One of the most common reasons your Ooze pen is blinking green is because the battery has died and needs to be charged. When your Ooze vapor battery is dead, it will typically flash green 10-15 times. Start by plugging it into the charger. If the pen lights up green and the charger lights up red, your pen is dead!
Full Answer
Why is my vape pen not charging?
Problem #2: My Vape Pen Won’t Charge or Draw The most common reason for this is there isn’t proper contact between the battery and the cartridge, meaning your battery can’t fire the heating coil. This can be solved by adjusting the connection plate inside the thread to get better contact with the battery.
How do I know if my vape pen battery is depleted?
Watch for the red light that tells you it's time to recharge your battery. When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.” Hold off on using your vape pen again until it’s been charged.
How long does it take to charge a vape pen battery?
The battery contains no charge at the outset, so the first thing new users will want to do is charge the pen, which will take three or four hours. The battery will stay charged for about a week (which is extremely impressive by vape-pen standards), and the red light blinks green once it’s done charging.
How do I hook my vape pen up to the Charger?
Hook your vape pen up to its charger using the included USB cable. First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
How do I know if my pen charger is working?
The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
How do you fix a non charging vape pen?
If you're using a cartridge, try switching it. If the vape pen works with other cartridges, the issue may be just with the one cartridge, not your vape pen. If you're using a pod or if the problem doesn't resolve, check that the round centerpiece from your pod or cartridge is aligning perfectly with the battery.
How do I know if my vape battery is broken?
If you are vaping at roughly the same wattage but consistently notice the battery does not last as long as when you first started using it, it's likely an indicator that you need to get a new one. Another sign that a vape battery needs replacing is that it gets hotter than normal either when recharging it or using it.
Why does my vape pen not work after charging?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How do you fix a vape if it doesn't turn on?
If you don't hear or feel a click, it could mean that the button is broken. If after trying that your vape still wont turn on, check if it needs charging. For built in battery devices, plug the device into a USB plug using the cable provided in your kit.
How long do vape Chargers last?
Most vape batteries usually provide between 200 and 500 cycles. That means that you get between 200 and 500 full charges before the battery stops working. The final number depends on the device you are using and how often you use it.
How do you fix a battery charger cartridge?
0:191:16How Do You Fix a Vape Pen Battery? - O2VAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a very simple fix what we often tell people to use is just a paper clip. And if you stick theMoreSo a very simple fix what we often tell people to use is just a paper clip. And if you stick the paper clip in between the connection plate and the threads.
Do vape pens wear out?
They only last as long as the single fill of vape juice in them, which may be only a day or as long as three days. It heavily depends on how often you take a drag on your vape pen. Heavy users will find that they dispose of this type of vape pen within a day.
Why would a vape pen stop working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
Why does my pen blink when I try to hit it?
If the issue is a leak, turn off your battery and take a Q-tip dipped in rubbing alcohol and clean where the battery and cartridge meet. Make sure to dry them before screwing them back together. Another reason your battery may be flashing is because it may be dead and needs to be charged.
Why won't my vape pen heat up?
If your pen's atomizer isn't heating, first to make sure that your battery is charged and turned on. Then check the connection between the battery and your atomizer or cartridge. If it is dirty, clean it with a cotton swab. You will also want to make sure this connection isn't overtightened.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to loosen up cannabis oil?
If you don’t have a hairdryer on hand, there are other ways to loosen up your cannabis oil. Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
What does it mean when your vape cartridge is low?
If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
What is the O.Pen Vape?
Though their most basic model is rooted in simplicity, O.pen Vape offers a wide range of products for more advanced vape users. Their flagship pen as well as a smaller model called the Go.pen can both be customized with your name or desired message for an extra cost. They also sell a glass mouthpiece, called the Helix, that can be used with the Go.pen. The Go.pen itself is a more traditionally-styled vape pen, with a button that controls the heating element, and a small and portable design.
How much does an O.Pen vape cost?
Their flagship product, aptly called the O.pen Vape, is sold at a $20-$25 price point, and uses pre-filled cartridges (often priced $30 and above per cartridge) that can simply be screwed onto the battery and heating element — no more trying to delicately place wax onto a small and fragile coil.
What is the selling point of O.Pen?
The biggest selling point of the O.pen has to be its simplicity, hands down. It can be transported, refilled, and charged all with minimal hassle. The biggest downside? Probably the restrictive cartridge system, which makes it very difficult load your own cannabis oils and concentrates. Considering your best bet is to use the vape pen with the vape cartridges made by O.pen, it further exacerbates the problem by forcing you to seek out said vape cartridges, which might not be readily found at dispensaries near you.
How to use O pen?
Using the pen requires a cartridgethat screws onto the threaded tip where the USB charger is initially located. For most, purchasing a separate pre-fill ed cartridge will be the easiest way to jump right into using the O.pen. The O.pen company sells their own cartridges, which are generally about 30$ for half a gram, or 50$ for a full gram, although we’ve heard prices in Colorado are much more friendly. Though this can cost more than the pen itself, some dispensaries will throw in the pen for free with purchase of one or more cartridges. The chassis uses a standard 510 thread size, so pre-filled cartridges from any other company also utilizing this size will work with the O.pen as well. That’s a huge plus for us.
How long does the O pen stay on?
The heating element will stay activated for up to eight seconds (signifying the “Perfect puff”) at which point the LED indicator on the bottom of the pen will blink.
How long does it take to charge an O.Pen?
The battery contains no charge at the outset, so the first thing new users will want to do is charge the pen, which will take three or four hours.
Does O. Pen work with 510 thread?
The chassis uses a standard 510 thread size , so pre-filled cartridges from any other company also utilizing this size will work with the O.pen as well. That’s a huge plus for us.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to tell if a vape pen has a battery?
You can usually find this information in the users manual or instruction booklet that came with your vape pen. Integrated batteries typically take the form of an elongated tube or cylinder (which attaches to the cartridge, or the part that heats the e-liquid), whereas removable batteries are housed inside casing of the pen itself.
How to charge a vape pen?
If your vape pen runs on removable batteries, you’ll need to take them out before you can charge them. Look for the removable battery cover on the bottom or side of your pen. Once you find it, press the thumb latch or tab to pull it open.
How to hook up a vape pen to a charger?
First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
What happens if you use a vape pen in a low battery state?
Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
What does it mean when your vape pen is red?
When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.”. Hold off on using your vape pen again until it’s been charged. Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
Why is my vape pen burning out?
If your vape pen has a "soft start" mode and you’re not in a hurry, consider using it. Soft start charges batteries at a slow rate rather than quickly at high heat , which can cause them to burn out faster.
What type of battery is used to power a vape pen?
This usually involves fitting the cartridge into a separate device that houses the batteries. The most common type of removable battery used to power vape pens are 18650s. These look similar to standard AA batteries, only bigger. Tip: Not all 18650 batteries are designed to be used in vape devices.
Why does my vape light blink?
A blinking light is an indicator of one of 3 correctable issues. The first is that your vape battery is not holding enough power and needs to be charged.
Why does my vape tank spitting out liquid?
If your cartridge or vape tank is spitting liquid out of the mouth piece, your voltage is set too high and your material is literally boiling.
Why does my vape auto fire?
If you have a disposable vape auto-firing, this is because you’ve accidentally took a drag from the wrong end. You will have to either blow into the wrong end or take a drag from the mouth piece end of the device. BUT YOU MUST ACT QUICKLY.
How to get sticky residue off of a button?
Fix this by wetting a Q-tip with rubbing alcohol and wiping it onto the sides of your button to dissolve any sticky liquids that may be there. Should you discover any solid debris, use a toothpick, safety pin or small paper clip to dig out the buildup.
Why is my vape pen not charging?
Even if you can’t see the difference between two chargers ( or two USB cables ) there’s a chance that something inside might be smidge different — and that smidge can be the cause of your device not charging.
How to use a vape pen properly?
When you inhale, make your drags long and steady; keep the vapor in your mouth; inhale it into your lungs, and then exhale. Remember — this is not a regular cigarette. You’ll need to change your angle of approach a lil’ bit.
What does it mean when a vape pen makes a gurgling noise?
Gurgling noises in a vape pen are almost exclusively a sign of a flooded tank.
Why won't my vape pen fire?
What your vape pen is telling you is that it won’t fire because it doesn’t have the appropriate tech connected to the battery.
Why is my e-juice leaking?
When your e-juice is leaking through the airflow holes, it doesn’t have to be that the issue is in the tank — the issue might be in the pressure or the juice that you’re using. Use thicker vape juice — or, you know, don’t leave your vape pen out in the sun because that will cause the juice to become more viscous.
How to force pen to go into menu mode?
Press the power button three times — this should force the pen to give some indication of life as it will usually force it to go into the menu mode.
How to clean a septic tank?
Drain the tank — after draining it, soak up the excess juice with a paper tissue. Fill the tank back up (correctly this time), and you should be good to go. Run the tank through hot water — same as above, empty it, clean it, and then run it under hot water. Make sure that everything is dry before using it again.
How to tell if a vape pen is fully charged?
Typically the pens will have a light that blinks while you charge it. Then when it’s fully charged the light will just steady stay on. Other ways I’ve seen are a red, or yellow light that changes green. If there is no light on the side of the pen it can be on, around, or under the firing button. Also the light could be somewhere around the mini usb, or type c plug that on the booth/side of the pen. (so where you plug the wire into the vape)
How to charge an E-Cig?
You will connect your e-cig to the battery charging cable provided at the time of purchase and look at the LED light on the side. The red light/green light system works here- if the light is “green”, the battery is fully charged; if the light is “red”, it is time to charge the e-cigarette.
What to do if battery threads are not charging?
If your battery’s threads are clean and you’re still not getting a charge, try charging the battery in your USB charger, your pack, and car charger (if applicable).
How long does a vape battery last?
Typically, a vape battery can last for many years, depending on amount of use and care. Here are some tips to ensure your battery works optimally and consistently provides flavorful vapor.
How to clean battery threads?
Take the cotton swab and rub it over the battery threads in a circular motion. If the threads were dirty, you will see the residue on the cotton swab.
Why is my battery coil bad?
The coils in your battery could be bad if they’re not heating up, but there could also be a connection issue . Try cleaning the top of the battery with a cotton swab and isopropyl. Coils will eventually need to be replaced, but the frequency depends on usage.
What happens if you drop a battery in water?
Did you drop your battery on the ground or in water? Unfortunately, it could be permanently damaged if the internal connections have been interfered with. If nothing else is working, it may be time for a new battery.