Ideal Settings While it completely depends on the system, a lower wattage of 10W can usually get you a decent cool vape, while 50-75W is the ideal wattage for warmer vaping. If you want the best of both worlds, maintain an average wattage of about 40W.
How many Watts Does a vape need?
The advanced vapers tend to love and stick to wattages between 50 and 75 watts and only bumps them up when they’re pulling some crazy tricks on their devices. The majority of mid-range vaporizers are designed for operation at this wattage level.
How to turn on wattage mode on coolfire 4?
You have to press the fire button (the button you press when you inhale) AND the + button at the same time. Then, it'll go into wattage mode. Your Coolfire 4 is fine, it's the instructions that are messed up!
Can I vape while my Cool Fire is charging?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
How much power does a vape coil use?
Voltage is not the only factor that affects wattage – you also need to take into account the resistance of the coils. Lower resistance coils produce more flavour, vapour and heat at a lower voltage than higher ohm coils because they use more watts. For example, if you have a 1.8ohm coil running on 3.7 volts you’ll get an output of around 7.3 watts.
How do you use CoolFire IV?
12:1217:46Cool Fire IV By Innokin - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven pointMorePut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven point four seven ohms close to 0.5. Alright. And it goes up you don't press it.
How do I change my cool fire 4 to Watts?
The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
What is the best tank for cool fire IV?
Compatibility. The CoolFire IV vapes perfectly with the Innokin iSub Apex & iSub-G Sub Ohm tanks.
Why is my cool fire IV not working?
If the switch is set to on and the device is still not responding, plug the CFIV into a quality wall 5V/1A wall charger, as the battery may require a higher level of charge. Q: My CoolFire IV screen shows “Shorted” or “Check Atomizer”. A: Replace the coil in the tank you are using with your CoolFire IV.
How do you change the wattage on a coolfire Ultra?
1:112:25Innokin Coolfire Ultra Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour up or down your hold in either the up or down for a second until it flashes. And then you canMoreYour up or down your hold in either the up or down for a second until it flashes. And then you can scroll and adjust your wattage.
How do I change my innokin settings?
Should you wish to change the setting, hold either the "+ or -" button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required. The display will cycle from 6.0W to 40.0W (in 0.5 steps).
What is CoolFire IV?
Description. The Cool Fire IV Vape Mod with 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on! The compact power, bright OLED display, long lasting battery capacity and easy to use menu system.
How do I change my CoolFire IV TC100?
The CoolFireIV TC100 wattage can be adjusted from 6.0 to 100 watts in . 5 watt increments by pressing and holding the “+” or “-” button. Hold the button down to quickly increase or decrease the set wattage. If the wattage is decreased below 6 Watts it will cycle up to 100 Watts.
Why is my coolfire z50 not working?
Check that the coil is correctly inserted into the atomizer and that the atomizer is correctly attached. Ensure the attached atomizer is tightened to the 510 connector adequately. Check the female 510 connector for debris, e-liquid and condensation as well.
Why does my vape keep turning off?
Weak battery. Your battery may simply just be running out of power. Try switching to a fully charged battery and see if it makes a difference. If you are using a variable wattage device, try turning up the power.
Why does my innokin leak?
Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter the leaking issue if the liquid on the coil hasn't been atomized on time with low wattage. Minimise condensation inside regularly. Besides, please close all the airholes when you do not use it.
How many watts does a cool fire IV vape last?
Whilst many find the Cool Fire IV comfortable to hold due to it’s shape, others find it a bit awkward to hold. Battery won’t last the whole day if you vape at 40 watts. It’s a bit fiddly to change the wattage / voltage – but once you’ve done it once, it remembers your last settings.
How to switch to wattage mode on a Cool Fire IV?
To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
How to tell if my Fire 4 is low on power?
The Cool Fire 4 has multiple battery indicators to let you know when the device is running low on power. The most obvious indicator is the battery icon on the OLED display, but you can also see the voltage remaining by holding down the plus and minus buttons simultaneously.
How long do you have to charge a cool fire?
Before using the Cool Fire you must charge the battery for at least 4 hours (ignoring the charge indicator for the initial charge). In the box you’ll find a Micro USB charger (DC 5V/1A) that you can use to charge your new device from a computer, or using a compatible plug adaptor.
How much is the Innokin Cool Fire 4?
The Innokin Cool Fire IV (available for £39.99) is the newest box mod on ECigaretteDirect, and the latest model in the popular Cool Fire series. In this post you’ll find an overview and tutorial with everything you need to know to use it.
Can you vape while charging a cool fire?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
Does the Cool Fire IV have a cutoff timer?
For your peace of mind, the Cool Fire IV is packed with safety features including low voltage protection, short circuit protection, overheat protection (will display ‘too hot’), over discharge protection and a 15 second cutoff timer, while the built-in heat dissipation holes further prevents the device from overheating.
What does wattage mean in vaping?
First, let’s start by understanding what wattage is. Wattage is simply the measure of the amount of power an electronic cigarette uses. Adjusting your vape wattage means altering the temperature produced by the atomiser/coil as the juice is heated. Adjusting your temperature settings allows you to fine-tune your vape to your desired tastes ...
What is the ideal voltage for a 2 ohm coil?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.
How much wattage do I need to vape?
If you want the best of both worlds, maintain an average wattage of about 40W.
What does wattage mean in vaping?
In simple terms, wattage is the amount of power that you allow your device to use as you vape. The higher the wattage, the stronger the power of your vape device, but higher doesn’t always mean the best for you!
What to do if your vape is burning?
If you are experiencing burnt taste or super hot vapes, it is time you tone that wattage setting down. As a beginner, I recommend that you stick to either average setting or lower settings, and get yourself familiarized with vaping first before you crank up the wattage.
What happens if you increase the wattage of a vaporizer?
Also, remember that when you increase the wattage of your device, your coil works on more power and generates more heated vapor.
When will vaping be available in 2020?
December 9, 2020. June 11, 2020 by John. Every beginner wonders what wattage is best for vaping and there is no clear single answer to that question. The majority of modern vape devices offer a wide range of wattage settings and it could be a daunting task for a beginner to choose the right setting. The wattage you need to choose depends on several ...
What does higher power mean on vapes?
4. Clouds. Just like the temperature of vapes, the thickness of your clouds is also determined by your device wattage settings. Higher power means thicker clouds, and vice-versa. Always remember that higher wattage burdens your coil, so prolonged usage of full-power must be avoided.
How long does e-liquid last?
Whenever you increase your system’s wattage, you should expect a higher consumption of e-liquid. For an average setting, if your e-juice lasts for 2 days , consistently vaping on high power will use it all up in just one day.
What is variable wattage vape?
For selective vapers, variable-wattage vapes are the right way to follow. They allow them to tailor their vaping experience by fine-tuning their devices to their wattage of preference and depending on the kind of vape flavor they are using.
Why is it important to have a good throat hit when vaping?
High wattage generates more heat which in turn makes them feel comfortable them . A great throat hit is the most important thing for vaping. A lot of this comes down to individual preference. Some people draw huge hits, slurp down nicotine and create enormous vapor clouds.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
How many watts does the Innokin Coolfire Z50 have?
The Innokin Coolfire Z50 is an example of a variable wattage device, and delivers 6-50 watts controlled by up and down buttons.
What does wattage mean in vaping?
To put it another way, watts is essentially how much power your vape produces and voltage is how much power is put through the device. So, as you increase the wattage the voltage also increases and vice versa.
How to get the perfect vape experience?
After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.
Why do vapes burn out faster?
You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.
What is the resistance of a sub ohm coil?
The term sub-ohm, while still used, is not as relevant as it used to be. Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping.
How does variable wattage work?
The variable wattage device will then automatically adjust the power going through the atomiser (the voltage) to produce the power output you need (the wattage).
What is the difference between variable voltage and variable wattage?
The difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With a variable voltage device, you manually control the amount of power (voltage) going through your device.