Press and hold the fire button to vape. When the device is turned on, pressing the fire button will engage the battery and vaporize the juice inside the device. As you press the fire button, suck on the mouthpiece to pull the vapor into your mouth.
Full Answer
How do I turn the itaste VV on and off?
The iTaste VV 3.0 has three buttons, the +, –, and the power/fire button on top. To turn the device on, press the fire button three times in a row. When the device turns on, the light around the fire button will flash three times.
How do I charge the itaste VV battery?
The iTaste VV 3.0 has a micro USB port in the bottom, and this is where you charge the battery. Insert the micro USB into the bottom of the device, and then plug the other end of the USB into a computer or charger adaptor. The power/fire light will be green when it’s fully charge, yellow when it’s half charged, and red when it’s almost dead.
How to use a vape machine?
Place your mouth around the mouthpiece. Put your lips over the tip of the mouthpiece and seal your lips around it. You don’t have to purse your lips tightly together, but you do have to pinch them together firmly enough to create a seal around the mouthpiece. Press and hold the fire button to vape.
How do you use a personal vaporizer?
Personal vaporizers are used as an alternative to cigarettes and electronic cigarettes. The iTaste VV 3.0 is controlled by a microprocessor, and has variable voltage and wattage settings so you can customize your vape with a few button clicks. Turn the vaporizer on. The iTaste VV 3.0 has three buttons, the +, –, and the power/fire button on top.
How do you put juice in a vape pen?
0:161:35How to fill a vape pen with E juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipScrew off the bottom nipple or straw piece base. You're gonna use your dabber your a juice tavernMoreScrew off the bottom nipple or straw piece base. You're gonna use your dabber your a juice tavern you're gonna fill up the atomizer to this side or on to the side of the atomizer itself.
What is a iTaste VV?
The Innokin iTaste VV 4.0 Battery is a variable voltage and variable wattage device, allowing for a customized vape that will suit your specific needs.
How does the iTaste MVP work?
11:5217:04Innokin iTaste MVP V2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just press one button to go up up up up up up cycle back down up up cycle. Back down that's up.MoreYou just press one button to go up up up up up up cycle back down up up cycle. Back down that's up. Same thing for the wattage. If you press and hold the top button.
How do I charge my iTaste MVP?
0:043:27Innokin iTaste MVP: Starter Kit instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a 3 click turn on 3 click turn off it's got those three colors the green means that the batteryMoreIt's a 3 click turn on 3 click turn off it's got those three colors the green means that the battery is fully charged yellow means it's halfway and the red means it's about to die.
How do you use iTaste?
0:092:40iTaste vv4 walk through - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you fire the device. It will tell you what voltage it's running at so to switch it betweenMoreWhen you fire the device. It will tell you what voltage it's running at so to switch it between wattage. And voltage you'll need to hold the power button and the minus button.
How do you use the iTaste vaporizer?
Turn the vaporizer on. The iTaste VV 3.0 has three buttons, the +, –, and the power/fire button on top. To turn the device on, press the fire button three times in a row. When the device turns on, the light around the fire button will flash three times.
How many mAh does the iTaste VV have?
Superior Battery Life: The iTaste VV is available as a 750mAh and 1000 mAh polymer Li-Ion rechargeable battery.
How to turn off battery on atomizer?
ON/OFF Battery Switch: Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
What is the voltage of Innokin iTaste 4.0?
The voltage output of the iTaste VV 4.0 can be adjusted from between 3V – 6V in 0.1V increments, while the wattage can be adjusted from between 6W to 15W in 0.5-watt increments. This ability does not only enhance your vaping pleasure, but also allows you to use this magnificent battery with a wide range of atomizer coil resistances.
How many watts is a variable?
Variable Wattage: Wattage can be adjusted from 6.0 – 15.0 W in .5 watts increments.
How long is Vapor Authority warranty?
Don’t worry – you’re covered! You can always purchase with peace of mind from Vapor Authority. We offer you a full 60-day in-house warranty on all manufacturer defects, and a 15-day period for returns and exchanges on unopened items as well. Full details on our Warranty page
What is SSL in vapor?
Rest assured that when purchasing from Vapor Authority, all of your information is transmitted using Secure Sockets Layer (SSL), which encrypts your data.
Does iTaste VV turn off when battery is discharged?
Over-Discharge Protection: The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.
TheSoberSista New Member
I have been smoking for years and finally got an e-cig a week ago. It is an ITaste vv that I ordered from Amazon, the Express Kit. And I went to my local smoke shop and they picked out a cart (still not up on the terms) and filled it for me with tobacco -flavored juice at 16 mg nicotine.
r77r7r ECF Guru ECF Veteran
Welcome, Plug it in at anytime for vaping or charging. All lights Out when completely charged.
Baditude ECF Guru ECF Veteran
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the batterys capacity via the color of the LED Button.
STiZzle2010 Super Member ECF Veteran
I charge my V3 every night before bed as I have read these batteries like to be topped off. Yours is amber now as a warning that the battery is getting low. When it is charging the light will illuminate green until it is fully charged which at that point the light turns off.
TheSoberSista New Member
Welcome, Plug it in at anytime for vaping or charging. All lights Out when completely charged.
STiZzle2010 Super Member ECF Veteran
Trust me you are not a bother by posting this thread. Ask as many questions you need as we are all here to help!
TheSoberSista New Member
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button.
Smithsonian
I just received my iTaste VV v3.0 express kit and my Kangertech EVOD clearomizer in the mail today. I filled the EVOD, attached it to my iTaste battery, but it won't vape. When the clearomizer is not attached to the battery, the battery works normally.
Smithsonian
The battery reads 1.9, the coil is listed at 1.8. I tried switching out a replacement coil. Same thing. Just a solid green for 5-6 seconds when I hit the fire button. It was reading 2.0 earlier so the readings are not consistent.
Smithsonian
Well, my mod works now. I honestly have no idea why it wasn't cooperating yesterday, but today I said what the hell and tried it again, and now it's vaping great. Thanks for all the help.
Bebop
Thanks for all the help. This site is awesome and I'll write some reviews on this mod, and in the future I've decided I'm better off coming here for customer support than the actual manufacturer or vendor lol. Go figure.
Smithsonian
I lied... the same problem keeps arising. Let me refresh and give you some more info to see what you think. So when my clearomizer is not attached to the battery, the battery works fine and appears to be functioning properly. I've charged it fully, so the batt life isn't the problem.
Bebop
1) you are cranking up the voltage too high for that coil (1.8) on that coil I would expect you to taste burnt at 3.6 or higher.
Smithsonian
I have 50VG/50PG juice from ecblends.com. I had my voltage and wattage down all the way (3.3, 6.0) when I was vaping at first and I didn't crank it up too high while I was increasing. I quickly dry burned it a few times, with the V/W all the way down, only firing it for 2-3 secs a few times.
