When using Distillate: Heat a small amount of distillate to 40-50 Degrees Celsius using a magnetic hotplate, then add 5% ratio of terpenes and blend well to combine. Allow the mixture to cool to room temperature and check the consistency. If it's still too thick for a cartridge, repeat the process until the desired viscosity is achieved.
Full Answer
Is MCT oil in marijuana vape products safe?
However, in March 2020, the Colorado Department of Public Health and Environment banned MCT oil in marijuana vape products. The suggestion is that MCT oil was one of the main culprits in the vaping illness epidemic of 2019 and 2020.
How do you add terpenes to distillate?
Place distillate in a jar (use glass), add the terpene profile you prefer (1-2 drops per gram of distillate oil) and mix in thoroughly. Leave in the glass jar, sealed overnight so the terpenes infuse properly. Adding terpenes to shatter is a little more complicated.
What is the ratio of CBD oil to terpenes?
The ratio for terpenes and oil can be to your preference, but I always recommend doing 5-10% Terpenes and 5-10%Viscosityy Booster for a total of 10-20%. For this video, we did 5ml (or 5 Grams) off full spectrum CBD Oil, 0.5ml of Terpenes, and 0.5mls of Viscosity Booster totaling 6mls (or 6 Grams) of finished product ready for use in a pen.
What are terpenes in vape cartridges?
The smell of fresh flower, The sweet citrus tang of an orange, These can all be attributed to Terpenes! Because of this terpenes are used for wide range of aromatherapy products, Topical ointments, and Food/Beverage products. But for the purpose of this blog, We're going to focus on the use of terpenes in vape cartridges.
Can you use MCT oil in a vape?
And, it has a neutral taste that doesn't interfere with the vaping experience, and can take on flavor compounds very well in flavored vape oils. MCT oil is being used as an alternative to PG and VG, which are the two ingredients that up until recently were used by practically all vape juice companies.
How many drops are in a ml of terpenes?
Each drop contains 0.05 ml so you would add roughly 12 drops.
How much oil do you put in a vape cartridge?
Typically, THC oil vape cartridge refills come in 1 g or 0.5 g amounts and deliver anywhere from 200-400 hits. Due to their highly convenient nature, an increasing number of consumers are buying THC oil cartridges to use on the go.
How do you mix terpenes with concentrate?
We recommend mixing 5-15% terpenes in your concentrate, of course adjust to your taste. ALWAYS test a small amount before mixing full batches, check for viscosity and flow when solution is cool and wait 24 hours. Both concentrates and terpenes are natural products and therefore subject to variation.
What is the ratio of terpenes to distillate?
Adding terps to distillate is super important especially since terpenes are usually boiled off. Place distillate in a jar (use glass), add the terpene profile you prefer (1-2 drops per gram of distillate oil) and mix in thoroughly. Leave in the glass jar, sealed overnight so the terpenes infuse properly.
How much terpenes do I add?
Adding Terpenes to Oils Finally, we can add some terpenes to promote the specific effects of our CBD or THC oils as well. In that case, however, we should follow the 2% rule or add 0.2 mm per gram of our oil. Using a syringe or a dropper while adding terpenes would allow us to be more precise.
How do you use terpenes in vape?
Select the terpenes you want, read about which you should be using to achieve the desired effect, and then simply add a few drops to your regular vape juice as you would any day. Terpenes are also used to make your e-liquid taste better or add a scent to the vape that reminds them of their favorite herbal drug.
Can I put distillate in a vape?
Vaping is one of the most popular and convenient methods for enjoying oil distillates. If you have a supply of distillate, you're either going to use a dab rig to consume it or a vape cartridge.
How much is a 1 gram cart?
If you're wondering “how much is a 1 gram cart?” -- CBD cartridges cost $70 each for full carts, but you can save $30 by purchasing a 2-pack and $40 by purchasing a 3-pack! We also offer 15% off your first purchase if you sign up for our email list (scroll to the bottom of this screen).
Can you mix terpenes with vape juice?
Adding terpenes to vape products improves the flavor, aroma, and effects of the vaping experience. Be cautious, however, when adding terpenes to individual vape cartridges. In most cases, a single drop of concentrated terpenes will be sufficient.
What do you dilute terpenes with?
Diluting terpenes means that you reduce the strength of the terpene in a substance or mixture. Carrier oils, concentrates, coconut oil, PG, and PEG are often used to dilute terpenes. A good rule of thumb is to never use more than 10% terpene in any product.
How do you mix distillate?
Drop the gram of distillate into the oil or butter and mix thoroughly to ensure homogenization. Place the combined distillate/oil or butter mixture into a microwave-safe dish and heat on medium power for up to two minutes to ensure all ingredients are combined. Your oil is ready to be infused into your recipe.
What are the Best Terpenes for Vape Carts?
In this guide we'll be using the Terp Liquefy Brand. Terp Liquefy is comprised entirely of 100% pure terpenes. It doesn't contain any additives like PG/VG/PEG, Coconut Oil, or Vitamin E Oil. It's just natural terpenes that are blended to match popular strain profiles. What sets this product apart, is that in addition to the strain specific terpenes, each blend is reinforced with additional odorless and flavorless terpenes that do a fantastic job of breaking down extracts and stabilizing them so they can be used in a cartridge without having to add any potentially harmful cutting agents.
How many drops of terpenes per gram?
Note: With this particular method, It's not recommended to add higher than a 25% terpene:extract ratio. That translates to about 10 drops per 1 gram of extract. If the extract is still too thick at this ratio, or is showing signs of separation. It means that there were just too many waxes and lipids within the extract to be broken down by terpenes alone. In this case, a few drops of an extract liquefier such as EJ Mix will be necessary to reach the desired consistency for a cartridge.
How to determine terpene ratio?
Steps to determine the correct terpene ratio for cartridges: Step 1: Add 1 Gram of extract to a mixing vial. Step 2: Decarboxylate the extract by heating it to 225F. This process can take up to an hour. You'll know the extract is decarbed when the bubbles start to dissipate. (see photo) Step 3: Add 4-6 drops of Terp Liquefy to ...
What are terpenes?
Terpenes are naturally occurring organic elements that that can be found all around us. They are the tiny elements that combine to create the complex aromas and flavors of organic matter. The smell of fresh flower, The sweet citrus tang of an orange, These can all be attributed to Terpenes!
Why are carts made from extracts?
That being said, Carts made from these extracts are amongst the best because of their natural taste and aroma. It's recommended to mix small test batches to determine the best ratio for any given extract.
Can Terpenes be used with Non-Winterized extracts (shatter, budder, wax, rosin, ect)?
Yes! 1-2 drops per gram can be added to greatly increase the flavor and aroma of a concentrate. When added in higher levels, Terpenes on their own can break down the extract to the appropriate viscosity for use in a cartridge without the need for a cutting agent. Determining the exact amount of terpenes to add depends on the starting material, we'll cover some steps in this guide to help determine the appropriate ratio.
What is MCT oil?
MCT oil is made from the fat contained in medium-chain triglycerides. Coconut oil and palm oil are two of the most common oils from which MCT is derived. Through a process called fractionation, MCT oil is separated from coconut or palm oil and concentrated. Research is emerging on potential therapeutic usages of MCT oil, ...
When will MCT oil be banned?
Colorado's Marijuana Enforcement Division banned MCT oil as a vape additive effective January 1, 2021. Other states that have banned MCT oil in vaping products include Ohio, Michigan, Oregon, and Washington, with more likely to follow.
What other harmful vape additives should consumers avoid?
The safest thing to do is to avoid any additives whatsoever, according to Rae. “Shop for pens that only contain 100% pure cannabis oil, with no added substances of any kind, including added flavors and even added terpenes, which have been shown to be dangerous too.” In the EVALI outbreak, most people had purchased illicit or low-end vape pens or cartridges to which the vitamin E may have been added because it's similar in appearance to THC oil and would allow the manufacturer to produce more vape juice with less THC oil.
How do you shop for vapes safely?
Even if you are shopping at a licensed dispensary, you still need to do some research into the product you are purchasing. Since states don't always require ingredients to be listed on vape cartridges, certainty can be difficult. Even experienced budtenders may not know. Rae advises consumers to check brand websites and packaging carefully. You may just need to shop around a bit. “Usually, the brands that use 100% cannabis and no additives are very proud of this fact, and they go to great lengths to brag about it. These are the products you are looking for,” Rae said.
Why is vitamin E added to vape cartridges?
In the EVALI outbreak, most people had purchased illicit or low-end vape pens or cartridges to which the vitamin E may have been added because it's similar in appearance to THC oil and would allow the manufacturer to produce more vape juice with less THC oil.
What is the CDC's vaping illness?
Vaping illness has been a frequent topic in the news since August of 2019 when the Centers for Disease Control (CDC) began tracking cases. Formally called EVALI — e-cigarette, or vaping, product use–associated lung injury — the condition has affected thousands of vape product consumers, most of them under the age of 35.
Why are vape pens so popular?
Cannabis vape pens are growing in popularity due to their convenience and perceived safety in comparison to smoking.... Read More. By checking this box you consent to Weedmaps' collection of your email address for the limited purpose of subscribing to Weedmaps' email communications.
How many terpenes are in a strain of cannabis?
Not only are there over 200 distinct terpenes that can be present in Cannabis but often times there are over 50 different terpenes in just one strain. These smells range from gassy, to citrusy, to earthy, and even fruity. Play around with different strain profiles until you find one that fits you perfectly.
What are terpenes in cannabis?
Terpenes are all the rage right now with a wave of new terpene infused products that will both capture the cannabis audience as well as pique the interest of the health-conscious consumer . Terpenes are credited with giving Cannabis flower a uniquely broad spectrum of scents, tastes, an have even been proven to influence the effects of your high. Some terpenes like Limonene increase energy while some terpenes like myrcene promote relaxation so it is essential to choose a strain profile or terpene combination to support the type of feeling you would like to experience. Not only are there over 200 distinct terpenes that can be present in Cannabis but often times there are over 50 different terpenes in just one strain. These smells range from gassy, to citrusy, to earthy, and even fruity. Play around with different strain profiles until you find one that fits you perfectly.
How to pick a vape cartridge?
Having a quality vape cartridge ready for stores often starts with picking quality vape cartridge hardware. Cartridges these days are often prone to leakage or damage during shipping. To save yourself a headache be sure to buy cartridges from a reputable supplier here in the USA. There are various styles to choose from but what it comes down to is your preference in design and the viscosity of your oil. For the design, there are options for wood, ceramic, plastic, and metal mouthpieces options as well as various shapes and sizes for tanks. Cartridges usually come standard with a 2mm diameter intake hole which can be seen inside the cartridge tank. This hole is where your oil will enter to meet the atomizer which will atomize or “vaporize” your oil into an inhalable vapor. High viscosity oils are typically a sign of pure oil indicating that only terpenes were mixed in. When high viscosity oil is put inside a cartridge, it produces an air bubble that does not easily move when the cartridge is flipped upside down. Low viscosity oils produce a faster moving bubble and are typically made by blending viscosity booster/liquefier/diluent and terpenes with the Cannabis or Hemp oil. Low viscosity oils may require a smaller intake hole to prevent leakage but using a quality cartridge should prevent dilutions of up to 30%, more on this later.
What is a viscosity booster?
Viscosity Booster. Viscosity booster is a great way to control your potency and stretch your dollar. Viscosity Booster also makes for a smoother smoke as it allows the concentrate to be turned into vapor with less heat than the oil alone.
What size intake hole does a cartridge tank have?
Cartridges usually come standard with a 2mm diameter intake hole which can be seen inside the cartridge tank.
How to know if oil is ready to go?
Check to see if your oil is warmed up – It is ready to go when the oil is fully liquified, and there are no chunks of concentrate at the bottom or floating around.
When is oil ready to be poured?
After the oil mixture is inside the syringe, it is ready to be poured inside the cartridge.
What are the ingredients in vape juice?
What Are the Active Ingredients in Vape Juice? 1 Cannabidiol (CBD): CBD is the non-psychoactive component of marijuana. Many consume CBD oil to help treat conditions like pain, anxiety, and insomnia. 2 Tetrahydrocannabinol (THC): THC is the psychoactive component of marijuana that gets people “high,” sometimes causes mild hallucinations, and can increase the appetite of those with serious medical conditions like AIDS and cancer. 3 Caffeine: The most widely consumed psychoactive drug around the world, caffeine is a stimulant of the central nervous system from the methylxanthine class. Many people consume it in caffeinated sodas and coffee, but it’s available in vape form as well. 4 Nicotine: Nicotine is the addictive substance in tobacco plants (among others), but it can also be produced synthetically to help people quit smoking tobacco without painful withdrawal symptoms. 5 Vitamin B12: Also known as cobalamin, vitamin B12 is a water-soluble vitamin that plays a role in the metabolism of every human cell and is often deficient in vegetarians, vegans, and those with malabsorption disorders of the gut like Crohn’s disease and leaky gut syndrome. 6 Melatonin: An important hormone for regulating the sleep-wake cycle, melatonin as a supplement is used to naturally encourage sleep for those with jet lag, late-night shift work, or trouble sleeping.
What is the dissolving agent in vaporizers?
Here are the various dissolving agents they may use. Hemp oil: Cold-pressed from hemp seeds, hemp oil has a nutty flavor, is sometimes used as a cooking oil, and is used as a non-psychoactive carrier oil in vaporizers. It is distinct from cannabis oil (which is oil made from the Cannabis plant’s flower and naturally contains THC).
What are the four carrier substances?
Specifically, they tested four carrier substances: propylene glycol, vegetable glycerin, polyethylene glycol 400 (PEG 400), and MCT oil. Each of these compounds was heated to 230 °C, and their vapors were then tested for the known toxins formaldehyde, acetaldehyde, and acrolein. The analysis showed that PEG 400 created significantly more ...
What is a cbd oil?
Cannabidiol (CBD): CBD is the non-psychoactive component of marijuana. Many consume CBD oil to help treat conditions like pain, anxiety, and insomnia.
What is the substance in tobacco plants?
Nicotine: Nicotine is the addictive substance in tobacco plants (among others), but it can also be produced synthetically to help people quit smoking tobacco without painful withdrawal symptoms.
Is it safe to vape with MCT oil?
Long story short: vaping with MCT oil causes significantly less harm than vaping with synthetic oil compounds, but abstaining from vaping altogether is still the safest option of all, especially while these products are still in their infancy and haven’t been exhaustively studied yet. Nevertheless, vaping is still safer than smoking traditional cigarettes, so talk to your doctor or trusted health care professional to decide what the healthiest choice is for you today.
Does PEG 400 contain formaldehyde?
Their conclusions were clear: propylene glycol and PEG 400 produced high levels of acetaldehyde and formaldehyde when heated, but naturally derived vegetable glycerin and MCT oil did not. In fact, one inhalation of PEG 400 could expose you to 1.12% of the daily exposure limit of formaldehyde, which is, of course, ...
How to add terpenes to distillate?
Adding terps to distillate is super important especially since terpenes are usually boiled off. Place distillate in a jar (use glass), add the terpene profile you prefer (1-2 drops per gram of distillate oil) and mix in thoroughly.
How much terpenes are in a gram of shatter?
You need to know the total weight of the shatter in order to add the properl 1-2 % terpenes. This is about .02 grams of terp per gram of shatter. If you are new to shatter this might be a little bit tricky because it needs to be done BEFORE the shatter full dries.
What is a beta caryophyllene?
Beta - Caryophyllene: This peppery terp goes both ways, it can be invigorating but also relaxing. Some like to add this one when they are looking to calm down the stronger effects of some cannabis strains. This terp is the exception to a few rules.
Is cannabis a terpene?
OK so are terpenes cannabis or not? They aren't, they are terpenes. They can be derived from plants, whether it is cannabis or other ( ours are plant derived terpenes). What they can do is control the uptake of cannabinoids and increase the therapeutic actions.
Does terp activate CB2 receptors?
This terp is the exception to a few rules. It plays well with ALL other terpenes, and is the only terpene shown to directly activate CB2 receptors in the brain. It acts almost like cannabis in this regard, even though it isn't.
Is terpenes created equal?
Not all terpenes are created equal which is one of the reasons we have tight quality control and rigorous testing. If you are new to terpenes, new to cannabis or just curious we want you to feel comfortable with what you are doing. It's fairly simple once you understand whats up!
Is terpene a concentrated compound?
Terpenes are HIGHLY concentrated plant compounds (think essential oils, but way more potent!) so a little goes a LONG way. Let that last statement sink in.... a LITTLE is all you need, add to much and it will ruin the whole experience (and your beverage or your bud)
What is CO2 Oil for vaping?
CO2 (Carbon Dioxide) is one of many extraction methods for creating oils from cannabis plants. CO2 is a gas, but with enough pressure, it can change to its liquid form. The cannabis plant is processed in the liquid CO2, which allows the cannabinoids and terpenes to separate from the remaining plant material, creating a concentrated oil.
What is the best way to settle the C02 vs Distillate debate?
The best way to settle the C02 vs distillate debate is to vape both and see which one you like more!
What is distillate?
Distillate is a highly concentrated extraction method to separate terpenes and cannabinoids from the original cannabis plant. Distillate can form either CBD or THC concentrates from extracted cannabis oils.
What is extraction in cannabis?
Extraction is the process of separating cannabinoids and terpenes from the rest of the plant materials to create cannabis concentrates. Cannabinoids and Terpenes are responsible for the euphoric, psychoactive, aromatic, and flavourful properties of the cannabis plant.
What is the difference between distillate and CO2?
CO2 oil contains a full spectrum of flavour and taste profile s that add some zing to your cannabis experience . Distillate has a higher concentration that requires less product and gets straight to the CBD/THC point. Here are a few other benefits to each of these distinct types of cannabis concentrate products for vaping:
What is a vape pen?
Vape pens are a smoke-free way to enjoy various cannabis concentrate products without the need for hazardous ash or flames.
What is the effect of refined oils on cannabis?
Refined oils created with chemical solvents reduce the natural, complex chemical profile of the plant, isolating cannabinoids into a single compound .
What Is MCT Oil?
Medium-chain triglycerides is another substance without color or smell. It is made from palm oil and coconut oil. It has recently become a popular thinning agent in vape juice. Companies also use MCT as a carrier to help improve the bioavailability of CBD.
What is the best thinning agent for vaping?
Vape juice requires a thinning agent. Otherwise, the liquid will get clogged up in a vaporizer. The most popular thinning agents are medium-chain triglyceride (MCT ) oil, propylene glycol (PG), and vegetable glycerin (VG). This article compares the three and outlines why MCT oil is the best option.
What temperature does a thinning agent need to be heated?
It analyzed four commonly used thinning agents: MCT, VG, PG, and PEG 400. The researchers heated all four to a temperature of 446 degrees Fahrenheit ( 230 degrees Celsius). Then they tested the vapors for formaldehyde, acrolein, and acetaldehyde. All are known carcinogens.
Why is VG used in food?
Manufacturers use it as a thinning agent because it has a mild and sweet taste and no odor. VG is widely used in the cosmetics, food, and pharmaceutical industries. For example, you can add it to foods to ensure water and oil-based ingredients mix. VG can also moisten or sweeten the final product.
Does MCT oil help with ketosis?
Unlike other fats, they go directly from the gut to the liver. At this point, they are used as an energy source or turned into ketones. Ketones are produced when the liver breaks down a significant amount of fat.
Does MCT oil cause pneumonia?
Some physicians have gone on record as saying that MCT oil can cause lipid pneumonia. It is a condition caused by fat particles entering the lungs. At present, the evidence clearly linking MCT oil with this condition isn’t concrete or plentiful.
Is thinning agent safe?
Evidence to date suggests that it is the safest thinning agent option. The Journal of Alternative and Complementary Medicine study found that it didn’t produce many of the tested carcinogens.
