How do I change the coil on my Smok mod?
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option. On a touchscreen SMOK mod, simply tap the NEW option.
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
How do I set up different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running. If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
How do I Wake Up my Smok mod?
Once you’ve unboxed your SMOK mod, and you have installed the correct batteries in the right orientation, simply click the fire bar FIVE times to wake the mod. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.
How do you change the coil in a Smok vape?
0:385:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise.MoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise.
How do you open a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
How do you use a Smok g150?
1:203:11Smok G150 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipFunction will stick and wattage mode for now just to show you. Get a couple more clicks. Hold thatMoreFunction will stick and wattage mode for now just to show you. Get a couple more clicks. Hold that button in and now you can choose your strength. It does have a soft normal.
How do you remove Smok Nord coils?
1:018:11SMOK Nord Coil Replacement - How To - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf it has juice in it. If you pull I just want to show you what happens here. If you pull out theMoreIf it has juice in it. If you pull I just want to show you what happens here. If you pull out the coil. Juice will come out the tip. Okay actually it's not fully enough for all the juice to come out.
How do I know when my coil needs changing?
5 Signs That Your Coil Needs ReplacingBurnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. In this case, your device is literally telling you to change the coil. ... Weak Flavour. ... Little Vapour. ... Leaking Device.
How do you tell if a coil is burnt?
1. Your Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. When you vape, you'll experience a truly horrible 'burnt' taste in the back of your throat – acrid and unpleasant, it can even make you feel sick.
How do you change a Smok battery?
1:022:38How to change the batteries in your vape device - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd for you average person out there because there's no markings on the side of them often very hardMoreAnd for you average person out there because there's no markings on the side of them often very hard to know which is a positive which is a negative.
How do you put a new coil in a Smok Nord?
First, you take the pod when you've finished the e-liquid off the top of the Nord 4. It's held magnetically and should easily be removed with a little persuasion. Next, you will see the coil inside the pod, again lined up by grooves. Take this out and get your new coil.
How do I change the coil on my Nord vape?
1:385:48SMOK NORD How to change & prep a coil Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd if we look at the coil again we've got two o-rings at the top they slide into a smaller hole atMoreAnd if we look at the coil again we've got two o-rings at the top they slide into a smaller hole at the top of the pod. And and one big o-ring at the base which is going to hold it in place nice.
How do you unscrew a Smok?
0:453:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila.
Paovalle New Member
I have bought the smok g150 mod. I want to update the software but on the smok site i can t find any firmware or section for my box. Does anyone know something about it?
Tonee N Vaping Master Verified Member ECF Veteran
I have bought the smok g150 mod. I want to update the software but on the smok site i can t find any firmware or section for my box. Does anyone know something about it?
What is the Smok G150?
The Smok G150 is a high powered and portable mod that uses one of the best tanks in the industry. It sports a 150 watt variant of the Alien chipset and uses an onboard 4.200 mAh battery. The mod’s body is shaped like a miniature canteen, making it comfortable to hold and convenient to put in a pocket or bag. When coupled with the Big Baby Beast Tank, it provides incredible flavor and vapor production that can last an entire day.
How many watts does a vape use?
The vape goes up to 150 watts. Some people like devices that go higher, but most people do not go that high because the vapor gets too hot, and such high temperatures drain the battery. The best flavor for this mod is around 75 to 100 watts, but the user has an additional 75 watts to play with if he or she wants to power up a little further. Going to the higher wattages means burning through a lot of juice, which is why 75 to 100 watts is a good level.
Is the Baby Beast vape good?
The tank performs marvelously, providing the user with plenty of vape juice, and the vape offers plenty of power and battery life. Yes, other vapes can go to higher wattages, but most people do not vape over 200 watts, so why buy something with an unneeded feature?
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.