The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points. Take the pod out of your pod vape and check the bottom of the pod for any dirt or ejuice. Also check inside your vape where the pod attaches to it.
- Try Another Tank/Mod.
- Clean Your Contact Points.
- Check the 510 Pin on your Tank. If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error. ...
- Check the 510 Connector on your Mod. ...
- Reseat Your Coil.
Why does my vape say check atomizer?
Why Does My Vape Mod Say Check Atomizer or Is This a New Coil? Check atomizer is usually because the coil is not screwed in tightly enough or because the fir...
What does check atomizer mean on a vape?
“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
How to fix 'check atomizer'?
How to Fix Check Atomizer/No Atomizer On Your Vape Mod. How to Fix Check Atomizer/No Atomizer with a Vape Tank 1. Try Another Tank/Mod. This is the best way to know if there’s truly a problem. If you have another tank handy, you can try doing a switch. Take the tank off of your current mod and replace it with another tank.
How to fix a No atomizer message on your vape?
This guide will give you all the tips you need to fix this message
- Try another vape tank or vape mod. ...
- Check your vape coil. ...
- 510 connections on your e-cig. ...
- Clean the 510 connection on your vape mod. ...
- Clean the 510 connection on your vape tank. ...
- Check the 510 connection on your tank. ...
- Check the 510 connection on your vape mod. ...
How do I reset my vape atomizer?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I know if my atomizer is broken?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.
How do I fix my atomizer in my tank?
3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipMod. If you've done the first test and another tank on your vape mod is showing the same. MessageMoreMod. If you've done the first test and another tank on your vape mod is showing the same. Message this would indicate that the problem is with your e-cig battery or your mod. The chances are this is
Why does my vape not atomizer?
If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
How long does a vape atomizer last?
A new coil should last between one to two weeks. However, most e-liquids leave a thin film of residue when they are vaporized.
How long do atomizer coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
What part of the vape is the atomizer?
A vape pen atomizer is the heating element that converts the cannabis e-liquid (or other concentrates) into an inhalable vapor. However, 'atomizer' is typically an umbrella term. It describes the unit that holds the e-coils (heaters) and the wick. The wick delivers the e-liquid to the coils, where it is heated.
How long do Clearomizers last?
between one and four weeksA clearomizer/tank with a non-replaceable coil head can last from anywhere between one and four weeks (depending on frequency of use and type of e-liquid used). After this period, the coil within it will generally burn out and will need replacing.
How do I know if my vape tank is bad?
Flavor is Weak Maybe it will taste weak, or perhaps it'll have a burnt taste. Either way, if you feel like no matter which e-juice you purchase, you aren't getting a great taste, consider the fact that it's time to buy a new tank.
How do I fix my vape atomizer short?
Use these steps to troubleshoot a “Check Atomizer” error.Remove the tank from your mod. Has e-liquid leaked into the mod's threading? ... Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank. ... Replace the atomizer coil.
Is an atomizer a coil?
The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.
Why is my vape flashing and not working?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
