Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
Full Answer
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
What should I do if my Smok vape won't turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: 1 Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to... 2 Check the battery to confirm that it’s properly inserted. Depending on your model, you might be able to pull out the... More ...
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
What if I don't have a vaping plan?
If you don't have a vaping plan, please set the "puff setting" into the "Never" mode. 1. "puff clear" &"puffs reset" = reset the vaping puff data which has been generated to 0
Why does my vape say don't abuse protects?
When there is "short atomizer" or "don't abuse protects" error message on your screen. First, be aware there is a short circuit of your tank or your battery.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you fix a Smok vape?
If your SMOK vape isn't turning on, it could be a quick fix:Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use.Check the battery to confirm that it's properly inserted.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I unlock my SMOK vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
Why is my SMOK vape blinking 4 times?
If the LED blinks four times when you press the fire button, there is a problem with the connected atomizer coil. Either the coil has a short circuit, or the resistance of the coil is outside the device's supported range. Either way, the remedy is the same; you should discard the coil and install a new one.
Why has my SMOK vape stopped working?
SMOK Wave Not Hitting It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod. If the pod doesn't firmly touch the connections inside the chamber of the SMOK Wave, the device won't work.
Why does my SMOK vape keep blinking?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output. 3. Low voltage protection: when battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down the output.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
Why is my vape saying shorted?
Atomizer Short or Short Circuit When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil.
Why does my vape battery says shorted?
A 'Shorted' or 'Check Atomiser' error message means somewhere in the device's connection, the atomiser is causing an electrical short circuit. To resolve the issue, you will need to replace the coil in the tank.
Why is my cart saying shorted?
If your vape flashes up an error message saying shorted or something similar, it is telling you that there is an electrical short occurring. When an electrical short happens the built-in protection circuit on a regulated MOD will kick in, and this will stop your e-cigarette from working.?
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What is a puff counter?
The puff counter is designed to allow users to track how much they vape, as well as place limits on the maximum number of puffs they take per day. Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
Why is my ohm error so high?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
Why is my vape so hot?
I. Normal circumstance: When you vape for a long time (eg：chain-vapes more than 10puffs with high wattage), it would give a "Too Hot" warning to protect the device itself.
Can you touch a vape for a long time?
I. Normal circumstance: When you vape for a long time, you might feel it is overheated that you can't even touch it. Please take out the batteries (if it's replaceable) and let it cool for 15 mins. If the problem still exists, please try to contact us here: https://www.smoktech.com/support.