Common vaping temperatures are in the range 392°F to 480°F (200°C to 250°C ), with the temperature usually adjusted quickly in increments of 10°F (5°C). If you choose the wrong temperature this could damage your coil!
What is the best wire for vape coils?
Available in a range of resistances, Kanthal wire provides versatility, working well for both sub ohm vaping and mouth to lung vaping. Kanthal can only be used in Variable Wattage mode, making it compatible with most vape devices thanks to its versatility. Stainless Steel coil wire, often shortened to ‘SS’, is a versatile material for vape coils.
How do vape coils work?
It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs the e-liquid held in your vape tank.
How to install a vape coil?
Installing a coil into your vape device involves three simple steps: Inspect the coil’s condition. If your coil and tank has O-rings, check that they aren’t damaged. Fit the coil into the base of the tank and tighten by hand with a suitable amount of force that will allow you to unscrew it.
What should I do if my vape is too hot?
If the vapour is too hot, instead of faulting the tank or the vape, you should check the wattage and airflow combination. High wattage gets the coil to be very hot, which in turn produces hot vapour. When you open the airflow, cool air from outside mixes with the vapour to cool it.
How hot do vape coils get?
For single point thermocouple measurements with PG, coil temperatures ranged from 322 ‒ 1008°C, 145 ‒ 334°C, and 110 ‒ 185°C under dry, wet-through-wick, and full-wet conditions, respectively, for the total of 13 replaceable coil heads.
Which wire is best for vape coils?
Stainless Steel It's unique among vape wires because it's the only wire that can be used with both wattage and temperature control mode. Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping.
What gauge wire is best for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
How do I choose a coil wire?
Typically coil wire is somewhere between 22 and 32 gauge. Resistance, measured in Ohms is equally important. As the size of your wire goes up, the wire's resistance decreases. Therefore, a thinner wire with a 30 gauge will have more resistance but will also heat up quicker than a 22 gauge wire.
What is the best wire for flavor?
Best Vape Wires Reviewed: Keeping Flavor, Build and Clouds in MindProduct NameBest ForTEMCo 28g Kanthal A1 WireGood flavorMaster of Clouds 22g Kanthal A1 WireGood flavorMaster of Clouds 26g Stainless Steel WireExcellent flavorPure Atomist 28g Stainless Steel WireExcellent flavor1 more row•Dec 6, 2016
What coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What wattage should I be vaping at?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
What is the safest coil for vaping?
in stainless steel. Chromium (Cr) undergoes passivation by oxygen present in the air. During this process a very thin layer of chromium(III) oxide is formed. It is widely known that chromium(III) compounds are recognised as safe.
Can you vape stainless steel in wattage mode?
Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Which is better kanthal or stainless steel?
Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn't introduce any off flavors that require getting used to.
What is Tiger wire vape?
The tiger coil is simply just a twisted coil containing a single round strand and a single flat ribbon strand. Twisting two differently shaped wires gives it more pockets and grooves than a standard twisted coil. This creates more heat and denser vapor, giving it an improvement in flavor over single-strand builds.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
What is the difference between a 32 gauge coil and a 24 gauge coil?
When comparing coils with the same ID, number of wraps, and material used, a coil made with 32 gauge wire will be of much higher resistance than a 24 gauge coil. Another factor to take into account when it comes to wire resistance is the internal resistance of the coil material.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is Kanthal wire?
Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc. It is easy to work with, yet stiff enough to hold its shape when formed into coils—which comes into play during the wicking process. It is extremely popular as a primary wire when building single-wire coils.
Why do you need a TC wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
What wire should I use for vaping?
It can be used in temperature and wattage control mode. Stainless steel also doesn’t have to include nickel, which is an allergy hazard for some. Some people use SS wire for dry vaping, which is not an ideal idea.
What is a vape coil?
Vape coils are essential parts of a vape pen, and the wire that goes into their construction can significantly impact the flavor, taste, and aroma of your vape juice. That is why getting the ideal wire coil for your vape is such a crucial endeavor.
What is Kanthal wire?
Kanthal is one of the most popular wire materials in vape coils. It’s effortless to mold into a coil, does not oxidize quickly, and holds its shape. It’s affordable and readily available. Kanthal is also durable, meaning you can use it for a long time.
What is the gauge of a vape?
A gauge is a unit of measurement for the diameter (overall thickness) of the wire itself. The smaller the gauge, the thicker the wire.
What are vape wires made of?
Vape wires come in many sizes, forms, and materials. They’re always made out of metal, and the most common metals used are kanthal, stainless steel, nickel, and titanium. Kanthal and stainless steel are the most popular options, with stainless steel being used in most vape coils.
What is a vape?
A vape is a relatively complex device. You’re well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into an aerosol, which is then inhaled for the pleasure of the user.
Is nickel wire good for vaping?
Pure nickel is an excellent vape coil wire due to its quick heat up. While some people are allergic to it, it has some very useful properties. It heats up quickly, is affordable, and provides a slightly augmented flavor compared to the previous two.
How to build a vape coil?
Some folks love clouds, especially when vaping e-juices (not so much for concentrates and dry herbs). If you’re one of them, keep in mind the following with regards to your coil: 1 Ramp up airflow – Unlike when building for flavor building a coil to produce big clouds means allowing plenty of airflow. Don’t stuff too much cotton in or you’ll choke off the cloud. 2 Wire gauge – The thicker the gauge of the coil the more surface area and the bigger the clouds. 3 Diameter – You’ll need at least a 3 mm inner diameter on your coil to produce storm clouds.
What kind of steel should I use for coils?
When building coils for flavor, you’re probably going to want to use nickel or 316L stainless steel . But there are other things to keep in mind as well such as:
What is the fastest induction vaporizer?
If you’re looking for an intense and robust dry herb or concentrate vaporizer without the need to mess with having to make or change coils on a regular basis, check out the Loto Legend , the easiest and fastest induction vaporizer.
How big of a coil do you need to make storm clouds?
Wire gauge – The thicker the gauge of the coil the more surface area and the bigger the clouds. Diameter – You’ll need at least a 3 mm inner diameter on your coil to produce storm clouds.
What is a coil used for?
Keep in mind that coils are generally used for e-juices and liquid concentrate ...
What is Kanthal wire?
Kanthal – Kanthal wire is known for being easy to work with. It also tends to hold its shape well, is durable and resists oxidation. In addition, it’s also cheap and plentiful, so it won’t break the wallet. For all these reasons and more you’ll often find Kanthal wire in single coil builds. On the flipside, it doesn’t ramp up as fast as some other wires, and you can’t use it in concert with temperature controls to mediate the flavor and vapor from various materials you use like concentrates, dry herb, flowers, e-juices or waxes.
What Is In A Name? For Coils, Everything
Wire is very important when it comes to vaping, and as Shakespeare put it, ‘The name of a thing does not matter as much as the quality of the thing.’ Wires are what your coil is made of and the difference in wires makes a big difference in the output of the vapor the coil produces.
When Should You Change Out Your Coil?
As mentioned at the start of this vape coil guide, your coils have the shortest lifespan in your device, not counting the e-liquid since that is technically outside of your device and just added. You’ll know when to change with your eyes, ears, and taste when something is a little off from your typical vaping experience.
The Best Vape Coil Wire Bang For Your Buck At VaporDNA
We have a wide range of coils, as well as other vaping device accessories to make your vaping experience the best it can possibly be. If you are interested in a new device we have a great selection of those as well and all of the popular e-liquids that you have been hearing about and wanting to try.
Why is my vape so hot?
When you vape, the coils get hot. Usually, the temperatures get up to 3000 C or even higher. Manufacturers design these parts with insulation so you might not feel the heat at such high levels through the casing. But if you are having a problem with a hot vape, the coil is probably the main cause – especially is you are into chain vaping.
Why is my coil hot?
High wattage gets the coil to be very hot, which in turn produces hot vapour. When you open the airflow, cool air from outside mixes with the vapour to cool it. If the airflow is restricted, the vapour will be too hot. Solution. Adjust the airflow to let in more cool air to cool the vapour.
What happens if your wattage is too high?
High wattage/type of coil. If your wattage is too high, or you are using a complex coil tiger coil or a Clapton coil, you might have heat problems. These accessories are to be managed carefully. Though they have thermodynamics to cool them down, you can also try reducing the wattage.
Do Clapton coils burn hotter than standard coils?
For instance, Clapton coils tend to burn hotter than standard coils. The more complex a coil is, the more heat it will generate. And though this might be perfect for heavy smokers looking to blow large volumes of vapour, you need to be careful with their heat potentials. Solution.
Can you clean a coil?
But if you don’t want to, you can try cleaning the coil. Remove the gunk surrounding the coil, and you will be good. Of course, this will not be as successful as a new coil since there is only so much cleaning a coil can achieve. Also, it takes a while before the coil dries and you can use it again.
Does a vape feel hot?
Eventually, the heat is bound to make it to the exterior. The heat will be concentrated at the base, and the body of the vape will feel warm as well. Also, the type of coil you are using can contribute to the problem. For instance, Clapton coils tend to burn hotter than standard coils.
What is vape gear?
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
What temperature does a BIC burn?
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad! A normal flame can do so much damage because most cannabinoids begin to boil at half (or even a third) of that 600 ℉.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
How to prime a new coil?
To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do you need to worry about Ohm's law?
If you vape a regulated e-cig, for example an arc 5 or Optimus, you do not need to worry about Ohm’s law as the device sorts this for you. If you use an unregulated e-cig, such as a mechanical mod then you need to be aware of Ohm’s law and battery safety.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
