Should I go for a lower wattage vape?
If you can get a more pleasant vape at a lower wattage... go for it. You must log in or register to reply here.
Why is my atomizer low when I vape?
Atomizer low messages sometimes occur when vaping because the mod is broken. This occasionally happens, no matter how careful the user is. These issues are caused by leaking juice, overtightening the atomizers, and by dropping it. The only remedy to these issues is to take good care of the vape.
What happens if you go too low on vape juice?
If you go too low (too high will burn, obviously) you will have less vapor (no big deal) and possibly excess un-vaporized juice on the wick creating mild flooding and gurgling. But it won't hurt anything. Not the tank, not the coil, not the mod.
Why does my Smok tfv8 tank say atomizer low?
Let's say you have an Eleaf 30w iStick mod and you want to use a Smok TFV8 tank with it. The coil included with the Smok tank is a 0.25ohm coil and the Eleaf 30w mod is rated to read a coil resistance no lower than 0.4ohm. The coil is too low in resistance in the mod thus displaying the "atomizer low" message.
What level should my vape be on?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage. They also tend to produce less vapour and at a cooler temperature. With this in mind, it's upon you to find out what works best for your palate.
What does too low ohms mean?
'Ohms too low' or 'ohms too high' error message This SMOK warning refers to the resistance of your coil. Most SMOK users will use coils that are made by SMOK so they should not have this problem. If you have a rebuildable atomizer (RBA), it could be that the coil resistance is too low or too high.
What do I do if my ohms are too low?
2:333:10OHMS TOO LOW Possible Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you're having an issue with ohms too low try to just try to clear up that Kuo. Head run a q-MoreSo if you're having an issue with ohms too low try to just try to clear up that Kuo. Head run a q-tip through the bottom of that and just make sure that the connections are nice.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
Why does my SMOK vape say ohms too low?
SMOK Ohms Too High or Too Low Error messages about ohms are specifically related to the resistance of your coil(s) and indicate that a coil is not compatible with the device. Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem.
What does low resistance mean on a vape?
Low Resistance If the resistance of the coil is lower than what the device can tolerate, the vape will not fire. Dry burning is one way to get around this problem because it can raise the coil's resistance.
What does ohms mean on a vape?
Resistance (Ohm, Ω) Ohms are units of resistance. The lower the resistance of your atomizer, the larger the amount of current flowing through it. If you increase resistance, the atomizer receives less current.
What does ohms too high mean on a vape?
SMOK Ohms Too High or Too Low Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem. If you're working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error.
Why does my Smok vape leak?
Putting too much e-liquid into your tank or pod can cause it to leak. Too much e-liquid can cause the coil to become flooded or for e-liquid to leak past seals when replacing the cap. Many tanks have recommended fill levels to prevent leakage and other problems caused by overfilling.
What is mouth to lung vaping?
With mouth to lung (M2L or MTL) vaping, you inhale the vapour into your mouth first, collect it there, then breathe it fully into your lungs. Smokers will be particularly used to mouth to lung vaping, as it's a similar process to smoking cigarettes.
What wattage should I vape at 0.4 ohm?
between 23-28 wattsThe 0.4ohm coil option performs at its best when used in higher wattage modes between 23-28 watts. The 1.2ohm coil option is best suited for use with either a classic or nicotine salt e-liquid, while the 0.4ohm coil performs best when vaped with a higher VG sub ohm e-juice.
Can you vape at a lower wattage?
Setting your vape to a lower wattage is okay. You can still have a taste of the flavor of the juice, but not like the depth of flavors with a higher wattage. You can achieve a pretty decent vape experience at 10 watts.
What are the problems with vaping atomizers?
The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.
Why is my 510 atomizer low?
The atomizer low warning means the resistance of coils is too low for the mod being used. The atomizer short warning on your mod displays when the coil is causing a short-circuit.
What does it mean when your coil is low?
The coil is too low in resistance in the mod thus displaying the "atomizer low" message. blockquote An atomizer low warning means that the device does not support the atomizer's resistance. This means that your atomizer's resistance is too low and is thus not compatible with your mod.
Why is there no atomizer found?
If the warning is still there after trying to fix it then it could be an issue with the mod being used. A "no atomizer" warning almost always means the coil being used is dead or loosely seated .
What is a RTA atomizer?
It can refer to devices containing coils or it's also used to refer to the coil inside the device. There are three types of atomizer devices: vape tanks , rebuildable drip atomizers (RDA), and rebuildable tank atomizers (RTA). These devices all use a coil that heats up and transforms vape juice into vapor.
Why does my atomizer give me a short message?
There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.
How to fix an atomizer short?
How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.
Why won't my vape fire?
If the resistance of the coil is lower than what the device can tolerate , the vape will not fire. Dry burning is one way to get around this problem because it can raise the coil’s resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires.
Why is my atomizer low?
A common reason why the atomizer low warning occurs during vaping is that the coil was not properly made, the connection is loose, it is not seated correctly, or it does not have an insulator. Another reason a user might get this warning is that he or she misjudged the size of the build.
What does low atomizer mean?
Atomizer Low means that the coil resistance is too low. Vapers who see any of these messages on their mod should stop using the vape immediately. But do not worry. These issues can be solved quickly so that the user can get back to vaping as soon as possible.
MoltoCraft Senior Member Verified Member ECF Veteran
I usually vape at 80W as I get really good flavour and I guess it just works for me.
Drummel Senior Member Verified Member ECF Veteran
I usually go 30 or under on my Aromamizer, Triton, and Atlantis. When I build my Kangertech Subtank mini I usually run around 15w.
wheelie Ultra Member Verified Member ECF Veteran
I think the Isub G is one of the better tanks at low watts. Vape it at 22 watts and get great clouds and flavor. Two months and still on original coil. I just take out cotton, dryburn and install new cotton every couple weeks. Tank can be bought under $30. CHEERS!
dc99 Vaping Master Verified Member ECF Veteran
The billow V2 with duel micro coils is pretty darn impressive at 20-25w. Really good flavor and pretty decent clouds.
wheelie Ultra Member Verified Member ECF Veteran
I usually go 30 or under on my Aromamizer, Triton, and Atlantis. When I build my Kangertech Subtank mini I usually run around 15w.
GeorgeS Ultra Member ECF Veteran
My current favorites are the Lemo2 and TSV4. I currently have ~1.8ohm SS430 builds in both my Lemo2's - I drive them with 15-20W in TC mode. On my TSV4's I have ~0.9ohm SS430 builds installed. These I run anywhere from 15-25W in TC mode.
thetrucker Ultra Member ECF Veteran
The highest I go on any of my batteries is 7.5 watts. I run 1.8 coils in all my toppers. My toppers consist of mini-davide. evod glass, mini trophy and SMOKtech ARO tanks (the aro's are the only ones that aren't glass). I get all the vapor and flavor I need from these set-ups.