Give the tank a quick reset. Learning how to perform a SMOK factory reset for Alien, ProColor, Priv V8, and other mods’ tanks is a handy skill to have. First, altogether remove the tank from the mod, making sure its screws are tightly fastened. Press the fire button, then reattach the tank.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I perform a smok factory reset?
Learning how to perform a SMOK factory reset for Alien, ProColor, Priv V8, and other mods’ tanks is a handy skill to have. First, altogether remove the tank from the mod, making sure its screws are tightly fastened. Press the fire button, then reattach the tank. Choose “n” when the device asks if you are using a new coil.
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
How do I vape with the smok rpm 2 coil?
SMOK recommends waiting at least 15 minutes before vaping with a new RPM 2 coil to ensure that the pod’s wick is completely saturated with e-liquid. Puff gently on the pod twice without pressing the fire button before you begin vaping. To vape with the SMOK RPM 2, puff on the device while holding the fire button.
Why did my SMOK vape stop working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
Why is my SMOK vape blinking 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
How do I get my SMOK vape to work?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you reset a SMOK Nord 4?
Device On/Off – Press fire button 5 times in 2 seconds. Puff Reset – Number of puffs will reset when you reach 999.
Why does my Smok keep flashing?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output. 3. Low voltage protection: when battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down the output.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my SMOK Nord not firing?
If your SMOK Nord is failing to fire, first check to make sure the device is fully charged and is on. To turn the device on, simply click the fire button five times and check to see if the LED on the device turns on.
How do you unlock the power lock on a SMOK vape?
3:508:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
How do I reset my SMOK RPM 2?
Usage is pretty simple too. The RPM2 Pod has the usual 5 clicks off/on, as well as 3 clicks of the fire button to lock the device. Holding down both up and down buttons locks and unlocks the wattage. Holding the Power and down buttons allows you to reset your puff counter.
How do you reset a SMOK Nord 2?
If your SMOK Nord 2 isn't hitting, the most likely reason is that the device is locked. Press the power button five times to unlock the device. If it still doesn't work, make sure that the battery is fully charged. Try reseating the coil and pod.
Why is my SMOK Nord blinking 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
How to vape with a smok?
How to Vape With the SMOK RPM 2. To vape with the SMOK RPM 2, puff on the device while holding the fire button. The RPM 2 has an 80-watt power range, but you should begin vaping at a much lower wattage than that until you’re certain that the coil you’re using can operate at 80 watts without burning the cotton wick.
How to charge a SMOK RPM 2?
The SMOK RPM 2 has a USB charging port and comes with a charging cable. To charge the RPM 2, use the cable to connect the device to your computer. The device’s display will indicate when the charge cycle is complete; disconnect the charging cable at that time.
What is a SMOK RPM 2?
The SMOK RPM 2 pod system is a device that deftly straddles the line between the simple pod-based vaping devices that beginners use and the more advanced and feature-rich mods that expert vapers prefer. It’s got the small size and convenience that made you fall in love with pod systems, but it’s also got some of the “power user” features that you’d expect to find in a full box mod.
Why does my SMOK RPM 2 make a gurgling sound?
If you flood the coil, you’ll notice a gurgling sound when you vape as the excess e-liquid begins to creep up the pod’s chimney.
How to fill a e-liquid pod?
Insert the tip of your e-liquid bottle into the pod’s filling port and squeeze the bottle gently until the pod is nearly full. Leave a bit of room for air at the top of the pod. Close the filling port and return the pod to the device . If you’re filling a new pod for the first time or replacing the coil, refer to the next section about how ...
Is the Smok RPM 2 compatible with the coils?
The RPM 2 is compatible with the coils for the original SMOK RPM and also has several new coils of its own. With the replaceable coil system, the SMOK RPM can deliver whatever type of vaping experience you want. Enjoy a high-nicotine mouth-to-lung experience or chase clouds to your heart’s content – the choice is yours.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
How to get the best performance from a Smok Novo?
In order to get the best performance possible from your SMOK NOVO, you’ll want to prime the coils. Priming your SMOK NOVO’s coils ensures that the cotton inside the coil is adequately saturated before you use it and this, in turn, ensures you get great flavor from the first draw.
How to prime a Smok Novo coil?
And here’s how you prime your SMOK NOVO coils: ensure there is no juice in the pod when you remove it; take the new coil, drop vape juice onto the cotton, a few drops will do; insert it into the pod, fill with juice. Next, make sure there are no air bubbles.
What does it mean when your Smok Novo tastes burnt?
If your SMOK NOVO tastes burnt, it means the coil is spent. As soon as the flavor of your vape juice starts deteriorating, this is a sign that the coil is failing and you should think about swapping it out for a new one. Using the right type of vape juice is important too.
How many puffs does a smok novo have?
The cotton around the coil only has a certain amount of cycles – usually about 400 puffs – before it breaks down to the extent that it can no longer produce flavor. When this happens, the SMOK NOVO will produce a burnt taste. This means the coil is spent and it is time to replace it.
What is the size of a smok novo?
SMOK NOVO – The SMOK NOVO is the OG version of the line; it was the first pod vape to carry the branding NOVO. It has dimensions of 88.3 x 24.3 x 14.3mm and it uses a 450mAh battery.
Why does my Smok Novo autofir?
The autofiring issue on the SMOK NOVO is caused by vape juice getting into the air sensor. In order to stop the SMOK NOVO from autofiring, you’ll need to take the NOVO apart and wipe away any errant vape juice residue from inside the device.
Does the Smok Novo have buttons?
Designed to be compact and simple to use, the SMOK NOVO does not have any buttons and/or settings for you to worry about. Like the JUUL vape, the SMOK NOVO is a plug and play device – you fill up the pod with vape juice, insert it, power the device on, and start vaping. Simple, right? It really is.
What Causes The Connection Issue?
A connection issue can be caused by a variety of reasons. You could have accidentally dropped your device, one of the two pins inside the connection area can be stuck due to dirt or grime, or you could have a coil that isn’t functioning properly.
How To Fix The RPM Series No Atomizer Warning
Before throwing out your coil and buying new SMOK Nord Replacement Coils, follow these few steps and put them into action. The connection issue you are having could be a simple fix that won’t cost you anything out of pocket.
Conclusion
The SMOK RPM (Real Pod Mod) series is a list of awesome devices that perform exceptionally well. If you maintain the device properly, you can have it for a long time to come. It is good to note that mishaps happen with any device, such as drops or things just simply not working as they should. Just diagnose and repair.
