The amount of flavour will vary slightly depending on the LV level of your base. The ideal mixture is: - 13% concentrate in a 70/30 PG/VG base
Full Answer
How much nicotine should I add to my vape eliquids?
Let’s say you normally vape at 3mg/ml. In order to top up your doubler (15mls in a 30ml bottle), you will need to add 15mls of 6mg/ml flavourless nicotine eliquid. The final bottle will contain 30ml of 3mg/ml flavoured eliquid. So there we have it, your basic guide to adding nicotine to your eliquids.
What is the best flavour strength for vaping?
Flavour Art recommend 3-5% for their concentrate range. We have found that this kind of strength would only be suitable for vapers that like very subtle mixes though. There are several that we prefer up at 15% or so.
What flavour percentage should I use for DIY e liquid?
What Flavour Percentage Should I Use For DIY E Liquid? Everyone has very different tastes when it comes to the amount of flavouring in an e liquid. One person may find a certain flavour overpowering at 10% while another thinks it is too weak at 15%. There will always be a lot of trial and error in mixing your own e liquid.
How do I use the 18mg button on a vape?
The first step is to select the 18mg button if you are using 18mg nicotine liquid, or set the strength of the liquid you are using. Next you need to select what base your nicotine is in.
How much flavor should I add to my vape?
The recommended dilution for E-Flavors is approximately 10%, so if we are making 50mLs I'll need 5mL. Using a different (clean) syringe we will measure and transfer the flavor concentrate to the bottle just as we did the nicotine. Be aware that flavor concentrates are very complicated artificial flavors.
How do you mix aroma and base?
Each product fact sheet for an aroma has the number of drops that you should add to a 10-ml base. Note that 1 ml of flavour is the equivalent of 30 drops. If you need to put 10% of the aroma in a base, you therefore need 10 ml for 100 ml, and thus 1 ml of aroma or 30 drops for 10 ml of base. See examples of recipes.
How much liquid should I put in my vape?
Put 1 drop of e-liquid onto each cotton hole in the coil. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil. There will most likely be about 6 holes for you to put drops into.
How much nicotine do I add to 60ml to make 6mg?
If you have a 60ml bottle and you want a nicotine strength of 6mg, first remove 3.6ml of flavour from the bottle and then replace it with 3.6ml of nicotine base.
How do you use e-liquid base?
Step-by-step mixingGet your equipment ready to use, your recipe ready to follow and your gloves on. ... Next add the flavours. ... Add your nicotine, if you are using it. ... Give your ingredients a good mix in the beaker. ... Steep your e-liquid for the recommended time. ... Your e-liquid is now ready to vape!
How do you mix vape concentrate?
An easy guide to mixing Vampire Vape e-liquidUse the mixing beaker to blend the liquids together.Add 10ml (10g) of Blood Sukka concentrate (mixed at 20%)Add 5ml (5g) of PG.Add 26.67ml (33.60g) of VG.Add 8.33ml (10.5g) of nicotine based in VG.Mix them together and pour into a 50ml bottle.More items...•
How much NIC shot for 50ml?
1 nic shotFor each 50ml of nicotine-free e-liquid, you add 1 nic shot.
How do you put flavour in a vape?
2:273:37Beginner Vaper Tutorial: How to Fill a Vape Tank - ecsupplyinc.comYouTubeStart of suggested clipEnd of suggested clipHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like soMoreHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like so once you've filled your tank to their desired.
What is the best ratio for vape juice?
90VG/10PG. For those who are less concerned with the flavour of their e-liquid and enjoy producing massive clouds when vaping, 90% VG/ 10% PG is the perfect ratio. This mixture is ideal for use on high wattage vape devices.
How much nicotine do I add to 60ml to make 3mg?
An 18mg nic shot added to 50ml of nicotine-free e-liquid will give you 60ml of 3mg liquid, but as you start dealing with smaller or larger short fills and higher or lower concentrations of nic shots, it can get confusing how much nicotine you'll end up with, and fast.
How much nicotine do I put in my vape?
Nicotine shots come in a variety of different strengths, but the most common one is 18mg. This is because vapers usually want their e-liquid to be 3mg or 6mg - an 18mg nicotine shot is the easiest option for creating this overall strength.
How much nicotine should I add to 100ml?
100ml short fill – add two 10ml 18mg nic shots to take it up to 3mg. 500ml short fill – add a 10ml 18mg nic shot to take it up to 3mg.
How to get the best flavour out of a bottle of juice?
Steeping is a personal choice, most of our fruit flavours are good to go straight away, but oxidising the liquid over a few days will help improve the flavour. To get the best flavour out of the liquid, shake the bottle, then crack open the seal, squeeze a bit of fresh air in to oxidise the juice, then replace the cap & give it a good shake, or leave in a safe place (i.e. a dark cool cupboard) with the lid off for a few days.
How many ml bottles are in a mixing kit?
The kit contains everything you need to start mixing your own liquid from measuring syringes, 10 x empty 30ml and 10ml bottles to store your liquid in, and, of course, all the ingredients you need. Click here to view the DIY Mixing Kit.
Can you add diluents to VG ratio?
Here, you can input your desired overall VG and PG ratio. We advise not to add extra diluents, however if you need to our calculator allows you to do so.
Does nicotine have a VG?
Nicotine also has its own VG and PG ratio, just input the ratio in this section as displayed on the nicotine bottle/label (select “Custom” and change accordingly).
What is AVG in a liquid?
AVG stands for aqueous vegetable glycol, which is essentially just vegetable glycol thinned down with 10% distilled water. Ideal if you want to mix at a higher VG ratio without ‘gumming’ up your coil! Also especially handy for those of you with a PG intolerance! If you want to use our e liquid calculator to mix with AVG, ...
Can you add a dilutant to a VG e-liquid?
Dilutant can be added ( distilled or pure water, even vodka!) to ‘thin’ your e-liquid. This is mainly done when using high or Max VG e-juice due to its thick consistency. Diluting thick e-juice helps your wick saturate more efficiently and even helps prolong your coil!
Can you mix e liquid?
Yes you can! Experimenting with different flavor mixes is one of the best reasons to start mixing your own e-liquid! Just hit the ‘Add’ flavor button on our e liquid calculator to add extra flavors! We’ll be adding our top picks for flavor recipes in the near future so be sure to check back soon!
Can you use nic salts with freebase?
Yes you can! They’re calculated in exactly the same way, just input your ‘Nicotine Base Strength’ and ‘Target Nicotine Strength’. Generally speaking, there’s very little difference other than the ‘Throat Hit’, which is less harsh when using Nic Salts compared to the same strength of Freebase Nicotine.
Is e-liquid dangerous?
It’s considered a toxic substance and dangerous if not used with precaution! If you’re a complete newbie to the world of DIY e-liquid mixing then be sure to start by reading our complete beginners guide to mixing your own e-juice. Alternatively, if you’ve come here with a Nicotine Shot or Shortfill bottle, head on over to our Nicotine Shot & ...
Step 1
The first thing you need is a recipe. Check out our wide range of e-liquid recipes and choose your favourite. Just click here. After you have chosen your recipe, you then need to decide what VG and PG ratio you wish to create, the nicotine strength and how much you wish to create.
Step 2
The easiest step of all. Simply go to our e-liquid calculator. Click here.
Step 3
So now the fun begins. All you must do now is input everything. So, to start off with move the slider to your desired ratio. For me, it will be 70% VG and 30% PG.
Step 4
Now you need to think how much you want to make. I want to make 60ml, as this flavour is spot on.
Step 5
Here is the nicotine section. This can look a bit confusing for a first timer, but don’t worry you are in my hands. The first step is to select the 18mg button if you are using 18mg nicotine liquid, or set the strength of the liquid you are using.
Step 6
This bit is simple, all you must do is input the flavour percentages from your found recipe. For me, I will have to input Sweetner - TFA at 3%, Blueberry (wild) - TFA at 10% and Vanilla Cupcake (DX) - TFA at 7%. All our flavours here at Make My Vape are PG based, but if you happen to be using VG based flavours just click the VG button.
Step 7
Now your recipe is ready to view. Its so simple to follow, the calculator has broken down each element to put into your e-liquid. All you must do now is make it by following the given amounts. The exact measurements can be found you the calculator page and will look like this...
How much capella concentrate should I mix?
Capella – 15%. We recommend mixing test batches of Capella concentrates at around 15% for a medium strength flavour. However, you may find yourself mixing some at 20% or even 25% if you prefer fuller flavoured liquids.
How much flavor West is recommended?
Flavor West recommend 15-20% across their entire range. This is pretty accurate, so we’d suggest mixing test batches at the 15% mark and taking it from there.
What percentage of concentrates are good?
Most of our own brand concentrates work great at around the 15% mark. There are some we feel work better a bit stronger – such as Pear Drops (20-25%). Others we feel need less – like the Spearmint (5-10%). While you get used to the flavours, we’d suggest starting with initial mixes at 15% and then adjusting to your personal taste.
How to tell if a flavour is strong?
Use your sense of smell. Generally, if a flavour smells very strong it will need a low percentage in the mix – and vice versa.
Can you mix your own E liquid?
There will always be a lot of trial and error in mixing your own e liquid. You will make a lot of bad mixes along the way. But it is worth all the pain for when you find those amazing combinations that are vaping heaven!
Can you mix Capella flavours?
It is certainly not always true, but often most flavours from a manufacturer will need mixing at similar strengths. So, for example, if you liked one Capella flavour at 10% (which is fairly low), it would probably be a good idea to mix test batches of other Capella flavours at around 10%.
How to clean nicotine from a bottle?
Check to make sure that the bottles aren’t leaking; check caps and the outside of the container for small punctures or signs of damage. If it is leaking, wear gloves, transfer nicotine to a safe, closed container and wipe up residual nicotine with a wet warm cloth, and dilute/wash in a sink with warm water.
How to store nicotine for kids?
Treat nicotine as you would any other toxic chemical, and store your nicotine in a secure location, preferably with a lock. Nicotine will stay colorless and tasteless longer when refrigerated.
Why does nicotine have a yellow color?
Nicotine is a natural item and needs to be stored in certain conditions to extend its life and avoid degradation. Over time nicotine can turn a variety of colors (yellow, pink, brown and even a bluish green color) and develop a distinctive smell and peppery taste. There are several factors involved. The main ones being oxidation, UV light and heat. Because PG and VG act as preservatives, the higher the milligram strength of your nicotine, the faster it will degrade. PG is the better of the two as a diluent when it comes to preservation.
What to do if you spill nicotine?
If there is a spill and nicotine makes contact with your skin, wash yourself immediately. If you start feeling sick or notice symptoms such as fatigue, dizziness, fast and/or irregular heartbeat, upset stomach or pain, go to your nearest emergency room.
Can you refrigerate nicotine?
If you plan to refrigerate your nicotine, please take precautions such as a separate, lockable refrigerator or lock box inside the refrigerator to prevent contaminating food and access by children. Keep it away from children and pets. As parents or caregivers of children, it is your responsibility to keep them safe.
Can you use a different container for storing nicotine?
Don’t use everyday household equipment, especially equipment or containers used for food preparation. If you need to use a different container than what the diluted nicotine came in, make sure it is appropriate for storing nicotine. Bottles made of colored glass or opaque HDPE (#2) plastic should be used. Also, it is a good idea to assemble a DIY mixing kit specifying which syringes, containers, and bottles come in contact with your nicotine. This will help prevent cross contamination.
How many nicotine shots to a bottle of flavored e juice?
Just add one or more 10ml nicotine shots to a bottle of nicotine free, flavored e-juice and you’re good to go. It’s super easy and the result is a bottle of flavored e-juice with whatever nicotine strength you need to satisfy your cravings!
What vapes are recommended for Darkstar?
However, we’ve personally used and recommend DarkStar, Just Vape 247 and Vampire Vape!
How to add a nicotine shot to a shortfill bottle?
Adding a nicotine shot to a shortfill bottle is really simple. Just unscrew the cap of both bottles, carefully pour the contents of your nicotine shot into the shortfill bottle and replace the lid. Make sure you dispose of the empty nicotine shot responsibly and wash your hands thoroughly! All that’s left to do is give your shortfill bottle ...
How many ml of nicotine is in a shot?
A nicotine shot, or ‘nic shot’, is a 10ml bottle of flavorless nicotine suspended in PG, VG or a mixture of both. These 10ml nicotine shots are usually 18mg in strength if you’re buying within the EU, which is the maximum size and strength of nicotine you can purchase since the introduction of the TPD regulations.
How much nicotine can you increase with a shot calculator?
For example, if you want to increase from a 3mg nicotine strength to 6mg, 12mg or more.
Can you use a nicotine shot calculator with freebase?
Yes you can, the nicotine shot calculator works with freebase or nicotine salts, and both are great options. Simply input the strength of your nicotine shot and you’re good to go!
Can you shortfill a bottle of nicotine?
It’s tricky but not impossible! The idea of shortfill bottles is to leave space in the bottle, allowing you to add your nicotine shot (s). Your shortfill bottle is filled with PG, VG and flavor concentrate (s) to roughly 80% capacity. Therefore, you only have enough space for a maximum strength of 6mg nicotine before the bottle becomes full.
What is the most common vape mix?
Nicotine (PG Base) (Most common) This is the most common mix that vapers will purchase. Usually in higher nicotine volumes such as 100mg/ml. Purchasing it in this base, allows you to not only use smaller amounts therefore minimising tainting the flavour of your eliiquid, but it also stores better.
How much nicotine do you need to fill a doubler?
Let’s say you normally vape at 3mg/ml. In order to top up your doubler (15mls in a 30ml bottle), you will need to add 15mls of 6mg/ml flavourless nicotine eliquid.
Where to buy?
If you’re still shopping around for some unflavoured nicotine to add to your mixes, please take a look at the list below. I’ve found most of them to be very good quality, and at a reasonable price.
How is nicotine measured?
Another thing to consider, is that Nicotine is measured by how many milligrams of nicotine are in a millilitre of liquid. Otherwise referred to abbreviated like so (mg/ml). Just to make things even more confusing, the strength can also be expressed as a percentage of nicotine by mass, like so (1.2% nicotine).
How much eliquid is in a bottle of eliquid?
The final bottle will contain 30ml of 3mg/ ml flavoured eliquid.
What is the recommended nicotine level for topping up?
If you are topping up, then you would generally be using a PG base with a high level of nicotine such as 100mg/ml.
Can you mix PG and nicotine?
Typically you’ll purchase a nicotine and PG (Propylene Glycol) mix, but you can also purchase it in other variations, even mixed with VG (Vegetable Glycerin). Now, this is a pretty important thing to know, as before you place an order, you should consider exactly which circumstance you will need to use it.
