To fill the Cerberus tank, twist off the tank’s top metal hardware. You’ll see two semi-circular filling holes next to the tank’s centre air channel. Add e-liquid through either of the filling holes until the tank is nearly full.
Full Answer
What is geekvape Cerberus se tank?
An excellent vaping experience with more cares. Now with a childproof lock design and a lock-up base, protects you in a complete solution. Boosting bottom airflow system with new super-mesh series coil, a smooth cloud maker. Geekvape Cerberus SE Tank excels both in and out.
How much water does a Cerberus tank hold?
The Cerberus comes with bubble glass preinstalled, which holds a max of 5.5ml. The package also has a regular straight glass tank which holds 4ml. If you’re running this tank at high-wattage, which is really what it’s designed to do, you’ll probably want the extra capacity of the bubble glass. Putting the tank together is as easy as any other tank.
How do you put the Cerberus tank together?
Putting the tank together is as easy as any other tank. I did find that putting the glass onto the top cap section first works better than putting the glass on the deck first. But other than that, just screw in the coil and put everything back together and get to vaping. The Cerberus uses what Geekvape is calling a Super Mesh coil system.
What coil does the Cerberus sub-ohm tank use?
The Cerberus Sub-Ohm tank is able to access the Super Mesh Coil Line, utilizing offerings like the X1 coil, best rated for 60-80W. Vape Product Review: Geek Vape AEGIS MINI 80W Starter Kit from Element Vape on Vimeo.
How do you fill a Cerberus tank?
1:285:30How to replace a geekvape cerberus coil. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise.MoreAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise. The whole tank should come apart. So you pull the top off and then you can grab your glass.
How do you turn on a geek vape Cerberus?
Vaping with the Geek Vape Aegis Solo is as simple as holding the fire button and inhaling. If the device is in wattage mode, you can adjust the power by pressing the plus and minus buttons on the front of the device. To change vaping modes, press the fire button three times quickly to open the menu.
How do you fill a geek vape tank?
2:2910:09GeekVape P Subohm Tank - FINALLY, Something Different! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as you fill it it's gonna fill from the bottom all the way up to the top you're gonna get a fiveMoreSo as you fill it it's gonna fill from the bottom all the way up to the top you're gonna get a five mil juice capacity out of this tank uh the new airflow.
What coils fit the Cerberus tank?
The GeekVape Super Mesh Replacement Coils, available in 2 versatile options – a 0.2ohm X1 Coil or a 0.4 ohm X2 Coil.
Is the Cerberus tank good?
The flavor from prebuilt mesh coil heads have been amazing in every tank I've tried them in and this tank is no different. The flavor is crazy. In fact, this might be the best flavor I've gotten from a mesh tank yet. I can't believe how good the flavor is.
How do you open a geek vape?
To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery. The Geek Vape Aegis Solo won't operate if it doesn't have a solid electrical connection from the battery to the atomizer coil.
How do you prime a vape tank?
0:451:52Priming a vape coil in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto theMoreGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto the wicking material down the middle hole put your vape coil in your tank fill your tank with the liquid.
How do you use a vape tank?
Load the tankDisassemble Your Tank.Fill Dropper With e-liquid.Squeeze a drop of e-liquid into each cotton hole.Screw coil into airflow base.Fill tank but avoid the middle hole.Disperse e-liquid along the inside of the tank.Screw airflow base back onto tank with the battery end down.Wait for 5-10 minutes.More items...•
Why is my tank leaking juice?
Overfilling is an obvious one. Putting too much e-liquid into your tank or pod can cause it to leak. Too much e-liquid can cause the coil to become flooded or for e-liquid to leak past seals when replacing the cap. Many tanks have recommended fill levels to prevent leakage and other problems caused by overfilling.
How long does a Cerberus coil last?
1-2 weeksReplacement Coils for the GeekVape Cerberus Tank are available with a 0.2 ohm or 0.4 ohm resistance and are sold in packs of 5. Changing your coil regularly is the best way to keep the flavour in your device fresh. VapeMeet recommends changing your coil every 1-2 weeks.
Can you fix burnt coils?
Can you fix a burnt coil? Though burnt coils are best to be replaced as soon as possible, the good news is that you can get a little extra life from them whilst you wait for your new coils to arrive. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.
Do baby beast coils work in Cerberus tank?
Coils for the Cerberus tank, which are also compatible with the Smok Baby Beast and Vaporesso NRG tank.
Bottom fill vape tank vs top fill vape tank
Before we start a step-by-step guide, we should mention that there are two types of vape tanks, and their design has a pretty significant influence on the method we will use to refill the e-liquid. Of course, we’re talking about top fill vape tanks and bottom fill vape tanks.
Filling bottom fill vape tank
If your device fills from the bottom, you should check whether you need to completely empty the tank or if it’s possible to add e-liquid while some of it is still in the chamber. Of course, it’s always best to finish your current vape juice and give a tank a quick clean.
Filling top fill vape tank
This type of filling system is unquestionably the most popular one, and it’s no surprise as it’s quick and easy to work. It’s worth mentioning that top fill vape tanks may come in slightly different forms – they can have a screw-off top, twist off, or a sliding lid.
Cleaning the tank
It doesn’t matter if your vape tank is filled from top or bottom – it still needs to be cleaned from time to time. This habit will put a stop to a build-up of e-liquids in the chamber, so be sure to do it regularly. The moment when you’re about to refill your tank is the best one as the device is already empty.
What about a closed pod system?
We should also mention that there are tanks that weren’t even designed to be refilled! We’re talking about closed pod systems. These devices already come filled with vape juices, and when you finish it off, you should simply throw out the used pod and replace it with a new one.
GeekVape Cerberus Sub Ohm Vape Tank
The GEEKVAPE Cerberus sub-ohm tank provides excellent flavor delivery and fantastic cloud production.
Geek Vape Cerberus 25mm Sub-Ohm Tank Features
25mm Diameter 4mL eJuice Capacity 5.5mL Bubble Glass Superior Stainless Steel Construction Super Mesh Coil System 0.2ohm Super Mesh X1 Coil - Rated for 60-80W Compatible with TFV8 Baby Coils Threaded Top-Fill Design Dual Slotted Adjustable Bottom Airflow Control 510 Connection