There are two ways to fill a Kayfun, so here are both methods: The safest way is to simply use the filling screw on the bottom (or side) of the base. You’ll need a syringe or needle-nosed bottle, but that one dollar investment can save you lots of money in leaked juice.
How do you fill a kayfun?
· Step 15: Once filled slowly turn into the upright position, dry vape on the kayfun and at the same time adjust the airflow screw until you find the right air draw for you, Once you have found the right draw for you do some more dry vapes to speed up the saturation of the wick, enjoy your newly wicked Kayfun 3.1.
Is the kayfun a good vape?
· To fill with minimal leaking do the following. 1) Place your finger over the adjustable air flow hole (left hole) and the primary air hole. Make sure both are fully covered, don't uncover until directed. 2) Take a test pull of air, you should get nothing. 3) Unscrew your top cap. 4) Fill to just below your threads.
Is a kayfun atomizer easier to build?
– Turn Kayfun mouthpiece down – Insert the nose of the bottle in the valve opening (2l) – Fill the tank by squeezing the bottle. The air will escape from the tank into evaporation chamber through the same grooves (2j). – Take out the nose of the bottle from …
What is the diameter of a 510 atomizer?
Material: Stainless Steel#N#The material of the transparent body: Polycarbonate#N#Diameter: 22 mm#N#Connector Type: 510#N#Dimensions (not including connectors and mouthpiece) / volume:#N#Standard: 60 mm. / ~ 4.5 ml.#N#Long version: 81 mm / ~ 10 ml.#N#Super-long version: 102 mm / ~ 15 ml.#N#Long and super-long versions can be built with extra body and one (long version) or two (super-long version) evaporation chamber extenders. Extra body and evaporation chamber extenders are not included in the base kit. In theory, length/volume can be extended indefinitely with additional bodies and extenders. Each extension step adds 21 mm in length and about 5 ml. of volume to the atomizer. However, the longer the tank, the greater the chance of leakage because the longer tank can’t keep low pressure due to large volume of air in it. This can potentially lead to flooding.
What is a collector tank?
Collector tank acts as a small reservoir to collect any excess liquid that can leak. Leakage can occur at the base of the atomizer while refilling or when the user performs a strong inhalation of the device.# N#Collector-tank has a 510 connector and is compatible with any battery mod that also supports the 510.
What is Kayfun 3.1?
That might be a bold statement, but in a short amount of time, it went from a boutique product to one of the top choices in rebuildable atomizers. Offering a killer combination of excellent flavor, good vapor production, solid construction, and an easy build, the Kayfun quickly inspired a plethora of copycats and clones and became a staple in almost every vaper’s arsenal.
Is Kayfun a good vape?
The Kayfun is a great device, plain and simple. Just remember these tips – keep the juice channels clear, perfect your wick length/placement, and keep your coil glowing evenly – and you’ll take your vaping experience to a new level.
What is Kayfun 3.1?
The Kayfun 3.1 is a durable, stainless steel rebuildable atomizer designed to intensify the flavor of your e-liquid - the silica wick and wire are housed inside a conical chamber which funnels the vapor straight up for your enjoyment . The result is greatly enhanced flavor!
Is Kayfun 3.1 easy to disassemble?
The Kayfun 3.1 is very easy to disassemble. It comes with a removable drip tip. You will also receive extra packets containing silica wick and wire, spare screws and o-rings, and a miniature dual-sided (phillips/flat head) screwdriver with a key chain attachment.
