Temperature control is one of those factors that makes a big difference in how a vaping experience occurs and delivers. Temperature control (TC) assesses the actual temperature of the coils to give you the best vape experience, including avoiding dry hits and extending battery life.
What is temperature control in a vape?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed.
How do I set the right vape temperature?
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
How does temperature affect vape wire resistance?
When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change. That’s a particular property of Kanthal: its resistance is static regardless of its temperature. For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises.
What is the best material for vaping with temperature control?
The most commonly used materials for vaping with temperature control are: Nickel, Titanium and Stainless Steel. Stainless Steel is considered to be the safest from this lineup and it’s also the only material that can be used in both Variable Wattage and Temperature Control modes.
What temperature should a vaporizer pen be set at?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What does changing temp on vape do?
If you have adjustable vape gear, you'll want to adjust it according to the effects you desire. Typically, a temp higher than 392 degrees allows your body to absorb more cannabinoids. Temps lower than 392 degrees generally offer more of a 'head rush' sort of high.
How do I know what temperature to vape?
Generally speaking, lower temps are more conducive to flavor whereas higher temps will give you the strongest psychoactive effects. The boiling point of THC is around 315° F (157° C), so anything lower will produce minimal psychoactive effects.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What setting should I have my vape on?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What voltage should I set my vape pen at?
between 3.3 volts and 4.8 voltsWhat Is the Best Volt Setting for My Vape Pen? The most common range for a variable voltage vape pen is between 3.3 volts and 4.8 volts.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is the advantage of TC mode?
In TC mode, if the wick runs dry the temperature will start to rise, and therefore the temperature protection will immediately cut power to compensate.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Choosing Coils
Today, there are a wide range of coils available specifically for temperature control devices. For the most part, you will be working with Ni200 or Stainless Steel (SS316L) coils. Hopefully, you checked your device before you brought it home to ensure you have the correct type of coils on hand.
Selecting Your Mode
The next step in your setup process is to select the temperature control mode you will be using. Depending on your device, this can go several different ways. You may need the assistance of your user manual to figure out the menu for the first time.
Base Settings
In order to ensure that your device is functioning properly and that all temperature control operations are accurate, you first need to lock in your resistance at room temperature. Setting a base line temperature without electricity going through the coil will establish all temperature sensing as your coils heat up.
Getting in the Groove
If you are working with a high powered device like the Vex 150 TC Mod, you have plenty of room to work with, so start slow and take your time. At each interval, stop and take a few hits.
For Next Time
Now that you have set up your temperature control device successfully for the first time, you’ve got a good feel for the way it’s done. It may be slow going at first, but you will get familiar with the menu quickly and soon you will have a good idea of what settings give you the best results so you can narrow down your search for the perfect vape.
Why do I have to control the temperature on my vape pen?
You could be trying to flesh out some of the different flavors from your chosen vape juice or concentrate. You could be attempting to try a new substance for vaping altogether. It could even be as simple as trying to get a normal amount ...
What to do if your vape pen is not temperature controlled?
If you have struggled with vaping certain products because of an unpleasant, harsh flavor, then consider lowering the temperature settings. If your pen does not allow for temperature control, consider getting a new vape pen!
What temperature should I vape dry herbs?
The typical vaping range for dry herbs is 325F - 450F, though this can vary depending on exactly what you are looking for.
What is variable voltage?
A variable voltage pen means that the amount of power a pen puts out can be adjusted, and it is that power that raises the temperature. There are a couple of terms used for what is essentially the same feature. You may see volts, watts, or temperature listed as a feature that can be adjusted. These all refer to changing the heat setting of the vape pen you are using.
What temperature is wax vape?
The low end of wax vaping is 325F, but the ...
What is the recommended wattage for a box mod?
If you're using a box mod vape, the suggested wattage is between 1 watt and 60 watts. It really depends on the type of hit you want to get from your box mod.
Can you start high on a vape pen?
Starting high right off the bat can burn whatever you are vaping , and it can even overload cartridges and ruin products. Nothing can ruin a day more than getting ready to vape a pre-filled cartridge only to immediately burn out its circuits.
How to warm up a vape?
Below are a few things to keep in mind: Do not overheat the vape by rushing. Start on the lowest setting and allow the vape the time to warm up and to find the best settings. Start at lower settings and work your way up.
How does a vape pen work?
This is done by sending electricity from the battery to the coils or heating chamber.
What temperature should I vape e juice?
However, generally speaking, it is wise to keep the temperatures hovering somewhere between 390 F and 490 F.
What temperature should I use for a dry herb vape?
On average, somewhere in the 380 to 410 F range is where most people enjoy vaping herbs. This will make sure that there is enough heat to create vapor but not necessarily too much to cause any issues like coughing or wheezing due to harshness. Flavor will vary depending on the strain of dry herb and the particular temperature chosen, however, keeping the vape within this range will avoid burn-outs and bad tastes.
What is a vape pen?
Vape pens come in all different shapes, sizes, and with all sorts of different features. Some are geared specifically towards certain types of dry herbs, oils or other concentrates while others are versatile. In the end, the specific information anyone will need to know for each vape is going to be based on all the different types ...
How to get better vape flavor?
Start at lower settings and work your way up. Remember that lower temperature settings preserve more flavor. However, higher temperature settings produce more vapeors and give a heavier ‘kick’ to the hit. When turning up the heat for bigger rips, make sure to avoid overheating the coils.
Do vapes have temperature controls?
However, there are still general rules that apply when looking at the control of a temperature-controlled vape. For example, each vape pen with temperature control is going to have some sort of dial, buttons, or touch screen to give you the ability to adjust the different temperatures. Keep in mind that different vapes are going to have different ...
Why is temp control important for vaping?
Besides protecting the coil from overheating and getting damaged in the long run, it protects the e-juice consumer from getting exposed to hazardous chemicals generated when the wick burns out.
How does a vape stay consistent?
By controlling the level of temperature that the coils will rise to, the device stays consistent from one puff to another, and even within the puff. In a typical wattage of an ordinary vape, the hits are inconsistent as the temperature of the coil varies depending on the hit prolongation.
Why do vape mods use wire?
Ideally, it involves the application of wire or coil in vape mods to control/restrict/limit power. It’s purposed to prevent dry or burnt hits that normally happen when a vaper prolongs the period of dragging vape juice from the mod. The technology assists in keeping the temperature static instead of letting it burn.
What is a vape atomizer?
A Beginner's Guide to Vaping with Temperature Control. A vape atomizer is a revolutionary device: after their invention, they didn’t only enhance how you consume nicotine but they have been subject to consistent improvement. Their constant innovations have kept vapes from becoming saturated entities, like their immediate rival, cigarettes.
What are the benefits of vaping?
Some noticeable benefits that come with this modern vaping technology include: 1. Dry Hits are Eliminated .
Why is it important to use authentic batteries for vaping?
The use of reliable and authentic batteries for vapes is highly recommended as it dictates the quality of TC achieved by the vape. That’s its main importance for including it in vaping accessories. In this article, the technology of temperature control in vaping, its significance, and what it is involved in, are discussed.
What is TC vape?
TC is said to be a potential remedy for minimizing the mishaps associated with va pes as a way of creating surefire to reduce the resistive temperatures (temperature generated by resistors) ultimately reducing dry burns and horrible sensations felt by vapers.
What is temperature control?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed.
How does temperature control work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature.
What do I need to start using Temp Control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
How to vape in temperature control mode?
Most TC enables box mods have predefined profiles for Nickel (Ni), Titanium (Ti) and Stainless Steel (SS). Knowing the material your coil is built from will help you select the correct profile. Note that it is extremely important to use the appropriate setting for the best results.
Setting the right vaping temperature
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
