What size coil do I need for my first vape?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be. We recommend using some basic 26-gauge Kanthal for your first few vape coil builds.
How to wrap vape coils?
For more info, watch Rip Trippers tutorial on how to build a parallel coil by hand. For even better results you can use a coil jig: just wrap the first coil using the jig’s guide, and manually wrap the second coil in between the gaps. Wrapping vape coils can appear to be much more difficult than it really is.
How long should you Soak Your vape coil?
How Long Should You Let Your Vape Coil Soak? Vapers often disagree on the amount of time one should leave the coil to soak. While some leave it for a few minutes around 10 to 15, others argue that the taste is improved when you leave it to sit for a couple of hours or even overnight.
How much vapor should I expect from a 5W coil?
If you’re heating the coil at 5W then you probably won’t produce much vapor. If your coil is 1.6ohms though I’d expect a fair amount of vapor anywhere above 15W.
Should vape coils be spaced?
Spit back is normal in vaping. Compared to contact coils, spaced coil will occur spitback more. Because spaced coils have larger spacing, it will splash out when heating. On the other side, the contact coils can block the spitback.
Should the airflow be open on a vape?
Vaping & Air Flow: The Basics If your airflow is open (or 'wide'), then you'll get a large cloud of cool vapour. An open airflow allows lots of fresh air to dilute your e-juice cloud, so flavours tend to be harder to pick up.
Does airflow affect coil life?
With a higher airflow, the clouds will be cooler to feel, but by cooling it down, you lose a bit of flavor. Instead of forcing the flavor out with the vapor, it can stay on the coils. Higher airflow can decrease the amount of juice needed, because it remains on the coils.
Does more airflow mean bigger clouds?
Increasing airflow (to an extent) means more fresh air to cool vapor temperature; this not only gives you added cooling capacity making it more comfortable to inhale, but it also increases the size of your cloud.
How do I make my vape smoke thicker?
Get the Right PG:VG Ratio As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG.
Should I close airflow when filling tank?
Your tank has a center tube, make sure keep the e-juice out of it and in the fill holes or you'll end up with a gurgling, popping, spitting mess. This is the airflow channel. You do not want to get any e-liquid in there. To get started, close the airflow holes on your tank completely.
Does higher wattage give more flavor?
A NOTE ON AIRFLOW: Less airflow with a higher wattage will give you a warmer vape with more powerful flavour.
Does poking holes in coils make them last longer?
Use a sweing needle, or somthing just as small, and poke 1 – 2 holes in each cotton gap surrounding your coil. This has been known to double the life of coils. Just make sure however the juice your using isn't too thin. If the juice is thick and oily, poking holes in the cotton should work very well.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Why is my vape not giving a lot of smoke?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How do I make my vape dense clouds?
Small changes to the way you inhale and exhale while using a vaping device can affect the clouds produced. Try leaning forward slightly and straightening back up as you inhale. Straightening up while inhaling naturally opens up the lungs and allows more vapour to enter them.
What is the best vape for a heavy smoker?
The Best Vape Kits For Heavy Smokers Kit List Are:Innokin – T22 E Kit.Voopoo – Argus Pod Kit.Aspire – Zelos 2.0 Kit.Geekvape – Aegis Boost Pro Pod Kit 100W.Voopoo – DRAG 3 Kit.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
How to prime a new coil?
To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal.
How to prim a vape?
Method 1: Drip the e-liquid directly on the wick through the air holes before you install it in the tank. After that, deeply inhale a number of times through the mouthpiece to help pull the vape juice through the cotton.
What does priming a vape coil mean?
Priming your coil means pre-saturating the wick material with your vape juice before using it so as to prevent it from either burning or overheating. Now, how long you should let your coil soak? This article answers that question, but first, you need to learn the proper way of priming vape coils.
How to get a vape out of a hole?
Step 1: To each hole, add a few drops of the vape juice (two to three drops will do) and only stop when the juice starts to pool on the top part of the hole. The idea is to get the wick wet and not flooded. Step 2: If you notice any pooling, shake out the excess juice when you still can onto a piece of paper towel.
Why do primed coils last longer?
Compared to coils that have not been primed, the primed ones last longer because the priming process lets the materials within the coil to be broken into accordingly. While the priming process might be easy, its benefit cannot be undermined because it will let you enjoy the vaping experience while you significantly increase your coil’s life.
Does primeing a coil affect flavor?
Enhances Flavor. Failure to prime your new coil will result in a burnt taste. However, when you properly prime your coil, there will be an added intensity to the taste of the vape juice you are using. The saturation of both the cotton and the coil results in a burst of flavor that’s very rich from the first hit you choose to take.
Can you fill a vape tank with juice?
After that, you can fill the tank with your preferred vape juice. While you fill your tank, make sure you avoid the tube at the center. That is because it leads straight to the coil. Ensure you fill your tank only to the manufacturer’s recommended level to avoid leaking.
Can you soak a vape coil?
Always remember to let it soak for enough time before you get to vaping as rushing could result in issues with your vape coil or device. Most of all, don’t use too much liquid when you’re soaking it. The goal is not to flood it. You just need it wet as opposed to dry.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is macro coil?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
What is a parallel coil?
In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
How long do vape coils last?
How you vape and how well you treat your coils can significantly extend their lifespan. Generally, new coils last between one to two weeks, but that can be extended if you properly break-in new coils when you get them and practice good care and maintenance procedures during and between usages.
How to attach coils to a vaporizer?
Attach coils to vaporizer: Put your coils in place and press your firing button until they heat up completely. Just like building your coils for the first time, make sure that they heat evenly across all of the wraps. Look for signs that there is anything heating unevenly and make sure it is clean and dry.
Why does my vape get burnt?
Instead, because there’s no juice to heat, the coils heat the wicking material which will cause the material to be used up faster and produce a less than desirable vaping experience. You can avoid this by:
Why do coils need to cool down?
Your coil needs to cool down and absorb more e-liquid before it is ready to produce more vapor. If you are firing too quickly, you could be leaving your coils dry between hits without even realizing it. Don’t run your tank empty. Letting your tank drain all the way to the bottom before you refill is asking for trouble.
How to clean coils?
Rinse the coil under hot running water: Hot water will wash away any leftover debris or liquid that was sticking to the sides. Shake out the water: Gently shake out any water that is sitting between the coil wraps and then let your coils air dry on top of a paper towel or other absorbent material.
How many dry hits does a vape tank take?
Once your device has been appropriately filled, reassemble the tank and attach it to your battery. Take four to five dry hits, which is to say take a drag without activating your battery’s fire button. This allows the vape juice from the tank to siphon into the cotton of the wick.
What is priming coils?
Priming your coils is like the break-in period for a new car. It lets the coils settle into their normal operating conditions before you add e-liquid. Avoid over-pressing the firing button. Use the puff timer tools on your vaporizer to learn when to hold and release the firing button.
What IS a coil exactly? How does it work?
The function of a coil is relatively simple: heating up the e-liquid held within the cotton* wick to the correct vaporizing temperature. There are typically small holes, or ”wells” in the side of the coil housing. Behind those lays the cotton itself, which holds the liquid against the literal coiled wire in the center.
Priming My Coil: Step by Step Guide to Perfection
Isolate or expose the coil. Take apart your tank (lefty loosey, righty tighty) until your coil is fully exposed.