Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current. The resistance of the coil element will determine which type of e-liquid to vape. Despite being so integral, the coil is a fairly simple mechanism.
Full Answer
What coil should I use for my vape?
Top 3 Benefits of Priming
- Enhances Flavor Failure to prime your new coil will result in a burnt taste. ...
- Helps Your Coil Last Longer Compared to coils that have not been primed, the primed ones last longer because the priming process lets the materials within the coil to ...
- Improves Performance
How to put a coil in a vape?
Replaceable coils
- Soak your vape coil in ethanol, vinegar, or other cleaning agents for a couple of hours
- Rinse it with running tap water
- Rinse it again, but with distilled water
- Expose the open side of the coil with air to force the water out
- Let it dry until all droplets have evaporated
How much does a coil cost for a vape?
Vape coils are an inexpensive but essential part of the vaping process. Vape Store offers vape coils priced from $1.75 for the Innokin T18/T22 Prism Replacement Coil to $4.99 for the Innokin EQ Pod, which is a refillable cartridge featuring a pre-installed Plexus coil.
What are the best vaping coils?
Vandy Vape Wire
- Geekvape Wire. Geekvape are known for their high-quality, ultra-durable mods like the Aegis Legend and their vape wire is no different.
- Vandy Vape Wire. Vandy Vape wire is some of the easiest vape wire to build with. ...
- Wotofo Wire. Wotofo wire is great to build with; it’s definitely some of the best vape wire that you can get. ...
- Coilology. ...
- Coil Master. ...
What are the differences in vape coils?
The difference between the two is the resistance and the method of vaping you use - standard coils have a higher resistance meaning less charge and juice pass through them, Sub Ohm coils have a lower resistance, less than 1.0ohms, meaning more current can go through.
How do I choose a coil for my vape?
0:533:40Which Coil Should You Choose? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the hotter it will fire more heat will create more vapor and produce more flavour. However theMoreAnd the hotter it will fire more heat will create more vapor and produce more flavour. However the more heat and a coil the less time it will last before needing to be replaced.
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What type of vape coil is best?
Kanthal. This is the most common wire type, but is actually a trade name. This is an alloy of three different metals and works really well as a vape coil.
What's the difference between 0.6 and 1.4 coil?
Nord 0.6Ω mesh coil and 1.4Ω regular coil. The 0.6Ω mesh coil is specially designed for sub-ohm vaping, it has a large mesh inside, with which you can get faster heating process and massive vapour clouds; and the 1.4Ω regular coil is designed for MTL vaping, you can enjoy throat hit with it.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
Is 1.4 coil for salt Nic?
Most pod mod vapers find that somewhere between 1.0 and 1.4 ohms is the sweet spot when it comes to 50mg salt nic e-liquids. In most cases, anything lower will result in a burnt taste and harsh sensation, and anything higher will produce very little vapor, not to mention a weak nicotine hit.
How many watts can a 0.4 ohm coil?
For example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What ohm coil is best?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
What coils make the most vapor?
It features mesh coils, but specifically “fan” mesh coils, and this drastically improves the vapour production from the tank. Mesh coils are basically strips of metal with holes punched throughout them, a bit more like a cheese grater than what you might picture when you think of mesh.
What coils for salt Nic?
1.0ohmMost Nic Salt e-liquids will typically be available in high strengths only, most commonly 11 and 20mg. As such it is recommended that you try to use a device with a coil rating of 1.0ohm or higher.
What is the difference between 0.8 and 1.0 coil?
These coils are available as two variants: 0.8 Ohm mesh coil & 1.0 Ohm standard MTL coil. The 0.8 Ohm mesh coils produce more vapour, providing a restricted DTL (Direct To Lung) inhale. The standard 1.0 Ohm coils deliver a longer lasting MTL (Mouth To Lung) vape.
What is a vape coil?
So what is a vape coil? It’s a piece of resistance wire which was composed in the shape of a spring. It can be made from various metals, including stainless steel, nickel-chrome, titanium, and Kanthal. Vape coils are contained inside the atomizer, along with a wick, and together they help to produce the vapor.
How it works?
Of course, the coils need additional elements to work their magic. That is why another essential component found inside the atomizer is a wick. It is made from material, usually cotton, which helps with absorption. In some models, it encircles the coil, and in others, it is inserted through it.
High and low resistance coils
Of course, in the stores, we will find different types of vape coils – some have high resistance and some low. What is the difference? The first type usually has resistance above 1.0 ohm and requires lower power. As a result, it uses less vape juice and produces smaller clouds of vapor. It is the perfect choice for most types of e-cigarettes.
When to change the coil?
Now that we know how vape coils work, it’s easy to note that thanks to high temperatures, they can burn out. If that happens, coils should be changed. When should you replace it? In most cases, you will be able to taste it! Your e-juice will start to lose its flavor and can taste a little bit burnt. It also may feel much drier.
How do vape coils work?
Vape coils are very similar to a regular atomizer coil, the wire is heated up by the battery and begins to vaporize your e-liquid. This creates a little hotspot where all the delicious flavor is produced. As the coils heat up, the coil acts as a magnet. These coils also produce more clouds when you inhale, so it is recommended to get coils that are stronger than average and have a larger gauge of wire in them. The sizing of these coils is usually based on the type of vaporizer you use they can be used for almost every type of atomizer.
What is a vape coil?
A vape coil is simply a piece of wire wrapped around a wicking material which is most commonly organic cotton. The wire wraps are usually spaced out with little pieces of silica wick (glass) to ensure the coils heat up evenly. Vape coils are usually found inside vaporizers or e-cigarettes but there have been a few cases of advanced vapers making coils for a mod like atomizers and drippers.
What is the difference between a steam atomizer and a vapor coil?
The word “atomizer” has been tossed around and abused so often that even experts are not so sure of its true meaning.#N#One thing is certain: an atomizer is a device that generates steam, while a vapor coil is an element that heats the inside. One of the easiest to use sub-ohm steam tanks is made for evaporation, so steamers can enjoy massive steam production and perform the “ vape trick .” The steam drips into the tank and the coil heats it up with the heat of the evaporator.
Why do vape coils change?
One reason is that when your vaporizer or mod battery is drained, less power will be sent to the coil so it will have to work harder and heat up more. This adds resistance to your coil and makes it harder for your e-liquid to get heated up. It’s always best to change your coil when it is less than half-full of e-liquid, that way you can get the most out of your juice. You will want to change your coils when they are fully used up as opposed to fully charged.
How do RDA devices work?
With RDA devices, you have to build a coil and inhale the vapor directly from it instead of inhaling the vapor directly. When using these coils, they should be dosed with e-liquid to ensure that they work properly so you know your device is heating and working as intended.#N#Vape coils are one of those devices that give you a feeling that is much more like smoking cigarettes without the smoke. They are often the perfect choice for smokers that want to quit or those that want to try an alternative to smoking cigarettes.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What Are Vape Coils?
Vape coils are one of the most critical components in atomizers. They are a crucial part of the vaping experience; one can even say they are the heart of the experience. Vape coils are technically atomizer coils, and they are housed within a vape tank.
Coil Resistance
Coil resistance refers to the amount of electrical resistance your coil has depending on the ohm of your atomizer head. Atomizer heads are what convert the electrical energy from the batteries into heat which vaporizes the e-cigs. The electrical resistance value that atomizer heads have is measured in ohms.
Types of Vaping Coil Wires
There are many different types of coil wires, and they can be made from various materials. Each material vapes differently, and how you use them or the type of e-cig you can use the wires varies from the various types of coil wires.
What is a Wire Gauge
A wire gauge found in vape coils refers to the thickness of the metal used to create a coil. A wire gauge is displayed as a numerical value and means the diameter of the wire.
Vape Coils and Vape Tanks
Vape tanks come in two main types, and they cater to different coil types. The two types of tanks are high resistance and sub-ohm.
Types of Vaping Coils
Now we come to an important question: what are the different types of vape coils? Well, there are multiple different types of coils for vape. Each type has a different vaping experience, and your choice of the coil will depend on what vaping experience you are looking for.
How Long do Vape Coils Last
Vape coils typically last for two weeks. Other factors like the type of coil, the power you use, and the type of e-liquid you vape can also affect the amount of time a coil lasts. The different types of coils for vape used can also determine their durability. Other factors include:
What is a vape coil?
What are vape coils? A vape coil is an arrangement of small parts designed to absorb and atomise e-liquid. You start with a small heating element, usually a curl of kanthal wire. This element is packed in dense cotton, which is then all housed inside a steel casing with wicking ports lining the exterior.
How to change a vape coil?
Most commonly, changing a vape coil will involve unscrewing either the top or bottom of the tank to open it and then removing the coil.
Why can't I soak up new vape liquid?
They can no longer reliably soak up new e-liquid because they become sodden with sugary fluid, corrupting the flavour and severely limiting the flow of air which would have carried the cloud of vapour.
When did Aiden start vaping?
Aiden started vaping in 2012 and hasn’t looked back since. He has been working in the vape industry for 5 of those years, and now creates content on various channels covering a vast array of vaping topics.
Should I wash my vape coils?
Should I clean my vape coils? Washing a coil under a tap of cold water might seem clever, but you’re unlikely to remove any of the now burned-in vegetable glycerine, and even if you managed to, the coil would now contain impurities from the water which will affect the flavour of your vape even after drying.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What makes a vape warmer?
Warmer vapor and larger clouds are produced by low resistance coils while a cooler vape with less current is produced by high resistance. Despite its importance, the coil has a fairly simple mechanism. It is constructed from a coiled wire or a piece of mesh as well as wicking material (typically cotton).
What is dual coil atomizer?
Another new one are dual coil atomizers that use an equal amount of electricity to both coils, which help to lower the overall resistance. The dual coils use so much power, which begs the question “which battery do you need?” rather than “what tank do you need?”. With RDAs, there are different kinds of decks, some of which are equipped for dual or even triple coils which allows for better production of vapor.
What is nichrome vape?
Nichrome combines 80% Chromium and 20% Nickel, which allows it to heat up much faster compared to Kanthal, producing large amounts of cloud and providing a pleasant, warm vape. Nichrome is only used in wattage mode and Sub Ohm vapers love it because of this along with its quick ramp up time.
Can you make or mar your vape experience?
You can make or mar your vaping experience just by picking the right coil, which is why it’s important that you know what types there are, what their benefits are and the properties of each type. It will greatly help you by using this guide as a starting point, and then researching your coil before using it. Don’t forget to check if it is compatible with your vape pen or dry herb vaporizer device before using.
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …