Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting. The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale.
Full Answer
How to fill a vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming. How to fill a vape pen? Please wait 5 minutes for the e-liquid to soak into the coil completely. The above procedure is not the only way to load the tank of your vape pen.
How do vape pens turn on and off?
Some vape pen models come with activation buttons. These offer control over the temperature of the vapor. Most vape pens that have buttons require five clicks to turn them on, three clicks to adjust the heat setting and five clicks to switch them off.
How do I know if my vape pen is charged?
How do you know when a vape pen is charged? Your vape pen will have a light indicator on the LED to let you know what the battery needs. The low battery signals with a red light or flashing white light (depending on the model), meaning you need to charge it.
Should you buy a vape pen with an activation button?
The advantage of activation buttons is that they offer more control over temperature. Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit.
How do I change my DAB pen to blue?
Charge battery before use: push or twist the charger into the pen to secure pieces together.Turn the unit on or off by pressing the button 5 times rapidly.To Change Voltage (vape battery has 3 temps – Low: green I Medium: blue I High: red): Clicking button 3 times quickly.More items...
Why is my vape pen light white?
Check the Vape Pen Connection. When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging.
How do you change the color of your vape pen?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting.
What do the lights mean on my vape pen?
Vape Pen Light Meaning A good rule of thumb is that the light color is likely an indicator for heat or voltage setting. And the number of blinks is usually an indicator of something else, like a battery in need of a charge, a burnt-out coil, or anything a manufacturer wants to program into the PCB chip.
What does flashing white light mean?
If you see a white flashing light, the police may be using it as a warning but are more likely to be trying to identify a particular vehicle or to illuminate your vehicle or one in your vicinity, and you do not need to stop or pull over unless they use their tactical blue and red lights.
What color do vape pens turn when charged?
greenThe light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
What does blue light on vape pen mean?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
How do I change my vape settings?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How do I adjust my vape settings?
1:503:08However if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do I reset my ooze pen?
If you have an Ooze battery, press the button five times fast within two seconds, without pausing between clicks. If your battery is on, pressing the button will illuminate a light around the button and power the atomizer.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
Why is my vape blinking different colors?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.