The SMOK Procolor mod has some pretty easy to learn controls. The Procolor works by clicking the fire button and using the two front buttons to navigate. On the home screen, the wattage can be changed using the two front buttons as well.
How do I Turn on and unlock my smokvape?
Here’s a quick rundown of how to turn on and unlock your SMOKvape and what to do if you run into a problem. First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do you use a vape?
Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time. Once your device is unlocked, press the main fire button three times to access the device menu.
How do I unlock my vape device?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time. Once your device is unlocked, press the main fire button three times to access the device menu.
How do I turn my SMOK vape on?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do I change my SMOK vape settings?
0:392:16And when you're wanting to adjust the wattage. Press the power button three consecutive times andMoreAnd when you're wanting to adjust the wattage. Press the power button three consecutive times and then continue pressing it to cycle through the watts.
How do I turn off SMOK ProColor?
If you want to turn it off, you need to either go into the menu; click the firing button until you see the Power Off option and then turn it off there, or you can lock the device by pressing the firing button 5 times and then holding the fire button down for about 5-7 seconds while it's locked.
How do you unlock a SMOK vape?
0:100:48It's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you use a vape mod for beginners?
All you need to do is hold the fire button down while you draw vapor from the mouth piece. E-liquid and oil vape tanks will put off vapor almost immediately, while it may take a dry herb or wax atomizer a few seconds to heat up and put off vapor.
Why is my SMOK vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do I know if my Smok vape is charging?
When it's time to recharge, that LED will start to blink and the battery will no longer activate. After you connect it to a power source, the LED will light up red while the device is charging, and will turn off when it is completely recharged.
Why does my Smok vape say power lock?
It features a 5 click lock system to prevent accidental misfires while your device is stored. To lock or unlock the device press the main fire button 5 times in quick succession. You can power your device off to conserve battery life by entering the menu system.
How do I reset my SMOK?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Why is my vape not unlocking?
The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.
How do you unlock Watts on SMOK?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
How to turn off Smok?
After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach the power option, which may read “Power On” or something similar. Using the main fire button, change this to read “Power Off.”
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Why is my smok vape not charging?
It could be that your firing pin has vape juice on it , or it might not be coming in contact with the charger.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
Do you need to charge a vape battery?
The vape batteryneeds to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode.
How many coils does a SMOK Procolor 225W have?
The SMOK Procolor 225w kit comes with two coils for your tank as well. One of these coils is already pre-installed inside your tank. The second coil that’s included can be found inside a little bag. The pre-installed coil is the Q2 0.4 ohm with dual coils, the second is the T8 0.15 ohm with octuple coils!
How to change power mode on SMOK Procolor?
Although, still… It’s nice to have options. To change the power modes, simply go into the Procolor settings. To access the settings, you simply click the fire button 3 times fast and this screen should appear…
How does the Smok Procolor mod work?
The SMOK Procolor mod has some pretty easy to learn controls. The Procolor works by clicking the fire button and using the two front buttons to navigate. On the home screen, the wattage can be changed using the two front buttons as well. This mod can also be locked to prevent the fire button from going off in your pocket.
How to change the color of the LED light on a Procolor?
LED Shield Light – By far, one of the coolest features is the Procolor light shield! To access the settings for this, simply click the fire button 3 times fast and continue to click the fire button until you reach the screen that says “Led Settings”. From here, you can choose what color you want your vape to light up and how and when you want it to light up!
What is a lock on a vape?
Locking / Unlocking – “Locking” is a useful feature for most devices . This stops you from accidentally pressing your fire button when you don’t mean to. Really handy for people that carry their vape in their pocket. To lock or unlock your vape, simply click the fire button 5 times fast…
How much juice does a TFV8 hold?
It’s well made! The TFV8 has several different coil options to choose from and is capable of holding up to 5 ml of juice at a time. The tank is filled from the top, with the airflow located near the bottom, just how we like it…
Does the Smok Procolor have a fire button?
The SMOK Procolor has a big fire button on the side that’s easy to grip, along with two additional buttons on the front. Having an easy to read menu, not to mention additional buttons, navigation feels more smooth and effortless. From within the menu, you can also find multiple power options.
What is the SMOK Procolor?
The SMOK ProColor utilizes, like the Alien , a longitudinal firing bar that runs alongside the mod, but you only need to press on the upper portion to activate the mod and to fire it. It has an overall symmetrical design that I thought was very fetching.
What is a Procolor 225?
The ProColor 225 is a beautiful device that works a lot like a smartphone than a typical box mod with two 18650 removable batteries. Gone are the tiny selector buttons, and sometimes difficult to read LED readouts. And in their place, SMOK has opted for an easier to use (after some reading of the instruction manual) interface that combines a large, OLED screen on the front of the mod that offers options ranging from wattage and temperature control to adjustments you can make to display itself.
How many different colors are there in Procolor?
I said it from the outset, the ProColor fulfills the promise of its name and explodes with color and vibrancy. And with over eighteen different color schemes to choose from, there is no shortage of colors to please any and all kind of vapers.
Is Procolor the same as Alien?
The ProColor has a lot of similarities with its older brother the Alien, but I don’t think it fair to compare the two, mostly because they are from the same company. I decided to pair the ProColor against the Innokin Coolfire IV TC100 since it has a comparable power output and other adjustable features.
What is the main screen on a vape?
Main Screen: This screen allows you to check your battery life, adjust temperature, and wattage, your puff count, and which mode (nickel, stainless steel, titanium) you are vaping.
Is Procolor a good vape?
But, then again, if you do enjoy that quest to find the vaping sweet spot then the ProColor is an ideal device for you. If you’ve already tried something like the Alien, also from SMOK, the ProColor is similar, save for that new interface and the LED shield with which you control the ProColor.
Does Procolor have more features than the rainbow?
The ProColor does have more features than there are colors in the rainbow, so if you are not a fan of finding your ideal vaping settings, then the work you have to do to go through all the various options on this SMOK mod might frustrate you.
How to use the Smok Procolor?
The SMOK ProColor runs on OLED display that is packed full of information. You navigate its settings using the fire bar (three quick clicks) and then the + and – keys to move around the menu. Selecting something is as simple as firing the fire bar.
What is 510 connector?
The 510 connector is spring-loaded with a brass pin and is buttery smooth, regardless of what you’re installing . I’ve had RDAs, RDTAs, and SMOK tanks running on the SMOK ProColor during the past few weeks and all of them sat flush to the mod and ran perfectly.
Do you need to prim a smok coil?
Priming SMOK coils properly does help a lot, but every now and then you get a coil that is simply bust, that’ll dry hit after a day’s use, despite correct priming. If you’ve used enough SMOK tanks or any other sub-ohm tank for long enough, you will know this is just a fact of life.
Is Smok Procolor complicated?
The SMOK ProColor can be as complicated as you like too; but if you just want a laid back vaping experience, it’ll shift into that style just as easily. And this is what I really like about the SMOK ProColor – it’ll be whatever you want it to be and it’ll run wherever you stick on top of it.
Is the Smok Procolor a tank?
Overall, the SMOK ProColor is built like a tank. It feels solid in the hand, features a great OLED display, and looks suitably premium in the hand. I love SMOK’s fire bar, I love the styling of the SMOK ProColor, and I really like that you can get it in 18 different color options.
Is the Smok Big Baby tank good?
The SMOK Big Baby tank is decent enough for most users. It gives great flavour and big clouds, and you have a fairly wide selection of coil options to choose from.
Does the GAIA RDTA work on VooPoo?
But when I popped the GAIA RDTA on my VooPoo DRAG, it worked first time – no atty shorting. I had a play around with the PROCOLOR, adjusted the spring, checked the atty inside my RDTA, but nothing could get it to play nice.
