While your PAX vaporizer is charging, it will indicate the battery level with pulsing white lights. Once fully charged, all four lights will glow white, and stop pulsing. You can also check the remaining battery level while the PAX is on, by giving it a shake.
How do I know if my Pax 3 is ready to vape?
The lights will turn on and pulse purple while it heats up. The PAX 3 takes about 30 seconds to reach temperature level 3, while the PAX 2 can take almost twice as long. Once it does the lights will turn green and you're ready to vape.
How do I know if my Pax is charged?
Note: Pax Labs recommends never charging the Pax in temperatures below 41°F (5°C) and above 113°F (45°C). In other words, don’t attempt to charge the device in extreme cold or heat. How Do You Know It’s Charged? To determine whether or not the battery is fully charged, simply look to the flower-shaped LEDs on the front of the device.
Does my Pax produce a lot of vapor?
My Pax doesn’t produce much vapor; I am working with the Ploom support staff, they said the material was too dry…the opposite of what you recommend. They said to wrap the bud in a damp towel, refrigerate for 24 hours.
How do I charge my Pax vape pen?
Many vape pen models screw into a USB adapter, which can be connected directly to a USB power source. Others utilize micro USB charging ports. All PAX devices arrive with the charging cables in the box. PAX 2 and PAX 3 recharge via USB; the device lays atop a cradle with a magnetic dock. PAX Era comes with a micro USB to USB cable.
How long does it take for a PAX to charge?
PAX is fully charged in two hours. When placed on the charging platform, the PAX LED will shine orange. At 80% battery charge (around 90 min) the LED will shine a steady green. Most PAXers report an average of five oven-loads before needing to recharge their PAX battery.
What makes a PAX sound?
There are two components in PAX that will make a bit of noise. The mouthpiece has a small, sliding ring on the metal stem. This piece needs to freely shake back and forth for the mouthpiece to open and close properly - keep this clean to prevent your mouthpiece from getting jammed with build-up.
Why is my PAX LED blinking green?
If your PAX LED is blinking green when placed on the charging dock, it may be an indication that some moisture is trapped in the internal components of your PAX. Sometimes a bit too much isopropyl alcohol or mouthpiece lubricant used during cleaning can cause this, so we always advise that a little goes a long way!
What to do if PAX doesn't turn on?
If PAX appears doesn’t turn on immediately, place your device on the charger for a couple minutes and try again.
How to get moisture out of a PAX?
Try this common trick for electronic devices when exposed to moisture: put your PAX in a sealed container of dry white rice for at least 24 hours to absorb any moisture trapped inside PAX. Leave the oven lid and mouthpiece on the device. The rice serves as a natural desiccant and should draw the moisture out.
What temperature should a portable battery be charged at?
Please Note: Portable electronics containing Lithium Ion batteries present rare, but potentially serious safety hazards, especially under hot or cold conditions.Charging of the PAX should only be performed at temperatures between 41°F and 113°F (5°C and 45°C).To assure personal and property safety, never charge your PAX device below 41°F (5°C) or above 113°F (45°C).
How does a mouthpiece work?
This piece needs to freely shake back and forth for the mouthpiece to open and close properly - keep this clean to prevent your mouthpiece from getting jammed with build-up.
What does it mean when your PAX is charging?
While your PAX is charging, it will indicate the battery level with pulsing white lights. Once fully charged, all four lights with glow white, and stop pulsing.
How long does it take for a PAX 3 to reach temperature?
The PAX 3 takes about 30 seconds to reach temperature level 3, while the PAX 2 can take almost twice as long. Once it does the lights will turn green and you're ready to vape.
How to exit temperature mode on vape?
Once it goes past the highest temperature, it will circle back around to the lowest. To exit temperature mode, either press and hold the button, or simply shake the vape.
What color is the temperature setting on a PAX 3?
We've also included the actual temperatures that each of the settings correspond to. (Note: Temperature Setting 1 lights yellow for the PAX 2 and Green for the PAX 3 .)
How many lights does a vaporizer use?
PAX vaporizers use four lights, aka petals, for all their communication. Our PAX 2 and PAX 3 Light Guide will tell you everything you need to know about what's going on with your vaporizer. For a complete rundown of each vape, read our PAX 2 review and PAX 3 review posts.
Who dropped the Mighty+ vaporizer?
Storz & Bickel just dropped the Mighty+ dry herb vaporizer - easily the most anticipated vaporizer release of all time!
How to tell if a Pax battery is fully charged?
To determine whether or not the battery is fully charged, simply look to the flower-shaped LEDs on the front of the device. These LEDs are essentially the display system for the Pax vaporizer. When one of the “petals” is lit up white, the battery is 25% charged. When two petals are lit, the battery is 50% charged. And when three petals are lit, it’s 75% charged. When all four petals are lit up, the battery is fully charged.
How long does it take to charge a Pax 3?
It takes approximately 2.5 hours, according to the manufacturer, to fully recharge the Pax 3’s battery using USB. For faster charging, the AC Adapter is where it’s at, fully recharging the battery in just 90 minutes.
How cold should a Pax be?
Note: Pax Labs recommends never charging the Pax in temperatures below 41°F (5°C) and above 113°F (45°C). In other words, don’t attempt to charge the device in extreme cold or heat.
Why does my iPhone blink red?
When the battery is completely depleted (out of juice), the top left petal will blink red three times to let you know it’s time to recharge the device.
How to check battery life on PAX?
When you are using your PAX Era, you can check the battery level at any time by gently shaking the device. The LED indicator will display the current battery level, with each petal representing 25% battery life.
How to change temperature on a PAX era?
Each setting can alter a pod’s flavor and your vape experience. To change your temperature setting, enter Temp Set mode by shaking the device. The LED indicator should then show the current battery level. When the battery life is displayed, remove the pod from your device. When the pod is removed, the indicator should show the current temperature setting and then begin cycling through each of the four available settings. When the setting you’d like to select appears, reinsert the pod. The LED indicator will pulse to confirm your selection.
What is a pax era?
What’s a PAX Era? The PAX Era is a sleek and compact pod vape designed for use with concentrates like cannabis oil. This pod vape employs pre-filled inserts that are easily swapped in and out as needed. Pod vapes are great options for discreet, low maintenance usage.
How to insert a pod into a PAX era?
Inserting a pod into the PAX Era is as easy as clicking it in until contact is made with the battery. You will know that your pod has been successfully inserted because the LED indicator will pulse white, meaning the device is now ready for use.
How does the PAX Era work?
The PAX Era might require a charge when you first unbox it. It charges by way of a micro USB; the charging cable is included with the device. As the device charges, the LED indicator will display the current battery level. Unplug the device once fully charged.
What is a PAX mobile?
The PAX Mobile application is the key to unlocking a wide range of additional features. It is a must-use to fully experience your device’s ...
How to swap out a pod?
When a pod is depleted, swapping it out is a simple two-step process: simply pull the old pod out, and click the new pod in.
How to charge a PAX 3?
To charge the PAX 3, connect the USB cord into the charging dock and plug it into the USB port on your computer or charging device. Carefully mount the PAX 3 onto the cradle. The four petals on the front of the device show the battery level of the device.
What is the unique feature of the PAX 1?
PAX 1 was unique in its portability and ability to operate discreetly. JJ O'Brien, PAX's Vice President of Strategy told Weedmaps News that it was the first vaporizer “that didn't look like a huge piece of cannabis paraphernalia.”.
What is a PAX 3?
What is the PAX 3? The PAX 3 is a handheld vaporizer that offers a convenient and tech-savvy way to consume cannabis flower and concentrate .
What is a ploom vaporizer?
Back in 2012, when the adult-use cannabis market was in its infancy, a San Francisco-based startup called Pax Labs (actually, Ploom at the time) released a portable loose-leaf vaporizer that would end up shaping the future of weed consumption. At the time most vaporizers were bulky, stationary devices like the iconic Volcano.
How much does a Pax 3 cost?
The PAX 3 by Pax Labs starts at $199.99, and a Complete Kit for $249.99 includes a concentrate inset, half-pack oven lid, a multi-tool, and three replacement oven screens. (Photo by Gina Coleman/Weedmaps)
How to activate a syringe?
Quickly press down on the center of the mouthpiece to activate the device. It will vibrate when to show that it's powered on.
When did the Pax 2 come out?
In 2015, the PAX 2 debuted with a sleek redesign, along with an improved battery lifespan and heating charge. Then, in November 2016, Pax Labs released PAX 3, the most technologically advanced device in the company's arsenal of loose-leaf vaporizers.
How long does it take for a vape to charge?
It should take around 3 hours for the initial charge.
How to change the temperature on a Pax 3?
The Pax 3 has four initial temperature settings with setting one being the lowest and four being the highest. To change the temperature between these, hold down the mouthpiece button for a couple of seconds until the petals start to flash. These will then show your current temperature setting, at which point you can press the mouthpiece button again to cycle through the different settings. Once you’ve chosen one, hold the mouthpiece button or gently shake the vape to set it: 1 Temperature setting 1 - 360ºF (182ºC) 2 Temperature setting 2 - 380°F (193°C) 3 Temperature setting 3 - 400°F (204°C) 4 Temperature setting 4 - 420ºF (216ºC)
How to turn off Pax 3?
Once you’ve had your ultimate vaping experience, simply turn the Pax 3 off by again holding down the mouthpiece button. The LED display petals will turn off to indicate this, but if for whatever reason you forget, the vape will automatically shut off after 3 consecutive minutes of not being used. Ensure to empty your oven after every session after the device has cooled and brush out the oven and the underside of the lid. And that, my friends, is it!
What is a Pax 3?
The Pax 3 is an intuitive portable vape that can do all kinds of amazing things to make your vaping session extraordinary, but it can’t expect us to be just as intuitive . And, with such a streamlined design, it can be a bit of a guessing game to figure out the tricks and techniques that can make this vape the best you’ve ever used.
How does a Pax 3 work?
The Pax 3 usually works best when the oven is packed tightly and when the herb is finely ground , as we discussed above. To achieve this it's best to use a grinder that has very strong teeth - that way you can finely grind the herb to the perfect consistency before packing it into your device.
How to keep a Pax 3 working?
One of the most, if not the most essential part of keeping your Pax 3 functioning well is always cleaning out your oven. If you do not clean out your oven post-session, you will find that your Pax 3 isn't going to perform as well as you know it should because it’s clogged and sticky. All that junk is basically barricading the oven’s heat so it doesn’t get through your oven chamber correctly. You're not going to get as much heat or as much airflow as you are supposed to, and quite frankly, you're not going to be satisfied with the performance of your Pax 3.
What is a user manual for a vaporizer?
The user manual on most of the vaporizers on the market today will be super informative and will allow you to understand what makes your vaporizer function correctly. It'll provide you with guidelines as to how to care for it, how to keep the vaporizer working well, along with how to get the most out of the vaporizer itself.
Why is my oven not producing vapor?
Loose material in the oven and not grinding fine enough are the leading causes of poor vapor production and disappointing results.
How many draws can you get from a fully packed vape?
Depending on how fine your herb is ground up the amount needed to fill the chamber ranges from 0.3g to 0.4g. When you fully pack it you can expect roughly 20 full draws before your herb is spent.
How to make a U shape on a screen?
What you want to do is bend up the edges of the screen so that it creates somewhat of a U shape – you can try bending it around a pencil to keep the curve uniform. Then, depending on the size of the screen you use, you’ll probably need to trim off the edges so that it will fit inside the oven properly, which you should be able to do easily with scissors.
Where is the screen on a vape?
Do you also put a screen on the bottom of the chamber of just on top as seen on above picture. The screen at the bottom of the chamber is the one the vape comes with, it looks more like a metal plate than a screen but that one goes at the bottom regardless if you use this top screen or not.
Can you use vaped bud in a chamber?
use already vaped bud to stuff the chamber when using a tiny bit of bud. supper efficient and tastes good.
Can you grind your herb?
First thing to keep in mind is that you’ll get a finer grind and more vapor if your herb is fully dried out with very little moisture left in it. After you initially grind your material you can try spreading it out on a sheet of paper for a short while to dry even more, then you can try vaping as-is or re-grinding again to break it down a little more.
Can you put a 4 piece grinder in the oven?
With a 4-piece grinder one thing you could try is holding it upside-down when you grind, this will mimic the action of a 2-piece model which can usually help get your herb a little finer. It is also very important to pack your herb tight inside the oven, you don’t want it loose in there at all.
How to charge a PAX era?
To charge the PAX Era, connect the USB-C cord into the charging dock and plug it into the USB port on your computer or charging device. The four petals on the front of the device show the battery level. Each petal signifies a 25% charge.
How long does a pax pod last?
Each PAX Era Pod will last you about two weeks when used regularly on medium temperatures. Higher use and higher temperatures will let you enjoy a full PAX Era pod for a few days since high temperatures tend to burn through cannabis material quickly.
What is a PAX Labs?
Probably the most recognizable name in the game, PAX Labs Inc stormed the scene when they introduced their portable loose-leaf vaporizers to the market.
How much does the Era Pro cost?
The Era Pro clocks in at $69.99 — that price tag gets you the device and a USB-C charger in a range of colors including black, red, jade or grey. Compatible pods can usually be found for around $40—$60 depending on your legal state and brand of concentrate.
Why do my pods glow yellow?
The device will vibrate and the petals will each glow yellow to indicate the temperature that the device is set to. Pop the pod back in once you land on your preferred temperature. Your pod will remember this temperature until you change settings — no need to set the temperature each time.
How long does it take for an era pro to charge?
Your Era Pro will come with a USB-C cord for charging, and brand new, straight-out-the-box Pros need about 45 – 60 minutes to fully charge: To check the charge, simply move the Era Pro back and forth. The petals on the front of the device will light up in a white color.
Is PAX a pro vape?
The people at PAX know what they're doing when it comes to manufacturing tech-forward vaping devices, and the Pro is no exception. I enjoyed the easy set-up, simple temperature control, and clean hits.