How to Fill The Clearomizer of the EVOD Vape Pen? Move your tank, ensuring that your mouthpiece is facing in the direction of the floor. After you have done this, begin to unscrew the base of your pen, ensuring that this is done in a counterclockwise motion. You can then begin to fill your tank with an e-liquid of your choice.
Full Answer
How to use the evod vape pen?
One trick is to flip your vape pen upside down so that the juice isn't flowing down into the atomizer. After you've got your device upside down, hold the button to fire your Kangertech EVOD battery and blow into the airflow holes, this will help shoot all the excess e …
How to fill evod vape pen clearomizer?
This is a metal post and a short wick on the thick metal ring. Set the battery and atomizer coil aside and turn the clearomizer tank upside down. Use the e juice eyedropper to fill the clearomizer tank from the sides, and be careful not to get e juice in …
How to fill a vape pen with liquid?
How do I Turn On my evod vaporizer?
How do you fill a EVOD vape pen?
0:060:51How To Fill A Kangertech EVOD - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
How do I open my EVOD vape pen?
The first thing you will need to do is charge up your EVOD vape pen. Simply unscrew the battery portion (the part with the button on it) from the wide metal ring that attaches it to the clearomizer tank. You should see a round area where the battery connects to the charger, with threading to screw the charger on.
How do you use the EVOD 4 in 1 vape pen?
1:184:57EVOD 4 IN 1 STARTER KIT INSTRUCTIONS FROM DIZNEY ...YouTubeStart of suggested clipEnd of suggested clipPut the globe on. And attach it to your battery. Then simply push the button five times again toMorePut the globe on. And attach it to your battery. Then simply push the button five times again to start it. And you push it one time and you're ready to go that's your wax tank.
How do you fill a vape pen for the first time?
Unscrew the mouthpiece of the vape pen. This will expose the opening in the cartridge. Fill the syringe with vape juice and inject it into the opening in the cartridge as many times as necessary to fill it. Screw back on the mouthpiece when the cartridge is full and you are ready to vape.
How do you use the EVOD dry herb pen?
0:074:38How to use your herbal attachement for your Vape Pen - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's actually really simple please follow my instructions and I'm pretty sure you will not have anyMoreIt's actually really simple please follow my instructions and I'm pretty sure you will not have any more issues a begin to turn on your vape.
Why is my EVOD pen not working?
Make sure it is turned on: If you are having issues charging your ego or evod battery, the first thing you want to do is make sure it is turned on. To do this press the power button 5 times in a row. You will want to press the button 5 times rapidly, in a rhythmic flow.
Why is my EVOD blinking 3 times?
The 3 flashes are supposed to mean that there is a short or the resistance is too low to safely fire (I don't think it will fire anything under 1ohm). In your case with it happening with every tank, it sounds like the center pin may be smashed down too far, causing it to short out.
How do EVOD work?
eVOD is a brand new video on demand platform allowing you to watch exclusive movies and shows - never seen before, and only available on eVOD. eVOD brings you hours of entertainment - from locally produced high-end dramas and movies, Afrikaans dramas, documentaries and so much more, there is something for everyone.
Is EVOD a good vape pen?
Apart from outstanding features like a strong and long-lasting battery, EVOD Vape Pen allows you as a vaper to enjoy an excellent flavor and dense vapor. If you have been looking for the best vape pens in the market, then look no further, as EVOD Vape Pen has it all.
How do you put liquid in a vape?
How to refill a vape podRemove the pod from the vape battery.Find the rubber bung that covers the fill port.Lift up this rubber bung to show the filling hole.Place the nozzle of your e-liquid bottle into the hole.Tilt the vape pod at a slight angle to prevent air pockets.Slowly fill the pod with e-liquid.More items...How to Refill an E-cigarette - A Guide for First Timers | Totally Wickedhttps://www.totallywicked-eliquid.co.uk › vape-guides › h...https://www.totallywicked-eliquid.co.uk › vape-guides › h...
How do buttonless vape pens work?
The button-less vape pen works by turning dials. It means there is no clicking of buttons. Instead, it automatically turns on when you inhale. Press the start button to activate the push-button model, and the device is on, producing a flavorful vapour that contains nicotine and the flavour of your choice.Buttonless Vape Pen Review. A Complete Review and Instruction ...https://www.upends.com › blogs › articles › buttonless-va...https://www.upends.com › blogs › articles › buttonless-va...
How much should I fill my vape?
Saturate your coil with one or two drops of e-liquid into each hole in the coil. This is important because it will prevent burning because the wick will already be saturated with e-liquid when you first inhale. Replace the coil and screw it back into the tank.How to Refill A Vape Tank - Vapourizhttps://www.vapouriz.co.uk › blog › vaping-guides › how...https://www.vapouriz.co.uk › blog › vaping-guides › how...
What is an evod vape?
The EVOD provides a similar experience to what we are used to with combustible cigarettes. The vapor production is slight, not over powering and won't choke you out, so it's easy vaping for beginners. These kinds of e cigarette starter kits are generally some of the most simple and easy to use as they only have one button to turn on/off and the same button is used to power the EVOD battery. In this article we are going to get you a little more familiarized with your Kangertech EVOD.
How to fill up a vape tank?
In order to fill up your vape tank, you need to take it off of the EVOD battery and remove the base of the tank. If you already have a little e liquid inside, you might want to do this upside down so that the remaining e liquid doesn't spill out and make a mess. Now that you have the base of the tank off, turn the tank upside down, ...
How to prime a new atomizer?
There are a couple different ways to prime your atomizer, one way to do so is before you fill up your tank, drip 3-5 drops of e liquid directly into the top of the atomizer and while that soaks in you can also add a drop onto each piece of wick you see poking out of the side of the atomizer. This method ensures that the atomizer is fully saturated before use but if you are in a hurry or don't have any e liquid with you besides what is in your tank, there is another way to prime.
How to change atomizer on Kangertech evod?
In order to change out your atomizer you first need to take the tank off of the Kangertech EVOD battery. Once you have the tank separated, remove the base of the tank to reveal the atomizer, if you have e liquid inside your tank you might want to do this with the tank upside down to prevent the e liquid from getting spilled. Now that your base is separated from the tank, grip onto and unscrew the atomizer. If you are unsure as to what the atomizer is, it is the small cylindrical metal tube sticking straight up from the base, you may want to review the other article on here titled, What is Vaping?: E Cigarette Vaping Basic's. With your atomizer removed you can now prime your new atomizer and reassemble your vape pen.
What coils are used for EVOD tanks?
Kangertech SOCC Coils for the EVOD Tank.
Can you over tighten an EVOD battery?
Finally, you want to make sure you're never over tightening anything. Not only is it a pain to get off if it's too tight but also over tightening can cause damage to the sealing rings and contact point on the EVOD battery. This could potentially ruin your battery causing you to get a new one, so always keep in mind that you only need things to be snug, you should be able to unscrew everything with just a couple fingers.
Why do I flip my vape pen upside down?
I'd recommend to flip the vape pen upside down for the duration of the trip when you're not using it, this keeps the e liquid from being pulled down through the atomizer and out of the bottom of the tank.
How to charge an evod vape pen?
Simply unscrew the battery portion (the part with the button on it) from the wide metal ring that attaches it to the clearomizer tank. You should see a round area where the battery connects to the charger, with threading to screw the charger on.
What happens when you take out an evod vape pen?
When you take your vape pen out, you will also see an extra liner in the box. If you pull that liner out, you will see a booklet of instructions on how to use and take care of your EVOD vape pen. The e juice bottle has, of course, e juice inside it; when you open it you will also notice that it has a bulb syringe dropper for easy filling ...
What are the parts of an EVOD starter kit?
All working parts on the EVOD Starter Kit. The working parts on the EVOD are the battery and the atomizer coil. The battery will last you for quite a while before it starts losing charge. The atomizer coil will probably need to be replaced after a few weeks, because the heating element itself will eventually wear out.
How to turn on EVOD?
To turn your EVOD on, push the button five times. The LED light on the button will flash three times, indicating that it has been turned on. You can turn it back off again by pushing the button 5 times, and this will keep it from accidentally activating in your pocket or your purse.
How to see e juice level on clearomizer?
To do this, you unscrew the clearomizer tank (the upper portion with clear slits where you can see the e juice level) from the wide metal ring attached to the battery. When you detach these two portions, you will see the atomizer coil portion of the clearomizer.
What does the green light on my evod pen mean?
The light will either show a solid red light or will flash between red and green while it is charging. When your EVOD battery is fully charged, the light will show solid green. At this point you can unscrew the battery from the charger and reattach it to the rest of your vape pen.
What is in the EVOD starter kit box?
When you open the package, you will find the EVOD Starter Kit box inside, along with a bottle of e juice. The EVOD box has your 2 EVOD vape pens inside it, fully assembled so that you can see how it goes together. When you take your vape pen out, you will also see an extra liner in the box.
What is an evod vape pen?
The EVOD Vape Pen is a great try to use electronic vaporizers for the first time. The vape pen provides a fantastic experience for both new as well as experienced users. Each unique part was specially designed in order to work flawlessly with one and other, eliminating any issues regarding compatibility.
How to clean evod atomizer?
To begin cleaning, you have to rinse out your coil with alcohol, preferably rubbing alcohol and leave it to dry for 24 hours. This will help to remove all residue and ensures the best results when switching your flavors around. You can also quickly clean your device with a simple rinse, although this is not as effective. If your coil begins to make a gurgling sound when it is being used, this is usually because your e-juice is getting into the atomizer coil and consequently causing it to flood. This can be simply cleaned by unscrewing the battery, placing a tissue on the bottom of your atomizer and simply blowing through your mouthpiece. This helps to clear out your coil and remove any e-juice that is left. Should there be any e-juice on your battery connector, this can be wiped off using tissue to ensure maximum efficiency.
What is the connector on an EVOD battery?
For ease of use, the battery uses a connector build using the same stainless steel. This helps to ensure that there is a safe connection for both the tank and the battery, with a strong flow of electricity. In addition, the connector itself makes use of 510 threading and eGo threading. By doing this, you have the ability to make use of your EVOD Battery alongside a range of tanks, rather than being restricted to the single tank.
How many mAh is a Kangertech EVOD battery?
The Kangertech EVOD Battery has a total capacity of 1100mAh which allows for longer use between each charge. The battery has an output of 3.7V and is specially designed for optimization with the atomizer coil. This allows for smooth, satisfying hits every time it is used. The battery has been expertly modified to produce 3.7V consistently, no matter how much battery is left.
What is an evod battery?
The EVOD Tank can be powered by a brand new, innovative EVOD Battery . Each shell of the battery is specially designed with a strengthened aluminum alloy, ensuring it is durable but also lightweight. The core features of the EVOD Battery make use of lithium-ion, advanced technology, a material that is significantly superior compared to traditional alkaline batteries. Each battery is colored so that it matches color of the EVOD Tanks for an all round smooth look.
Where is the coil on a Kangertech atomizer?
The Kangertech atomizer themselves make use of a unique coil design, with the coil being located at the bottom. This helps to guarantee that all of your wicks contain e-juice, no matter the level of liquid is still left within each tank itself. Each tank is designed for a simple refill so that they can easily be refilled by even the newest vapers. This means that you can quickly refill your tank, using any e-juice that is best suited to your preferences.
Can you use AIO vape pen with vape juice?
If you would like to begin vaping then this product is designed for you, it provides you with a quick yet simple base to build your experience from. The AIO vape pen includes all the components already installed for use with the vape juice of your choice. It can be easily used, refilled and recharged with ease. The tank refilling involves a stress free experience, that can be quickly completed without any hassle.
How to fill a vape pen?
Generally, you’re going to remove the cap to your vape pen and slowly, carefully begin put the oil inside. Some oil vape pens are going to be a little different than others depending on the layout of the design and different specs or features. Make sure you are looking at the product info before you purchase it.
What is a vape pen?
First things first, the term ‘vape pen’ is a bit generic. There are all kinds of vape pens. Some vape pens such as a dry herb vaporizer, wax pen, and oil pens (pre-filled and reusable, empty ones) and this will all affect how you fill your vape pen. Not to mention, not all vape pens have the same styles or features, ...
Can you overpack a vape pen?
In addition, you will want to make sure you don’t overpack your wax pen. This will cause it to strain and could contribute to the vape pen burning out, and in either case, over-packed coils will overflow when the wax bubbles-up from the heat produced by the coil.
How to use a dabber for vaping?
Use a dabber to load the wax coils but NEVER poke the coils directly and try to avoid contact at all costs. Just gently push the ball of wax towards the coil and the heat should do the rest while you are vaping. In addition, you will want to make sure you don’t overpack your wax pen.
Can you mix two different oils in a vape pen?
Not to mention the flavors might not taste good together and you may have wasted the vape oil.
Why is a glass globe vape pen more sensitive to damage?
For example, a glass globe vape pen might be more sensitive to damage because of the, well glass globe that can shatter if bumped the wrong way.
Do all vape pens have the same features?
Not to mention, not all vape pens have the same styles or features, and many will differ in how they are entirely set up to begin with, even if the most basic science behind them is the same. For example, when thinking about loading a wax pen vs a dry herb pen you have to keep a few things in mind.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to remove coil from vaporizer?
Remove the coil from the bottom. Unscrew the bottom metal piece of the vaporizer and set it aside. Then, slide the coil out from inside of the tank.
How to fill a e-liquid tank?
Fill the tank to the indicated line with e-liquid. Unscrew the top connecter from the tank to reveal the access points for the e-liquid. Then, hold the dropper part of your e-liquid bottle up against the inside of the tank. Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank, which indicates fullness.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...