Install the pod on the body, and remove the drip tip. After filling e-liquid from the filing hole, put the drip tip back on. Prime it for 10 minutes before use.
Full Answer
How does the Caliburn Koko vape work?
The Caliburn Koko vape features a simple, buttonless design. Unlike the other model of Caliburn, which had a power button to switch between manual and automatic modes, the Koko opts for an air-activated battery that has no on/off switch. The pods are draw-activated, so users need only take a hit to create vapor.
How to use an e-liquid vape?
After filling e-liquid from the filing hole, put the drip tip back on. Prime it for 10 minutes before use. Take a draw directly to vape. a. Install the coil to the pod. b. Install the pod on the body. c. Remove the drip tip. d.
Is the Koko vape vape system worth it?
The Koko could have had a higher battery capacity without compromising on its weight (it weighs in at 33g or barely one ounce). But, as it stands, the Koko is an excellent system for mouth-to-lung vapers who want a quick hit, once-in-a-while, of quality vapor.
How do I install a vape pod?
Take a draw directly to vape. a. Install the coil to the pod. b. Install the pod on the body. c. Remove the drip tip. d. Fill the e-liquid.
How to fill a pod?
What is a Koko Prime Kit?
What is Caliburn G Kit?
How many times does the green light on a vape stop?
What does the green light on a Type C charger mean?
How many times does a short circuit LED flash?
When installing a pod to a device, if the air inlet of the pod and the air inlet?
See 2 more
How do you use a Koko vape?
0:481:58UWELL Caliburn KOKO Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply insert the micro USB charge cable to the input port located at the base of the device andMoreSimply insert the micro USB charge cable to the input port located at the base of the device and then proceed to plug into a power source such as a laptop or games console to replace your pod.
How do you set up a Koko vape?
4:2411:45UWell Caliburn KoKo Prime - Customize Your POD! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd when you press the mouthpiece on make sure you hear that. Click. Or else it might pop off on youMoreAnd when you press the mouthpiece on make sure you hear that. Click. Or else it might pop off on you now that it's clicked and locked you could drop it in your device you could start vaping.
How long does it take for a Koko to charge?
40-45 minutesBattery Life & Charging The Koko Prime charges from completely dead to a full charge in 40-45 minutes.
How do you fill a Coco?
Filling the PodRemove the mouth piece and fill through one of the 2 fill holes either side of the centre hole.Squeeze your bottle until the pod is full with 2ml of liquid.Replace the mouth piece.Place the pod into the device pushing until it clicks.
Why is my caliburn Koko not hitting?
Usually when your Caliburn is not producing any vapor – wether you are just inhaling or using the button, it is most likely flooded. Remove the pod, and use a cotton swab to gently clean the bottom of the surface.
How do you know when caliburn Koko is fully charged?
There's an LED on the Caliburn Koko that lights up in three colors: green, blue and red. Green is full battery, blue is medium and red is low. When the Koko is out of the juice the LED will blink red.
Can you use Koko while charging?
The Caliburn Koko has a charge rate of 1A, which isn't stellar, but it's decent for an entry-level vaping device. I also features vape-while charging technology, which means you will be able to use it as a passthrough.
How long do Koko pods last?
about 1.5 to 2 weeksIt's well built and well designed, featuring a nice sturdy lanyard and cross-device compatibility with the Caliburn Pods. Since it comes with the Caliburn pods you already know the flavor is gonna be fantastic, and the pods last about 1.5 to 2 weeks so it's fairly economical as far as the pod cartridges go.
How long do Koko Vapes last?
Battery. The internal battery of the Koko AK2 is 520mah in size, just like the Caliburn A2, which is pretty small, but considering you are using a high resistance pod with it, you'll get a full day of vaping out of it easily. Plus it charges pretty quick due to the small battery size.
How do you refill a Koko vape flavor?
Stick the nozzle of your juice bottle into the red gasket to fill the pod. Fill the pod halfway and let it aside for 5 minutes to allow the cotton to absorb all of the e-juice. You can refill the 2ml e-liquid capacity of the Koko Prime vape device.
Is Koko vape good?
Uwell's Caliburn Koko Pod is a brilliant, compact and discreet pod that delivers great flavours with indirect inhalation. It's easy to use, practical, and almost perfect. For occasional vaping or when you're out and about, it is the best solid little pod right now.
Can I use regular vape juice in a caliburn Koko?
Vaping the Caliburn Koko The consistent power output of the battery ensures quality vapor production with every pull. The coil type also makes the pods compatible with different kinds of e-juice (freebase nicotine, nicotine salt) so users can use as many e-juices as they want with various nicotine levels.
How do I turn on caliburn Koko?
1:506:01The NEW Caliburn KOKO By Uwell! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd at the bottom you got your USB port. And ventilation holes at the top of the Coco is where theMoreAnd at the bottom you got your USB port. And ventilation holes at the top of the Coco is where the press-fit refillable pod is go ahead and pull that sucker out and at the bottom of the pod you're
How do you set up a vape pod?
How to set up a VapeStep 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you.Step 2 - Fill your tank or pod with e-liquid. ... Step 3 - Prime your coil / pod. ... Step 4 - Settings or no Settings? ... Step 5 - Set the correct output power. ... Step 6 - Take your first Vape.
Why is my caliburn blinking blue and not hitting?
If you are still getting a blinking blue light, it might also be because your vape pen is in a locked state. Press the indicator five times in rapid succession to exit lock mode, and you should be able to use your battery again. If it still isn't working, clean the contacts between the pod and the machine.
How do you prime a Koko Prime coil?
2:144:12How To Change Uwell Caliburn Coils [inc Koko] - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you simply just line up the fresh coil with the edges. Like you had before. And just push it inMoreAnd you simply just line up the fresh coil with the edges. Like you had before. And just push it in place there we go like that. See that's all in place.
Uwell koko prime not firing with constant green light : Vaping101
I have a uwell koko prime.....i bought it 2 months ago. It was working well with some leaking problems which at times become so problematic.... Now after two months i woke up and saw there was a constant green light on it and it was not on charge.
UWell KOKO prime Type C not working : electronic_cigarette - reddit
Just like the title says, I’ve got a bunch of other spare type-c cables lying around from Apple devices that just won’t charge my device - the only type-c cable that charges it is the the tiny 2 inch cable it came with.
Uwell Caliburn KOKO 11W Pod System $34.99 - Element Vape
Presenting the UWELL Caliburn KOKO Pod System, a finely crafted vaping pod system manufactured with a integrated 520mAh rechargeable battery, Caliburn pod compatibility, and can be concealed within the palm of the hand with ease. Constructed from high quality aluminium alloy, the chassis of the UWELL Caliburn KOKO is moderately impact resistant, safely housing the 520mAh rechargeable battery ...
How long does a Koko vape last?
Inside the square shaped KOKO Vape is a 520mAh battery which should last you three hours of heavy vaping. While the refillable pod can hold 2mL of your favorite e-liquid, whether it’s free base or nicotine salt, the choice is yours!
What is a Uwell mod?
Uwell. Uwell is a leading manufacturer of vape mods and tanks. It's one of the pioneers of todays vape industry, and it's most notable products are the legendary Uwell Crown Series sub-ohm tanks such as the – Crown, Crown II, Crown III and the latest the Uwell Crown IV (4). Check out Uwell's best products below:
How many cloud coins do you get for vaping?
Help fellow vapers choose the best product. Your opinion goes a long way. You will receive 10 Cloud Coins after each review which can be applied on your next purchase.
Is the Koko pod a must have?
Based on the original success of the original Caliburn, the KOKO Pod Vape is definitely a must have device for any type of vapor!
Does the Caliburn Koko come with a necklace?
This boxy shape fits perfectly in your pockets. Each Caliburn KOKO comes with a necklace if you prefer to hang it around your neck, as posed to stuffing your vapes in your pockets.
Is Koko rechargeable?
Furthermore the KOKO is rechargeable via a built in USB port , and comes with intelligent safety features such as:
Do you need a Vapeloft account to earn Moolah?
Oops. You need a vapeloft.com account to earn moolah.
How big is the Uwell Caliburn?
The original Uwell Caliburn is a slender, elongated device that stands at 110mm (4.3”) and has a single power/firing button on its aluminum alloy frame. The first version of the Caliburn also has a 520mAh battery with a top-loading pod. The pods also have a 2ml e-juice capacity and have the same coil types ...
How wide is the Caliburn Koko?
The Caliburn Koko pod mod is a smaller version of the original Uwell Caliburn that has a longer shape and stands at 110mm (4.3”). The Koko stands at 67mm (2.6”) and is 12mm (0.4”) wide, so it is very concealable and pocket-friendly. The outer chassis features lightweight aluminum alloy with plastic elements, so the device is durable without being too heavy.
What is a Caliburn Koko?
The Uwell Caliburn Koko is a pared-down version of the Caliburn pod mod system. The device is square-shaped and has a tiny, lightweight frame. The build features aluminum alloy and plastic with no buttons anywhere on the pod mod.
How many pods does a Koko kit have?
The Koko kit comes with two pods, one rated for 1.2ohms (red base), the other rated at 1.4ohms (black base). The 1.2ohm pod comes pre-installed. The pods have gold-plated contacts on the base, as well as two magnets to secure a connection with the battery section.
What is the coil rated for a Mico?
The Mico uses two pod types, however. Users can opt for a regular, MTL pod with a coil rated at 1.0ohms, or they can switch to a mesh-style coil that has a coil rated at 0.8ohms. The pods use side-fill ports with rubber stoppers to prevent leaking, and they also have magnetic connections like the Koko pods.
How many mAh is a Koko battery?
The Koko has an internal 520mAh battery, which is the same capacity as the first Caliburn cell. The Koko can output a maximum of 11W, while the voltage range goes from 3.2 – 4.0V.
What is the drip tip on a Pod?
The drip tip comes off, which is how users fill the pods with e juice. There is a barely visible fill-line marker on the outside of the pod to help guide users, although it is hard to see.
What is the ohm of a coil?
Every atomizer coil will have an ohm spec. If you remember anything from studying physics at school, you'll that an 'ohm' is a measure of resistance - the coil wire will have an electrical resistance which determines how much vapour and flavour you get from a puff. Sub-ohm vaping uses a coil with less than 1 ohm resistance to produce bigger vape clouds and more intense flavour hits.
What is a vape kit?
A vape kit is the ideal way to start vaping, and many regular vapers still purchase different kits as they get more curiours about the various facets of vaping. In 2017, newcomers really are spoiled for choice when it comes to choosing a starter kit, but most will contain the types of compenets (albeit with different specifications). The main components of your vape kit will be the tank, battery (part of the 'mod') and coil. These 3 elements and they way they work together will determine the type of vaping experience you'll have, and it's a great way to experiment and figure out what kind of vaper you're going to be.
What are the components of a vape kit?
The main components of your vape kit will be the tank, battery (part of the 'mod') and coil. These 3 elements and they way they work together will determine the type of vaping experience you'll have, and it's a great way to experiment and figure out what kind of vaper you're going to be.
What is a coil in vaping?
The co il - or atomizer - is an essential component. The coil wraps around the wick of your vaping device, heating it up when its wet to turn your juice into vapour. There are various different types of coil on the market all with different specifications. One of the main specs on a coil you'll see is its 'ohm' rating.
What happens if you don't clean your vape tank?
If your vape tank isn't kept clean, e-juice will likely build up over type and cause congestion and a bad taste. If you switch up your flavours regularly you'll run the risk of flavour 'ghosting' too - so always remember clean your vape tank. With the right vape kit, the sky really is the limit.
Can you vape without a tank?
No vape kit comes without a tank. Your vape tank is invaluable. Keep it clean and look after it, and you'll have a long and happy vaping career. Vape tanks vary in shape and size, but looking after them is largely the same. If you vape regularly be sure to clean your vape tank every 2 or 3 days with warm water or an ultrasonic cleaner.
Do vape kits come with a replacement coil?
Instead of replacing the entire coil head, shell, coil, wick and connective element, ...
Is There a Uwell Caliburn Pod Shortage?
One of the things you may have noticed if you’re a Uwell Caliburn owner is that the pods have become very difficult to find in the United States. You may have even seen rumblings of a potential Uwell Caliburn pod shortage on Reddit discussion groups. There are two causes for the short supply of Caliburn pods in the US.
How to clean a Caliburn pod?
Confirm that the pod has a good electrical connection with the device. Clean the contacts at the top of the Caliburn with a cotton swab. If the bottom of the pod is contaminated with dust and old e-liquid, clean it as well.
What was the first pod system to use a cotton wick?
In addition to the winning combination of price, size and performance, the main claim to fame of the Uwell Caliburn is that it was the first pod system to use a true tank-class coil with a cotton wick as opposed to the smaller coils with silica wicks that most pod systems use.
Why does my Uwell vape taste burnt?
One of the most unpleasant things that you can experience when vaping is a harsh burned taste, and the most common reason for a burned taste with the Uwell Caliburn is vaping too soon after filling the pod for the first time. The Caliburn pod has a cotton wick, and the wick can burn if you attempt to vape before the wick is completely wet. If that happens, you’ll never get a good flavor from that pod because there’s no fix for a burned wick. After you fill a new pod for the first time, wait at least five minutes before vaping.
Why isn't my Caliburn hitting?
The most likely reason why your Caliburn isn’t hitting is because the device is locked. Charge the battery fully. The device won’t produce vapor if the battery is dead. Confirm that the pod has a good electrical connection with the device. Clean the contacts at the top of the Caliburn with a cotton swab.
What is a Uwell Caliburn?
As we mentioned, the Uwell Caliburn is a pod system that, for many people, simply hits the sweet spot in terms of the great experience that you get relative to the small size of the device. The Caliburn is a bit larger than a device like the JUUL, but the tradeoff is that the Caliburn has more than double the battery life and more than double the pod capacity while still being incredibly easy to carry and to store just about anywhere.
Why does my e-liquid burn?
You’re using a heavily sweetened e-liquid, which causes coil gunk. Coil gunk – caused by sucralose residue – creates a strong caramelized sugar flavor that eventually leads to every puff tasting burned. If you use an e-liquid with less sweetener or no sweetener, your pods will last much longer.
How to fill a pod?
How to fill the pod#N#a. Install the coil to the pod.#N#b. Install the pod on the body.#N#c. Remove the drip tip.#N#d. Fill the e-liquid.#N#e. Put the drip tip back on.
What is a Koko Prime Kit?
KOKO Prime Kit is a top refilling pod system kit that is known as an upgraded version of Uwell KOKO. This post will teach you how to use it clearly.
What is Caliburn G Kit?
As you know, Caliburn G Kit is the upgrade version of Caliburn, and it will continue its high performance...
How many times does the green light on a vape stop?
After 8 seconds of vaping, the green light flashes 5 times to indicate the timeout and automatically stops the output.
What does the green light on a Type C charger mean?
It will flash red to indicated low battery, flash blue to indicate medium power, flash green to indicate sufficient power , and the green light stays on after charging is completed.
How many times does a short circuit LED flash?
When a short-circuit occurs, take a draw the LED will flash red 3 times to indicate a short-circuit and stop output.
When installing a pod to a device, if the air inlet of the pod and the air inlet?
When installing the pod to the device, if the air inlet of the pod and the air inlet of the device is close to each other, the airflow is suitable for restricted direct-to-lung vape.
