Why does my vape say “check atomizer?
All vapers will experience this problem at some point in their journey, and it can happen suddenly and without any apparent cause. Thankfully, while a bit frustrating, this is an easy problem to fix. “Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly.
How often should you change your vape atomiser?
How Often Should I Change It? Well, this is simply down to how long it lasts before showing any of the symptoms above. This can vary based on how often you vape, but an atomiser can generally last from a couple of weeks to a couple of months. Keep an eye on these signs to see when yours needs replacing.
How do I troubleshoot a short circuit on my vaporizer?
A defective box mod (Corrupt variable wattage mods typically). Troubleshooting the issue begins with first identifying the root cause for the problem. It's a good idea to first start with the coil and then looked towards the batteries to see which area of the vaporizer is causing a short-circuit.
How to clean your vape?
Cleaning your vape isn’t difficult, and takes just a few moments of your day. Make a habit of using a clean, damp cloth to wipe down the vaporizer, paying special attention to small crevices and connection points. A cotton swab can be an excellent way to gently reach even the tiniest of spaces, where gunk and grime like to hang out.
How do I check the atomizer on my vape?
0:373:22How To Fix 'Check Atomizer' - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also ifMoreSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also if there is juice or dirt inside the 510. Then your device may not be able to read your tank or RDA.
Why won't my vape read the atomizer?
If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
How do I know if my atomizer is bad?
When Should I Replace My Atomizer?Burnt Flavor. A nasty burnt flavor is the biggest sign that your atomizer is at its end. ... Leakage. Most times leakage is caused by overloading the atomizer. ... Black Gunk. When an atomizer hasn't been cleaned regularly, black gunk may build up on or around the coil. ... Harsh Hits. ... Clogged Airflow.
Why is there no vapor coming out of my vape?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How do you clean an atomizer?
To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
How long does a vape atomizer last?
For heavy vapers, you can expect to replace your coil after 5 to 7 days; moderate vapers can estimate close to 2 weeks, and very light vapers (think a few hits per day) could have coils that last as long as three weeks.
How long do atomizer coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
When should I replace my atomizer coil?
Your Coil Is Used Up If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks. Whatever your vaping habits, though, you should consider e-cig Coil Replacement at least once a month.
What do you do if your vape isn't hitting?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you clean atomizer coils?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...
Why does my vape light up but not hit?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
1. Bad coil connection
If you are using a sub-ohm tank, then it is possible that your coil was inserted incorrectly, or it was just not tight enough. So simply re-insert it. Sometimes it’s just as simple as that!
2. You are creating a short
If you are using a rebuildable tank, make sure your build is not touching the cap or any other metal piece of the deck. Also make sure your coil is in good shape and there are no breaks.
3. You have a faulty tank or coil
Sometimes there is nothing wrong with your mod and the issue well might be in your tank. So try to screw a different atomizer in. If your mod is now able to fire the new atomizer, then you know who to blame! For sub-ohm tanks with pre-made coils, sometimes, you just get a bad coil. Try using a different one from the pack.
4. There is no connection
Clean the 510 thread of your mod and the 510 pin of your mod. Maybe there is just something stuck in between. If this does not work, maybe the lack of connection is related to your coil.
How to tell if a vape is malfunctioning?
One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.
What is the pin on a vape?
The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
How to prevent vaping issues?
Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
What tool to use to adjust vape pins?
However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.
How long does it take to read a vaporizer?
Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.
How to clean a tank when it is apart?
When your tank is apart, unscrew the coil from the base of the tank and clean the bottom of the coil where it screws into the tank and makes contact. You’ll also need to do the same to the tank, ie clean the area inside the tank where the coil sits. When clean and dry reinstall the coil and reassemble your tank.
Can you use a sub ohm battery on a mod?
Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.
What does it mean when your mod is low?
If that’s the case, check the resistance of your coil . Each mod will fire at a certain resistance range; if the resistance of your coil is lower than that, your mod will refuse to fire it.
Why is my mod not working?
Six reasons for your mod errors (and how to solve them) 1. Coils may have a short. It could be something as simple as a bad factory coil, a loose connection on your rebuildable , or the factory coil itself isn’t properly seated or missing an insulator. Also, some people may misjudge the size of their builds, causing their coil to touch ...
Why is my mod not connecting to the 510 pin?
It could be due to any number of reasons. Some are just poorly designed and fail with time, others are faulty and make it through quality control.
Why do atomizers use peek insulators?
Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.
What does "check atomizer" mean?
One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.
What is Vaping360?
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!
What to do if your coil doesn't work?
If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.
Why do vapers forget atomizer error messages?
They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.
Why does my vape pen leak?
There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.
Why does my mod say no atomizer?
However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.
What is 510 connection?
In short, a tank’s 510 connection is that little bit with threads that protrudes and is screwed onto a vaporizer. It has a little pin that’s movable and that carries the positive charge from the vaporizer to the atomizer. It’s that little pin that can go haywire sometimes, and fail to connect.
What does it mean when your chipset says no atomizer?
When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.
Why is there no atomizer on my 510?
The no atomizer or check atomizer often comes up when the electrode pin in 510 configuration is not pressed against the firing pin, when the prebuilt coil is not connecting inside the base of the 510 electrode, or when the RBA is not correctly connected to the deck.
What is the atomizer in vaping?
This is a component that makes up a vape or e cigarette. The atomizer is a crucial piece of a vaporizer and without this component almost no vaporizer would work.
Why do you need to take up a new coil?
If the coil is interacting with the internal structure of your vaporizer you may need to take up a new coil or rebuild the coil so that it doesn't have the same break. Make sure any coil replacement you get is the right size and this can prevent the chance that it will touch the deck or cap.
What is a check atomizer?
Check atomizer is also called No atomizer. Atomizer shorts are often displayed when a coil begins to short-circuit. Atomizer short warnings will completely disrupt energy that goes into the atomizer to preserve it. Seeing these atomizer errors should never keep you from using your vaporizer.
What is an e-cigarette atomizer?
E-cigarette atomizers are responsible for seeding e-juice mostly and not dry materials. These types of atomizers are often found between the mouthpiece in the tank and air responsible for heating up the E juice to output vapor through the mouthpiece.
Can you use preinstalled coils with a vape tank?
If you are using preinstalled coils with a vape tank, you'll need to make sure that the base of the coil is connected to the base of your tank.
Do you need to know all the technical terms for vaping?
There is a fair amount of technical information surrounding vaping, and it can sometimes feel a bit overwhelming especially with some of the terminology that people that vape often may use. It's very unlikely that you'll need to know all of the technical terms for vape components to use a vape successfully, but learning ...
What's in an Atomiser?
An atomiser is made up of three parts; the casing, the wire (coil) and the wicking material. The wire wraps around the wicking material in the shape of a coil and the ends of the wire connect to the casing where it makes contact with the battery. When you put e-liquid into the tank, the wicking material absorbs it and will become saturated.
How Do You Know When to Replace It?
Atomisers often die a slow, drawn-out death, which would be terrible if they could feel anything. Luckily, they're not alive (at least we don't think they are...) so this isn't such a tragedy, it just means that it's easier to tell when your atomiser needs replacing. Here are some of the tell-tale signs it's on its last legs:
How Often Should I Change It?
Well, this is simply down to how long it lasts before showing any of the symptoms above. This can vary based on how often you vape, but an atomiser can generally last from a couple of weeks to a couple of months. Keep an eye on these signs to see when yours needs replacing.