank's top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you've unscrewed the tank, you'll have two halves: the bottom hardware with the atomizer coil attached and the top hardware with the mouthpiece and the glass attached.
How do you change the coil on a Tobeco mini super tank?
0:562:28Supertank mini occ changing - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight make sure it's tight.MoreRight make sure it's tight.
How do you open a Smok tank?
0:143:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to change out your coil. You hold it tight here unscrew your bottom as you can seeMoreIf you want to change out your coil. You hold it tight here unscrew your bottom as you can see there's no ring right in here always make sure it's on correctly.
How do you get a dab pen unstuck?
Sometimes, you can simply jam a toothpick or safety pin through the small holes of the mouthpiece to dislodge whatever is clogging it up. This is especially useful if the clog is hard, due to crystallization of the e-liquid or burnt debris that takes on a resinous consistency.
How do you open a vape lid?
To open a childproof e-liquid bottle, grip the bottle with one hand, then push the cap downwards and twist anticlockwise. It might take a bit more force than you'd think! You might need to repeat the downward push/twist motion a couple of times to finally get the cap loose.
How do you open a vape bottle that won't open?
2:054:05How to EASILY open JAM MONSTER bottles (100ml & 120ml Chubby ...YouTubeStart of suggested clipEnd of suggested clipGive it a little squeeze. There. Top. Comes off screw it back on give it a little squeeze.MoreGive it a little squeeze. There. Top. Comes off screw it back on give it a little squeeze.
How do you open a short fill bottle?
It's simple enough. Pop the top open on your short fill eliquid bottle, squeeze in a nic shot, and give it a shake.
How do you fill a Tobeco mini super tank?
3:3014:28First Look: Mini Super Tank by Tobeco - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is how you fill the super tank. It has a one little hole for for breathing and you have yourMoreThis is how you fill the super tank. It has a one little hole for for breathing and you have your your filler okay the hole for filling. And you have your o-ring. This one is a little bit different.
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
Tobeco Super Tank Mini
The Mini Super Tank by Tobeco combines the ease of top-filled method with the advanced airflow chamber for maximal vapor capability, all at an affordable price point.
Ratings & Reviews
The products available on Element Vape are age-restricted and intended for adults of legal smoking age only. All orders placed on the website will be verified by an industry leading Age Verification software for validation.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
How to tear apart a vape atomizer?
To tear apart the vape tank and vape atomizer, you'll have to attempt to unscrew the vape tank. Usually, there need to be a few other steps included to fully unscrew the vape tank. First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank.
What is the battery of a vape?
Of course, the vape battery is an absolutely critical component of your device. This is what gives your device the power to be able to heat up e-liquid to turn into vapor. This is what allows your vaping sessions ...
Can you clean a vape mod?
Even though vape mods are designed with customizability in mind, cleaning them can still be a chore. From the many already built-in parts to the extra technology you add, the little nooks and crannies of your box mod that you need to take care of add up quickly. Fortunately, there are some good tips and ideas that will help you properly disassemble ...
