how do you fill a vape cartridge

How to Fill Vape Cartridges

• Step 1: Load your syringe: Your first step in filling your vape cartridge will be to get your syringe loaded with oil.
• Step 2: Attach an applicator tip: Once you’ve got your syringe loaded. you’re going to want to screw an applicator tip...
• Step 3: Unscrew your cartridge tip. Most cartridges on the market today are able to unscrew the...

Full Answer

How many times can you refill a vape cartridge?

Fill your syringe and gently push the syringe tip into the cartridge and fill it to the top, or where you find the max fill line. It is recommended that you leave the cartridge attached to your battery to help hold onto it better while refilling.

How often do you have to refill a vape?

Jul 07, 2018 · How to Fill Vape Cartridges Step 1: Load your syringe: Your first step in filling your vape cartridge will be to get your syringe loaded with oil. Step 2: Attach an applicator tip: Once you’ve got your syringe loaded. you’re going to want to screw an applicator tip... Step 3: Unscrew your cartridge ...

Can you refill vape cartridge?

Fill the cartridge slowly with your chosen e-liquid or vape juice (For our cannabis users, this can be your dosage of THC Distillate) You may use a dropper or small syringe piece to make this process easier Know the line to fill it up to and not overfill the cartridge tank After filling the oil cartridge, screw the mouthpiece back on again.

How to refill a vape pen cartridge?

May 12, 2022 · To fill the cartridge, remove the mouthpiece and fill the filler intended for the cartridge. How to use vape cartridge with a disposable option Unlike the refillable cartridges, the disposable cartridges lack the opportunity to be reused. The disposable cartridge employs the same structure as the refillable one but features a non-disassembly case.

How do you refill a cartridge?

How do you properly fill a vape?

How do you refill a disposable vape pen?

How much e-liquid should I fill?

Step 1

Fill the syringe with up to a 1 milliliter of the cannabis oil. Take care to choose an oil type fit for vaping so the the viscosity is right, and this will make refilling easier too. Some syringes don’t have that large of a capacity, but your cartridge will not take an enormous amount of oil either.

Step 2

Unscrew the flattened metal top of the vape cartridge. Set it aside and make sure it doesn’t roll off the table you’re using. Underneath and inside the cartridge, you’ll see there is a narrow opening down into the filling area.

Step 3

Next, take your oil filled syringe and hold it vertical, with the tip of it pointing straight up so you don’t drip oil. Most of these syringes come with a special applicator tip for precise dripping and some will have a cap to stop leakage from the applicator between use. This is a small piece of plastic that fits over the tip end of the syringe.

Step 4

With the applicator tip on, hold the vape pen or cartridge in one hand and upend the oil syringe to start adding oil. Instead of pouring the oil into the narrow opening discussed in Step 1, you’re actually going to inject the oil into the empty space of the middle of the vape pen around the center post.

Step 5

Pressing the back of the syringe, slowly release the oil into the vape pen. It is a deep brown in color and has a viscous quality to it, so it won’t pour like a regular liquid. When you add it slowly, you’re filling the vape pen cartridge evenly. As you finish it up, make sure that you don’t spill any oil outside the cartridge.

Step 6

Most vape pens have a 1 ml capacity, while the syringe might have a .5 ml capacity. If that’s the case, then after filling it, you’ll have to wait for the oil to finish going into the rest of the cartridge.

Step 7

Screw on the flattened metal top of the vape cartridge down firmly so it’s in place.

Step 1: Load your syringe

Your first step in filling your vape cartridge will be to get your syringe loaded with oil. We recommend using a syringe anywhere from 1ml to 10ml in size – they’ll all get the trick done. O

Step 2: Attach an applicator tip

Once you’ve got your syringe loaded. you’re going to want to screw an applicator tip onto your syringe. The applicator tip is going to allow us to really get into the cartridge and inject the precise amount of oil that we need into our cartridge.

Step 3: Unscrew your cartridge tip

Most cartridges on the market today are able to unscrew the mouthpiece from the base. The mouthpiece and the base are screwed together with what is commonly called a “510 Threading” According to Reddit, “510” is describing the length of the connector (5mm) and the number of threads it has (10mm).

Step 4: Inject your vape cartridge with your favorite oil

To do this, simply grab your loaded syringe and place the applicator tip inside the body of the vape cartridge and inject the oil. The syringe should come with measurement on the side so that you’re able to dispense precisely that amount of oil that you need. Most cartridges come in a .5ml or 1ml size.

Step 5: Let the oil settle

After filling your cartridge, you’re going to want to let the oil settle in the cartridge for roughly 12 hours before capping or turning your cartridge over on its side. This will ensure that your oil is settled into the cartridge properly, and can even prevent leakage.

Step 6: Screw the cap back onto your vape cartridge

The time has finally come for you to put a cap on your cartridge and bring it to it’s complete and finished product state. To do this, simply take your vape cartridge tip, and screw it back onto the vape cartridge body.

1. Unscrew the Mouth Piece

The mouth piece has a gasket on the inside that presses against the tempered glass cartridge. On the inside there is a thread that keeps this gaskets firmly in place, ensuring that the cartridge does not leak any oil or juice.

2. Pull the Mouth Piece Off

After 3 full turns the mouth piece should easily slide off of the inner gaskets on the center pole. If it doesn’t give it another little twist and pull gently. Once it’s off, make sure that you put the mouth piece somewhere safe. I always lose little things like that.

3. Fill With Your Fave Oil

Head to your favorite e-juice supplier or recreation shop and pick up your favorite flavor. Use the syringe or dropper to drip the oil or juice down in between the center pole and the glass while keeping a steady hold on the vape pen.

4. Replace the Mouth Piece

You know exactly where that little mouthpiece is, so grab it and gently push it back onto the pen. Make sure it is firmly against the threads on the inside.

5. Screw Together the Cartridge

Turn the mouth piece clockwise and after about 3.5 turns you’ll notice that it’s getting firm. You want it to be firmly on there but it’s not necessary to over do it.

Instructions

1. Unscrew your cartridge to get to the empty tank, most 510 threaded CCell and Liberty cartridges can be disassembled by twisting the components.

Conclusion

Filling distillate cartridges is relatively easy once you get the hang of it. We generally do not recommend reusing cartridges as they were made only to be used one time around and this can become wasteful of your oil as well as dangerous.

What are terpenes in cannabis?

Terpenes are all the rage right now with a wave of new terpene infused products that will both capture the cannabis audience as well as pique the interest of the health-conscious consumer . Terpenes are credited with giving Cannabis flower a uniquely broad spectrum of scents, tastes, an have even been proven to influence the effects of your high. Some terpenes like Limonene increase energy while some terpenes like myrcene promote relaxation so it is essential to choose a strain profile or terpene combination to support the type of feeling you would like to experience. Not only are there over 200 distinct terpenes that can be present in Cannabis but often times there are over 50 different terpenes in just one strain. These smells range from gassy, to citrusy, to earthy, and even fruity. Play around with different strain profiles until you find one that fits you perfectly.

How many terpenes are in a strain of cannabis?

Not only are there over 200 distinct terpenes that can be present in Cannabis but often times there are over 50 different terpenes in just one strain. These smells range from gassy, to citrusy, to earthy, and even fruity. Play around with different strain profiles until you find one that fits you perfectly.

What is the difference between high viscosity and low viscosity?

When high viscosity oil is put inside a cartridge, it produces an air bubble that does not easily move when the cartridge is flipped upside down. Low viscosity oils produce a faster moving bubble and are typically made by blending viscosity booster/liquefier/diluent and terpenes with the Cannabis or Hemp oil.

What is a viscosity booster?

Viscosity Booster. Viscosity booster is a great way to control your potency and stretch your dollar. Viscosity Booster also makes for a smoother smoke as it allows the concentrate to be turned into vapor with less heat than the oil alone.

Instructions

Unscrew your cartridge to get to the empty tank, most 510 threaded CCell and Liberty cartridges can be disassembled by twisting the components.

Conclusion

Filling distillate vape pen cartridges is relatively easy once you get the hang of it. We generally do not recommend reusing cartridges as they were made only to be used one time around and can break. This can become wasteful of your oil as well as dangerous.