To fill your clearomiser with blu Liquid, complete the following steps:
- Unscrew the mouthpiece.
- Open the blu Liquid bottle by pushing down on the cap and turning it to the left.
- Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill.
- Carefully replace the lid on the blu Liquid and screw the mouthpiece back onto the clearomiser.
- Screw the clearomiser onto the battery.
- Before using, allow a few moments for the liquid to settle.
How to use a vape pen?
Simply press the button and inhale while keeping the button depressed. Some vape pens, especially those for use with cannabis oils, may not have the button, so all you need to do is inhale (known as “auto draw”). Small sips are generally the way to go, so avoid inhaling as hard and as deep as you can.
How do I use the Blu liquid clearomiser?
Open the blu Liquid bottle by pushing down on the cap and turning it to the left. Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill. Carefully replace the lid on the blu Liquid and screw the mouthpiece back onto the clearomiser.
How to turn on a 510 thread vape pen?
These cartridges can be screwed on to most 510 thread vape pens. Next, if your vape uses a button functionality, you might need to turn it on by clicking the button a series of times (usually 3-5). If it is an autodraw battery, then this isn’t a concern.
Can I use any e-liquid on my Blu device?
Some vaping pens allow you to use any e-liquid on the market, but are also not the highest quality and often don't stand the test of time because low quality e-liquids can damage the device. blu devices come with a range of different flavours for whichever e-cigarette you choose.
How to charge myblu?
Every myblu is shipped with a partial charge but we recommend charging it fully before you start using it. To charge myblu, follow these steps: 1 Plug the USB charging cable into a USB-compatible device and then plug the cable into the port at the base of the device. 2 The tip of the device will glow blue to show that it has started to charge. 3 Leave the device to charge for about 20 minutes.
How to refill myblu?
myblu is refilled using liquid pods which click onto the device. When each is finished, simply remove by lightly pressing on the sides of the liquid pod. After disposing of the old pod you can immediately attach a new one to the myblu.
How long does a Myblu battery last?
The myblu battery will last for approximately 4 hours between charges depending on how much you use it. As with the battery running low, you will also get less vapour and a weaker flavour when your liquid pod is empty. Each liquid pod has a clear chamber which allows you to check if you have run out of vape juice.
How to fill a clearomiser with blue liquid?
To fill your clearomiser with blu Liquid, complete the following steps: Unscrew the mouthpiece. Open the blu Liquid bottle by pushing down on the cap and turning it to the left. Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill.
What happens when a Blue Pro battery runs out of charge?
When your blu PRO Battery starts to run out of charge, you will start to notice a few changes in the way your blu PRO is performing. This may include less vapour production and a less intense flavour.
Why does my USB charger light turn blue?
The light on the USB Charger will glow red and the tip of the device will flash to indicate that it has started to charge. Once the device is fully charged, the light on the USB Charger will turn blue. If the light does not glow when the USB Charger is plugged in, the device has not been screwed in correctly.
Does the Blue Pro have coil resistance?
The blu PRO has an optimised coil resistance which creates a smoother taste to give you a unique vaping experience. Your blu PRO is shipped to you with a partial charge but we recommend that your device is fully charged before your first use. To get started, all you’ll need is your fully charged blu PRO and your favourite blu Liquid.
What Comes Next?
While vaping with blu is simple, there’s no doubt that there’s more to learn to help improve your vaping experience.
Refilling Your E-Liquid
When refilling your e-liquid, things can get messy so make sure you’re doing it over a suitable surface rather than over a carpet or laptop. It’s also a good idea to lay down a few paper towels to mop up any stray e-liquid.
Fixing Your Flavour
Sometimes when you’re vaping, you might get a weaker flavour coinciding with less vapour than would normally be produced. The most likely issue is that your e-cig is running low on e-liquid or charge, and you can take the appropriate steps to fix this when you notice it happening.
Charging Your Battery
It’s a good idea to get into a routine of charging your e-cig during a certain period of the day. While it’s easier to leave it to charge at night while you’re asleep, this can damage the battery. Try getting into the habit of putting it on to charge whenever you start cooking or reading a book.
What is the part of a vape pen that draws vapor?
Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.
How does a vape pen work?
Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.
How many clicks to turn on a vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.
What is the main part of a vape pen?
Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.
What is a single use vape pen?
These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.
What is an auto draw on a vape pen?
Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.
What are the benefits of using a vape pen?
There is no combustion, flame, or ash involved in vaporizing. This is both cleaner and better for health. Less odor. Because smoke is removed from the process, less odor is produced, and it dissipates more quickly than smoke. More discreet.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
What is a dab atomizer?
Dab - The mode meant for vaping cannabis extracts with a 510-thread wax atomizer, and is indicated with blue lights. It can also be used with THC cartridges that can take this voltage setting. But do not use this setting with any vape cartridge unless you're certain it's capable of vaping at this voltage.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
