You can identify a coil head that’s intended for DL vaping by looking at the diameter of the coil inside. The wide bore of a DL coil allows for maximum airflow, vapour production and heat dissipation. Generally speaking, DL coils have a recommended power output of 40W and above.
Full Answer
How to choose the right replacement vape coils?
When choosing the right replacement vape coil, resistance is key. Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
What determines the resistance of a vape coil?
The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
How do vape coils work?
It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs the e-liquid held in your vape tank.
What size wire do I need for a vape coil?
The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be. We recommend using some basic 26-gauge Kanthal for your first few vape coil builds. It will fit fine in most atomizers and it’s very easy to work with.
How do I know what coil to use in my vape?
The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You'd then measure this resistance with the help of an Ohmmeter. Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current.
Do coils fit any vape?
If the tank uses the coil in one category, it is generally possible to use any other coil in that category. i.e. SMOK Baby Beast uses TFV8 coils Baby, so it is compatible with any other coil in the small category.
What does the coil number mean on a vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What do the different size coils do vape?
The size of your coil affects how much e-liquid can be absorbed at any given time, as well as the space between the wick and the outer structure, which actually plays a huge role in various aspects of your vaping experience.
Are vape coils universal?
Unfortunately, vape coils are not universal and every coil won't work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What is the best wattage for a 0.4 ohm coil?
23 - 28 wattFor example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What is the best wattage for a 1.2 ohm coil?
between 10-12 wattsA 1.2ohm coil is perfect for mouth-to-lung vaping and performs especially well when paired with the elongated drip tip option and used between 10-12 watts. A second coil is rated at 0.4ohm and provides a loose, airy draw which mimics that of a sub ohm device.
What's the difference between 0.2 and 0.4 ohm coil?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
What is the difference between 0.8 and 1.2 ohm coil?
They are both suitable for MTL (mouth-to-lung), which is very rare, with the only difference being that the 0.8Ω puts out warmer vapor than the 1.2Ω coil. The pods hold 2ml of e-liquid and attach to the battery section via a pair of powerful magnets, and feature top filling.
What is the best wattage for a 0.3 ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is the best wattage for a 0.2 ohm coil?
0.2 ohm coils - 40 watts to 100 watts.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
How to know when to change vape coil?
1. Experiencing a "Burnt" Taste in Your Mouth.
How long do vape coils last?
If you vape a lot, your vape coils may only last about 5-7 days. If you vape occasionally, it may last you a few weeks. And finally, if you're a really light vaper you could probably only change out your coils once a month or less.
Why does vaping taste burnt?
When you're vaping with a coil that needs replacing, you'll experience a burnt taste no matter what e-juice you use or what modifications you try to change. Once you sense this unpleasant taste, you need to make sure to replace your coil really quickly to avoid damaging other parts of your vaping device.
What is the difference between a lower resistance coil and a higher resistance coil?
Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
Why do I have fewer clouds when I vape?
If you're noticing fewer clouds than usual, it's likely due to a bad coil. Fewer vapors affect your satisfaction level and rhythm you have while vaping so you will be able to notice this right away. Change the coil and this issue will likely go away instantly.
Do vape coils last forever?
Regardless of if you're a first-time vaper or more advanced, the time will come when you need to replace your vape coil. Unfortunately, they don't last forever and they need replacing quite frequently. The coil is ultimately responsible for heating the e-liquid and turning them into vapors for your pleasure.
Can an e-cigarette leak?
Oh no, no one wants a leaky e-cig! If there's a coil in your e-cigarette that's lived in there a little too long, leaky conditions could be a sign that it needs to pack up and head out. If these leaks continue, they can potentially cause major problems in other parts of your e-cig.
What is the wire used in vape coils?
The standard wire used for vape coils is primarily made from Kanthal or Nichrome (which we’ll get into later). This wire is coiled (wrapped in a ‘coil’ shape) around a wicking material (which is usually made from cotton). When E Liquid is added to a vape tank, the wicking material inside the coil begins to soak up the E Liquid.
Why does my vape coil degrade?
The more continuously you vape, the faster the coils will degrade since the cotton doesn’t have time to saturate correctly, and the wire doesn’t have time to cool down.
What is Kanthal coil?
Kanthal is the most commonly used material in coils due to it’s exceptionally fast heating time and high maximum heat absorption. Kanthal is made from Aluminium, Chromium and Iron which makes it extremely malleable too. This makes creating the coils much easier, which is another reason it’s preferred by manufacturers, and why it’s so popular with vapers who make their own coils. Kanthal coils should only be used in wattage mode, not temperature control.
Why is E liquid thinner?
To combat this, thinner E Liquids are generally used to ensure the E Liquid is correctly vaporised at the lower temperatures and doesn’t “gunk” up the coil too quickly.
How to avoid flooding a coil?
To avoid flooding a coil, make sure you use the recommended temperature/wattage to ensure all the E Liquid is vaporised when you activate the mod. If your wattage/temperature is too low, the E Liquid won’t be vaporised correctly leading to the coil becoming oversaturated and flooded.
How long does a stainless steel coil last?
Their durability is really where they shine through however, according to various reports, when cared for correctly a well made stainless steel coil could last more than 20 years.
What is the resistance of a coil?
The resistance of a coil is pretty much what it sounds like, it refers to how much the coil resists the electrical charge sent from the battery. Coils with a higher resistance require less power to heat up than coil’s with a lower resistance. Electrical resistance is measured in a value called Ohms (Ω).
How to choose a vape coil?
Unfortunately, vape coils are not universal and every coil won’t work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: 1 Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices. When purchasing new vape replacement coils, look for options from the same brand as the device that you are using. 2 Consider The Resistance - Most lines of vape coils come in several resistance level choices to help you achieve the best experience. Coil manufacturers typically list which wattage range is ideal for the particular resistance levels of their vape coils. Before purchasing new coils, consider which wattage you typically vape at and purchase a coil that is ideal for that wattage range. 3 Check Recommendations - At Vaping.com, we make it easy to pick the best vape coils. Not only do we explicitly state which devices our coils are compatible with, we also list the best wattage range; eliminating the need to guess and allowing you to make the best choice!
What is a vape coil?
Vape coils are used to heat your vape juice and create vapor. Atomizers are relatively simple in construction - typically consisting of just a coil that is wrapped in wicking material (which absorbs e-liquid). When a device is activated for use, vape coils draw power from the battery to produce heat and vaporize e-liquid or nicotine salts.
Why won't my vape coil fire?
Likely, it may not be screwed in evenly. Empty your tank and unscrew your vapor coil. Screw it back in, ensuring that it is screwed in evenly.
Why does vape juice taste burnt?
Vape Juice Tastes Burnt After New Vape Coil Is Installed: This likely means that you have burned out the coil by taking a dry pull from your vape device. The coil will likely still work, but this will affect the taste of your vape juice until it is replaced.
Can you build your own vapor coils?
Some people choose to build their own vapor coils, but if you prefer not to, vaping.com provides a wide selection of high-quality pre-made coils. For those who want to create their own coil builds, rebuildable atomizers give vapers the flexibility to build their coils however they choose.
Is vape coil universal?
Unfortunately, vape coils are not universal and every coil won’t work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices.
How to wrap a coil?
To wrap a coil, you’ll need either a drill bit, a screwdriver or (ideally!) a coil jig to wrap the wire around. The size of whatever you use dictates the inner coil diameter.
What type of wire is used for variable wattage?
Kanthal A1 and Nichrome N80 are the two types of wire used for Variable Wattage mode only. Stainless Steel (316) can be used in either Variable Wattage or Temperature Control (TC) mode.
How Do Vape Coils Work?
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo… - DL/”direct-to-lung” coil
DL or “direct-to-lung” coils are designed to accommodate high power, large airflow and massive vapour production. These days, most DL coils use strips of mesh instead of traditional round wire. You can identify a coil head that’s intended for DL vaping by looking at the diameter of the coil in…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …