6 Steps to Change Vape Juice
- Get the stuff ready
- Remove the tank. First, unscrew the tank from your device and dump any leftover e-juice. Be careful while doing this as you may harm the battery or coil.
- Clean the tank. Use soap water and clean the tank thoroughly, but carefully. ...
- Clean the coils. While you are waiting for your tank to dry, you will need to clean your vape coil . ...
- Fill the tank. Once the tank and coils are dried completely, proceed with filling it with the new e-juice that you are excited about.
- Reassemble the components. Put the tank and the coils back in place and fire it. ...
How to change vape juice and clean the glass tank?
How to change vape juice and clean the glass tank. When you are changing vape juice in a vape tank, it is a good idea to rinse out the tank with warm water. You don’t want the water to get into the base of the tank so make sure to separate the tank components and just rinse out the glass part! After rinsing, dab it dry with some paper towel.
How do I change the flavor of my vape juice?
Your best bet to enjoy the new flavor without tasting any residual flavor from your previous vape juice is to change the coils. Empty the tank and rinse it out. Put in a new coil. Prime it with the vape juice you are changing to. Assemble the tank. Fill the tank and wait five minutes. Enjoy vaping your new flavor! I know this happens.
Should you change coils when you change vape juice?
If you are going to change vape juice and swap out a coil with no intention of ever using that juice again, then you might have to sacrifice a coil. The other option is to just keep vaping the new flavor on the same coil. The residual flavor may never completely go away but it will dissipate over time.
How to change vape juice with an RTA?
How to change vape juice with an RTA or RBA is the same as an RDA. Take out the existing cotton and set your mod to 15 watts to burn off any residual e-juice. Wait 15 minutes for the atomizer and base to cool. Remove the atomizer base from your vape mod and insert a new strip of fresh cotton wick.
How do I change the liquid in my vape tank?
First, you need to unscrew your tank from the battery and take out the old e-liquid. Don't forget to detach the tank from the atomiser or coil head as well. Next, remove any gunk that may have formed on the sides of the tank (this is particularly common with sub ohm tanks that use VG-heavy e-liquids).
Can I change juice without changing coil?
Since the coil is where the juice gets burned, residual traces of flavor accumulate inside the vape coils. If you want a complete refresh of flavor, changing your coils is a must. If you use RDA or RBA with a custom coil build, all you have to do is change your cotton wick.
Is it OK to leave juice in a vape tank?
You should realistically not leave the juice for more than 5 days. At this point, it will usually have been too long and start to taste awful. If you leave a tank un-vaped for too long, the coil floods and starts to leak. By how much and how soon depends on the tank/coil.
How do you get the juice out of a vape pod?
Let's learn more about how to clean your dirty vape pods.Fill a large bowl with very hot water. ... Open your vape pod's filling hole. ... Swish the pod and coil in the water to provide agitation and break up the residue. ... Empty the bowl and refill it with more hot water. ... Remove the pod and coil from the water.
How long do vape coils last?
4 days to 1 weekOn average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
How many puffs of vape is equal to a cigarette?
When we transfer it into puffs on average, it means that you will have to take 500 hits of vape to smoke as much nicotine as you would with a single cigarette.
How long should you wait between puffs on a vape?
15 to 30 secondsDon't Chain Vape You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait. In this case, you can buy e-juice with a higher nicotine level.
How often should you change vape juice?
For Moderate or Light Vapers A moderate vaper should change his/her coils every fortnight. As for light vapers, those who vape sporadically, there is no pressure on your coil so you could get away with a change every 3 or 4 weeks.
How often should I clean my vape tank?
Signs It's Time to Clean the Vape Tank For heavy vapers, it's best to clean your vape tank once a week with a quick rinse. For moderate vapers, clean at least once every two weeks. This is about the same frequency that experts recommend replacing the coil, about every two weeks.
When should I replace my vape pod?
Knowing When to Change Your Vape PodYou Get a Burnt or Stale Taste. The most obvious sign that it's time to change your vape pod is if you take a puff and you get a burnt or stale taste. ... Your Vape Juice Looks Darker. ... Dry Hits and Less Vapour Production. ... Little or No Flavour. ... Visible Build Up on Your Coil.
How can I fix a burnt pod?
It's quick and easy to do:Take your new coil and apply 3-4 drops of your e-liquid directly to the wick.Set aside and wait for roughly 10 minutes.Screw the coil on to your device.Fill your tank with your chosen e-liquid and screw it on to your vape.More items...
How to change vape juice in RDA coil?
How to change vape juice in an RDA is really easy. All you need to do is swap out the cotton. Before changing vape juice in a RDA coil build, you have to get rid of the old cotton wick. The former flavor will still be there and mix with the new vape juice unless you totally get rid of the old wick. When you pull out the old wick, you will notice ...
How long to cool a vape mod?
Take out the existing cotton and set your mod to 15 watts to burn off any residual e-juice. Wait 15 minutes for the atomizer and base to cool. Remove the atomizer base from your vape mod and insert a new strip of fresh cotton wick. Before assembling the RTA cap or vape tank, rinse out the cap or tank with warm water.
What is an RBA vape?
An RBA, or rebuildable atomizer, is a component of a vape tank that allows the vaper to switch from pre-built coils to a rebuildable deck. So you can do both, either use pre-built coils or build your own. Tanks like the Smok TFV8 and TFV12 are examples.
What is an RDA atomizer?
An RDA is a rebuildable drip atomizer. This is a vape device with an atomizer deck to build your own coils on. There is no tank that contains a reservoir e-liquid. Instead, e-liquid is dripped directly onto the wick and atomizer as needed. After every few vapes you drip on some new e-juice. It seems like a hassle to always be dripping new vape juice onto the atomizer but dripper's love it.
How to get rid of cotton residue on coils?
Do this by setting your mod to 15 watts, that’s all that is required. A few three second atomizer firings should do it. Wait at least 15 minutes so the base and coils cool. Then remove the base from the mod.
Do you taste the old flavor of vape juice?
The new flavor will be prominent but you will taste traces of the old flavor. The old flavor should fade away after a while but the residual taste of the previous vape juice flavor may remain for the duration of the coil's lifespan. If you don’t want any trace of the previous flavor, you will need to swap coils and rinse out ...
Can you throw away a coil?
If you have only been vaping on a coil for a few days and want to switch flavors, you don't want to throw away a perfectly good coil, right? No! And you don’t have to. Store it in a sealed sandwich bag until you go back vaping whatever flavor you were using with it.
How to add liquid to a tank?
Unscrew the top of the tank to add your liquid until it reaches the tank’s fill line.
How to keep vapes from tasting bad?
At the end of the day, the best way to keep your vape functioning well and your vapor tasting right is proper maintenance. Not doing so can result in wasted cash on contaminated juice, and likewise leave a bad taste in your mouth, literally. Just remember—water rinse between flavors, deep clean every few weeks, and you’ll be fine.
How long does it take for a vape to get dirty?
Without this maintenance, your vape could end up dirty and gunky in a matter of weeks creating weird mixed flavors, a burnt aftertaste, and possibly even malfunctions.
What is a water rinse?
A water rinse is the standard way of cleaning a vape tank. It is a quick-clean ideal for use before flavor changes. As a side note, while this method could hypothetically be done on the road, the need for water and a bit of drying time make it advantageous to time your water rinses for flavor changes when you’ll be at home, such as just before bed.
Why do you need to change your coils?
Coils are massively crucial in regards to having flavorful vapor. Also, the more you vape, the more frequently you’ll have to change the coil. Not changing the coil could result in a bad taste and a lot of money wasted. Pay close attention to your coil, so you never have to face this problem.
How to store eliquid?
This can lead to a decline in quality and possibly even early expiration. Within a glass container in the fridge is one of the best places to store your e-liquid.
Can you soak a vape tank overnight?
This can have the additional benefit of sanitation while likewise eliminating tough-to-clean stains. You can even leave your vape tank to soak overnight in alcohol in already-gunk-covered situations. Be aware though, that only metal or glass parts of your vape should be cleaned in this manner. Plastic can be damaged by alcohol soaks. You’ll also want to rinse said parts with warm water after an alcohol soak.
How to change flavor in vape tank?
How to Change Flavors in a Vape Tank. To clean your vape tank, unscrew it from the e-cig and pour any remaining juice out. Put a drop of dish soap inside and rinse the tank with hot water. The hot water and soap will help break up any oils and residue inside. Make sure to rinse well and wipe with a towel. Afterward, leave the tank to dry ...
What to do if you changed your coil last week?
What if you changed your coil last week and don't want to toss a newish coil? Simple, put that coil in a zip-lock bag labeled with the flavors name. Next time you decide to vape that flavor again, switch back to it.
Can you mix water with vape juice?
You don't want water mixing in with your juice. Note: when cleaning out your vape tank, make sure not to get water in the base of the tank, this means taking it apart to separate the tank components. We want to rinse out the glass part and not anything else. Once it's dry, refill with vape juice.
Do you have to change your coils for a vape?
Since the coil is where the juice gets burned, residual traces of flavor accumulate inside the vape coils. If you want a complete refresh of flavor, changing your coils is a must. If you use RDA or RBA with a custom coil build, all you have to do is change your cotton wick.
Why use a rebuildable atomizer?
Using a rebuildable atomizer brings loads of advantages. It allows you to save money by creating your own coils while enabling you to experiment with a wide range of unique coil configurations. Plus, this type of atomizer allows you to understand vaping technology on a whole new level .
Does an RTA atomizer have juice?
Because an RTA has a juice well, you’re going to need to put just a little more effort into ridding it of traces of e-liquid. Because this type of atomizer closely resembles a standard sub-ohm tank, the cleaning techniques aren’t that different.
How to clean a sub ohm e-liquid tank?
Next, remove any gunk that may have formed on the sides of the tank (this is particularly common with sub ohm tanks that use VG-heavy e-liquids). Rinse your tank thoroughly using warm water. ...
How to store vape coils?
In such a case, what you can do is remove and store the coil in a zip-lock bag which you should then label with the name of the flavour you were using it with. That way, next time you decide to vape the said flavour, you can just install it back.
Why does my vape taste bad?
Some Food for Thought. There are several reasons you could be getting a bad taste in your vape. In addition to the scenario we just described, a bad coil could be another reason your vape tastes weird. So is improper filling of your tank. Or you simply find you don’t like the flavour.
What is the most exciting thing about vaping?
One of the most exciting things about vaping is the smorgasbord of e-liquid flavours on offer.
How to clean a septic tank?
But confirm this from your user manual first to avoid the risk of damaging your tank. Once you are done cleaning, dab the tank with a paper towel or soft cloth to dry it.
Can you swap out e-liquid?
Unbeknownst to many new vapers, it is possible to swap out e-liquids without having to vape the whole tank. If you have an extra tank, it shouldn’t be a hassle as you can always use the extra tank. You can also avoid the tank hassle altogether by using a dripping atomiser. Otherwise, if you only have a single tank to work with, ...
Do you have to prime a coil after a coil change?
After making the coil change, don’t forget to prime it before you try out the new flavour.
d.weglarz13 Full Member
Hey again guys. I was wondering how I change juices in my tanks? Do i need to clean them with something first?
Baditude ECF Guru ECF Veteran
It depends upon the tanks you are using. It also depends upon the flavor of the juices.
wandawag Ultra Member Verified Member ECF Veteran
i have done both. i do rinse with hot water mostly between refills....makes it all fresh for the next flavor to come through. welcome to ecf. enjoy your vape .
Roastpork Full Member
i have done both. i do rinse with hot water mostly between refills....makes it all fresh for the next flavor to come through. welcome to ecf. enjoy your vape.
nikkysikk Moved On ECF Veteran
I have a clearomizer, a Vision nano, but I use it on my 510 batt. How do I dry burn with it? Do I just have to suffer through the burnt taste or is there another way?
Baditude ECF Guru ECF Veteran
I have a clearomizer, a Vision nano, but I use it on my 510 batt. How do I dry burn with it? Do I just have to suffer through the burnt taste or is there another way?
espio Full Member Verified Member
Generally I just vape what I can until I feel I'm getting to the limit of my tank/clearo/whatever.device.I.have.on, shake out the excess, refill, proceed.
