The fill port for the KandyPens Rubi pods is on the side. It is stopped by a rubber grommet that is not attached to the pod but comes off entirely, making it easy to lose. The fill port itself is not so vast, so users might need to use a needle-nose dropper or a syringe to refill the cartridge.
How do I refill my vape cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
How to put oil in a vape pen?
So, you will probably need to remain stationary to avoid dropping oil all over yourself, your vape pen, and the area around you. Generally, you’re going to remove the cap to your vape pen and slowly, carefully begin put the oil inside.
How to fill a vape cartridge with flower?
If you’re pressing your flower specifically to fill vape cartridges, it’s especially important to use micron bags rather than using just parchment paper. This will ensure that you keep all plant material away from your rosin.
How much Oil can you put in a vape cartridge?
Even though you will find the max fill line on the cartridge, but if you do not always remember that most cartridges are designed to hold 1 gram or 0.5 grams of oil or e-juice. You are almost done! Take the mouthpiece and gently put it back onto the cartridge.
Can you refill Rubi pods?
0:421:41KandyPens RUBI - A Refillable Juul? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you take the top off and then this little ditty right here comes off. And take the dropper stick.MoreSo you take the top off and then this little ditty right here comes off. And take the dropper stick. It right in the little hole up. And then depress all the way down it holds about one milliliter.
How do you prime a Rubi?
Steps to load the Rubi vaporizer:Remove the mouthpiece from the Rubi.Remove pod.Open the pod and press the syringe into the opening, filling the pod with oil. ... “Prime” the Rubi pod by inhaling from the mouthpiece 3—5 times (only needed upon first use of Rubi pod).Replace mouthpiece into the Rubi.More items...•
How does a Rubi pod work?
The KandyPens Rubi Pods The pods come with a mouthpiece attached from which users inhale the vapor. Although not visible right away, when a user inserts a full pod into the device, there is a small viewing port next to the air hole. This viewing port allows users to check their liquid levels.
How do I refill my vape pen?
Open System devicesUnscrew the mouthpiece and battery from the clearomiser.Place the nozzle on the inside wall, avoiding centre tubing.Squeeze to fill the clearomiser. ... Screw the mouthpiece and battery back onto the clearomiser.Take a few shorter drags to prime your device for the best vapour production.
Can you use Pax pods in a Rubi?
The Rubi shares a similar shape and features to the Pax ERA but allows for users to fill the pods with their own choice of liquids and oils rather than having to continually buy pre-filled pods.
What is a Rubi vape?
This little vape is called the RUBI, it's a tiny little portable vaporizer for thin oils. Now this thing may look familiar, you may have seen something like this before, but this one's different. It's improved because this is an open system, so the pods or cartridges, whatever you want to call them, they're refillable.
How do you load a Kandypen?
0:222:11Kandypens Mini Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull off the mouthpiece to expose the heating chamber. Then. Using your wax tool load a small amountMorePull off the mouthpiece to expose the heating chamber. Then. Using your wax tool load a small amount of wax onto the ceramic coil replace the mouthpiece set the unit to your desired heat setting.
How do you use AK vape pen?
To use the K-Vape Pro, you need to:Remove the mouthpiece.Use the funnel-shaped chamber to load your herbs, and replace the mouthpiece.Turn on the device by pressing the power button five times.Hold down the power button to cycle through the preset temperatures.More items...
What is the K-vape?
The K-Vape Pro is a portable dry herbs vaporizer. The vaporizer features a hybrid technology combining the conduction and convection heating methods. It utilizes a ceramic heating chamber and uses a glass mouthpiece; therefore, the vapor it produces is fresh and pure-tasting.
How do you refill vape cartridge pods?
0:514:19How to Refill Juul Pods - [Guide to Refilling THE RIGHT WAY] - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just stick your nozzle in there. Give it a little squeeze. Make sure you get it filled up onMoreSo you just stick your nozzle in there. Give it a little squeeze. Make sure you get it filled up on both sides. You kind of want to fill. It.
Can I refill a disposable vape pen?
Unlike a prefilled vape pod kit, a disposable vape usually cannot be recharged. Therefore, you are taking a risk of wasting your vape juice after filling the device with eJuice and having no way of extracting it.
How do you fill a cart with distillate?
To fill one vape cartridge with distillate you'll pretty much only need the oil itself, the cartridge, a syringe, and a heat source. The syringe will be for injecting the distillate into the cartridge reservoir, and the heat source makes the distillate more fluid to make it easier to inject.
Why do you have to cover the holes on a vape pen?
Users have to cover the two holes for users to get a tighter draw, but it is good to leave them open because the airflow on these air holes gives good resistance and good cloud size.
What is the ohms of a Rubi pod?
One notable feature about the Rubi pods is the plastic build material, which has ceramic coils and organic cotton wicks for combustion. The coil is rated at 1.6-ohms, which can be used for mouth-to-lung inhalation. If you inhale long and hard enough, you can get some massive clouds.
What is a vape carter?
The vape carters for both e-liquid and cannabis oil vapers still stand out as a portable and reliable battery due to their sensitive nature.
What is Juul pod?
The JUUL pod uses prefilled e-juice pods with a unique nicotine salt blend with a content range of 5-7%. They come in many disposable one flavor e-juice pods. The liquid capacity of the JUUL is 0.7 ml compared to the 2ml pod size of the Rubi pods.
Why are kandypen pods used?
The KandyPens Rubi pods are designed to use thinner e-juices and low viscosity oils because thick oils could easily clog the pores and restrict airflow. The solution to this problem is thinning the cannabis oil using some VG.
What is the flavor of the Etchip 2.0?
This vape pod features the Etchip 2.0 flavor master coil and is compatible with many well-known e-liquids. You get an improved heating efficiency and a mesh coil that delivers a mouthful and original flavor from just one puff.
How to refill a cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
Step One: Remove the Mouthpiece
Open the cartridge up, and you can do so by twisting it counterclockwise until it is fully detached. You might have to twist it two or three full rotations to free the thread holding it in its place.
Step Two: Fill the Cartridge
This is the step where we will use the syringe we mentioned earlier. But if you do not have a syringe, an eye-dropper does the job as well. The former is more precise and has a lesser risk of leaking products.
Step Three: Replace the Mouthpiece
You are almost done! Take the mouthpiece and gently put it back onto the cartridge. Twist it around clockwise until it is tightly screwed on. While
How to know when a vape cartridge is done?
Before you jump into refilling your cartridge, you have to first know how to tell when vape cartridge is done. You wouldn’t want to put new juice in a cartridge containing other juice. Mixing juices isn’t always the greatest idea; you don’t know how they’ll taste or affect you together. Make sure you know your vape pen cartridge is completely empty.
What happens if you screw a vape cartridge on too tightly?
If you screw it on too tightly, you could break the cartridge. This same process can also be an effective way to figure out how to get all the oil out of a vape cartridge, should you have a problem with your cartridge or need to unclog vape cartridge.
How much oil does a cartridge hold?
Be careful to not overfill your cartridge. Most cartridges are designed to hold 1 gram or 0.5 grams of oil or e-juice. Know how large your cartridges are and don’t overfill them, or you won’t be able to use them properly and you’ll be out the oil.
Can you refill a vape cartridge without a syringe?
However, if you don’t have a syringe, you can figure out how to refill vape cartridge without syringe. You simply follow this same process, but with an eyedropper instead of a syringe.
Can you refill disposable vape cartridges?
Similarly, not all cartridges are the same. It’s not always possible to refill disposable vape cartridge. Sometimes, when you try to open them to refill them they just break or the only way to get them open is to break them, in which case the cartridge itself can no longer be used. Do your research before you jump into the task.
Is a vape pen the same as a cartridge?
Not all vape pens and cartridges are created equal. While they may all look similar and operate in a similar way, not all pens and cartridges are the same. Some vape pens have specific types of cartridges they use, so you’ll want to research what type of cartridge your pen takes and what it will take to refill them.
Can you refill a vape pen?
Vape pens are an incredibly convenient and affordable way to enjoy weed and/or CBD. You can always purchase other cartridges to refill your vape pen, but refilling the cartridges you already own is way cheaper, the trick is figuring out how to refill them without breaking them. In this article, we’ll walk you through the entire vape refill process ...
How to charge a Rubi?
To charge the Rubi, simply use the micro-USB port with any USB cable, no proprietary charger necessary. The LED indicator light will turn from red to green when the device has charged completely. While the battery lasts a while, it also charges extremely fast, about 30 minutes for a full charge.
How to clean a Rubi?
Just remove the pod, and use toothpicks or q-tips to clean in and around the mouthpiece. Due to the Japanese cotton around the ceramic coil, the pods can't be soaked and are thus kind of difficult to clean.
How much liquid does a pod hold?
For this device, you're going to want to think thin when it comes to oils, like distillates sold in syringes at the dispensary. Each pod holds about a half gram of liquid, and you're going to want the liquid to be at least body temperature to make dispensing it into the cartridge as seamless as possible.
Does the Rubi vaporizer have a power button?
Strong and simple, the Rubi vaporizer is also temperature regulated and air-powered (no power button), meaning all you need to do is load the refillable 1ML capacity pod, and inhale. KandyPens even offers a lifetime warranty on the device.
Why do you need to be stationary when filling a vape pen?
The most important part of filling a vape pen with liquid is going to be to make sure that you are keeping good track of the liquid itself and not letting it spill everywhere. So, you will probably need to remain stationary to avoid dropping oil all over yourself, your vape pen, and the area around you.
What is a vape pen?
First things first, the term ‘vape pen’ is a bit generic. There are all kinds of vape pens. Some vape pens such as a dry herb vaporizer, wax pen, and oil pens (pre-filled and reusable, empty ones) and this will all affect how you fill your vape pen. Not to mention, not all vape pens have the same styles or features, ...
How to use a dabber for vaping?
Use a dabber to load the wax coils but NEVER poke the coils directly and try to avoid contact at all costs. Just gently push the ball of wax towards the coil and the heat should do the rest while you are vaping. In addition, you will want to make sure you don’t overpack your wax pen.
Why is a glass globe vape pen more sensitive to damage?
For example, a glass globe vape pen might be more sensitive to damage because of the, well glass globe that can shatter if bumped the wrong way.
Can you overpack a vape pen?
In addition, you will want to make sure you don’t overpack your wax pen. This will cause it to strain and could contribute to the vape pen burning out, and in either case, over-packed coils will overflow when the wax bubbles-up from the heat produced by the coil.
Can you vape with two different oils?
Different oils have different operating temperatures and if you have two oils that work better at different temperature and power settings you might end up making your vape pen experience less than optimal. Not to mention the flavors might not taste good together and you may have wasted the vape oil.
Do all vape pens have the same features?
Not to mention, not all vape pens have the same styles or features, and many will differ in how they are entirely set up to begin with, even if the most basic science behind them is the same. For example, when thinking about loading a wax pen vs a dry herb pen you have to keep a few things in mind.
What is the ohm rating of Kandypens Rubi?
KandyPens Rubi pods are plastic in construction, but inside uses a ceramic core with organic cotton wicks. The coil has a rating of 1.6-ohms, so it does have some mouth-to-lung properties. Vapers could also get some large clouds if they inhaled long and hard enough.
What is the fill port on a kandypen?
The coils inside the pod use ceramic cell technology and the wicks inside each pod are organic Japanese cotton. The fill port for the KandyPens Rubi pods is on the side. It is stopped by a rubber grommet that is not attached to the pod but comes off entirely, making it easy to lose.
What is the nicotine content of Juul?
The Juul only uses pre-filled, e-liquid pods of a unique nicotine salt blend with content ranging from 5% to 7% nicotine . The pods come with several, one-flavor e-liquid pods and are disposable unless a user decides to hack the pods to refill them.
What is a kandy pen?
The KandyPens Rubi has an effortless design. KandyPens meant the Rubi to be a competitor to the Juul, another device famous for its easy-to-use style. The plug-and-play aspect of that other pod device is at work in the Rubi as well. Users need only fill the pod, plug them into the vape, and start vaping.
Can thick oil clog juice ports?
As KandyPens designed the pods for use with thinner, nicotine salt e-juices, thick oil could clog the juice ports and the airflow. One right way to solve this problem is by thinning out cannabis oil with some PG or VG, depending on what is available.
Is the Kandypens Rubi a good vape?
The KandyPens Rubi is an ideal device for casual vapers, not too concerned about power, durability, or performance. This vape, as it caters to both e-liquid and cannabis vapers, accomplishes the goal of being portable, easy-to-use, and discreet. The pods are well-built, leak-proof, although they have some deficiencies like the loose rubber grommet and the small fill hole.
Why are vape pens so popular?
Vape pens are, and will continue to be, one of the most popular consumption methods because they are discrete, portable, and inexpensive. You simply can’t bring your dab rig and torch everywhere with you easily, and if you’re like me, you’ve broken 15-20 rigs and bongs.
Is it safe to vape with PG?
Second, it keeps everything fairly natural. While the FDA says that PG and VG are generally safe to use, they mean eating it.
Can you use rosin in a vape tank?
I know what you’re thinking, rosin is too viscous for a vape tank and it won’t work. You’re wrong and you gave up way too quickly. If you’re pressing your flower specifically to fill vape cartridges, it’s especially important to use micron bags rather than using just parchment paper.
Do you decarb rosin before adding terpenes?
You’ll want to decarb your rosin before adding the terpenes, but after you’ve stirred them in, you’re ready to fill your tanks. Enjoy! Tags: rosin , rosin for catridges , vape cartridges.
Can you fill a vape cartridge with rosin?
Filling Your Vape Cartridges with Rosin. Pressing flower to make rosin isn’t necessarily a new process, but it’s growing popularity in the last few years has been, in part, a reaction to increased consumer awareness about the presence of solvents in their concentrate.
Can you cut concentrate in glass vape tanks?
If you use glass tanks, you won’t have to cut your concentrate as much because if the rosin is too solid within the tank to vape, you can simply use a lighter to heat up the side of the cart and liquify the rosin enough to move it around. Oldest trick in the book, works like a charm every time.
Do vape pens contain rosin?
Commercially manufactured vape pens typically don’t contain rosin because it’s easier and cheaper to use BHO, but have no fear, there are still options. If you have empty cartridge tanks that work with your pen, or you can find them online, it’s fairly easy to fill these carts with rosin and take your homemade extracts on the go with you.
