Can I vape while my Cool Fire is charging?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
What is the difference between the coolfire IV and IV plus?
The new Coolfire IV Plus is marginally thicker and heavier than the original, but therefore boasts a larger battery capacity, higher max wattage and can fire down to a lower resistance. The Coolfire IV Plus has a nice 3300mAh battery vs the 2000mAh on the original.
How do I use the Cool Fire IV?
If you’re using it throughout the day, you can also lock the Cool Fire by pressing the power button 3 times. The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together.
Can You vape with the innokin coolfire 4?
The Innokin Coolfire 4 has a wide range of variable wattage, voltage and state-of-the-art safety features. You can also vape while charging. The Coolfire 4 features a 510 connection with a spring loaded pin, quality steel threading, and an enclosed ego adapter.
How do you charge a cool fire 4?
Before using the Cool Fire you must charge the battery for at least 4 hours (ignoring the charge indicator for the initial charge). In the box you'll find a Micro USB charger (DC 5V/1A) that you can use to charge your new device from a computer, or using a compatible plug adaptor.
How do I change my CoolFire IV to Watts?
To switch to watts, hold down the fire button at the same time with “+” button. If you want to enter Variable Voltage mode, hold the fire button and “-“ button down together.
What is the best tank for CoolFire IV?
Compatibility. The CoolFire IV vapes perfectly with the Innokin iSub Apex & iSub-G Sub Ohm tanks.
How do I change my innokin vape?
Should you wish to change the setting, hold either the "+ or -" button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required. The display will cycle from 6.0W to 40.0W (in 0.5 steps).
How do I change my vape from Volts to watts?
0:231:44How to Switch Between Voltage and Wattage Mode on an Eleaf iStick 50wYouTubeStart of suggested clipEnd of suggested clipIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it saysMoreIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it says it's whatever Watts sixteen point five so it's basically just making one more prominent than the other.
How do I change my cool fire IV TC100?
The CoolFireIV TC100 wattage can be adjusted from 6.0 to 100 watts in . 5 watt increments by pressing and holding the “+” or “-” button. Hold the button down to quickly increase or decrease the set wattage. If the wattage is decreased below 6 Watts it will cycle up to 100 Watts.
What is CoolFire IV?
Description. The Cool Fire IV Vape Mod with 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on! The compact power, bright OLED display, long lasting battery capacity and easy to use menu system.
Why is my vape flashing green?
A flashing green light could be indicative of a connection problem between coil (or tank) and battery. To resolve it, ensure the coil is fitted in snugly and that the base of the tank is screwed properly – nice and tight.
How do I know when my Innokin Adept is charged?
The battery sign on top of the power bars will light up every time you vape, and its color will indicate battery levels. The battery sign will also light up when the device is plugged in and will turn off when it is fully charged.
How do you unlock an innokin vape?
You need to long-press either of the up/down keys first to unlock the wattage, then press either the up or down button a second time to increase or decrease the wattage respectively.
What is the Innokin Coolfire IV Plus?
We take a look at the brand new Innokin Coolfire IV box mod. The Coolfire IV Plus is an upgraded version of the popular Innokin Coolfire IV mod. The new Coolfire IV Plus is marginally thicker and heavier than the original, but therefore boasts a larger battery capacity, higher max wattage and can fire down to a lower resistance. The Coolfire IV Plus has a nice 3300mAh battery vs the 2000mAh on the original. The Plus now has a max wattage of 70W, up from 40W on the original. Lastly you can now fire down to 0.1ohm on the Plus, whereas the original could only go down to 0.3ohm. In a market where higher power and lower resistances has become quite mainstream, the Coolfire IV Plus boasts some much needed improvements. The Coolfire IV Plus does not have temperature control, so if you are looking for that, you will need to look at Innokin’s new Cortex mod instead.
Is the Innokin Coolfire Plus chubby?
Whilst the new Coolfire Plus is slightly chubbier than the original, Innokin have managed to somehow make it look even sleeker. The one we have in Black, looks really nice and it sits really nicely in the hand whilst vaping.
Does Coolfire IV Plus have temperature control?
The Coolfire IV Plus does not feature temperature control, but I can still see it appealing to a lot of vapers who are looking for a mod in this wattage range. It is a great looking and well built box mod and I can see it being very popular with beginner to intermediate type vapers.
Appearance
When I look at the Cool Fire IV Plus, it seems so standard to me. I must say though, all products under the Innokin branding has this sense of quality to them, but they don’t quite shine like many of the other mods on the market.
Features
There isn’t too many features to brag about when it comes to the Cool Fire IV Plus, but it does have the ability to run up to 70 watts, and you can fire down to 0.1Ω, which I feel is plenty enough. With this device, you have the ability to switch from wattage mode to voltage mode, although I believe wattage mode is more preferred.
Performance
When it comes to the performance, this is where the Cool Fire really begins to shine. From the first few pulls from this device, I could instantly tell that this device offered a very nice and very consistent vape, much like you would notice from using a device with a DNA chipset.
How many watts does a cool fire IV vape last?
Whilst many find the Cool Fire IV comfortable to hold due to it’s shape, others find it a bit awkward to hold. Battery won’t last the whole day if you vape at 40 watts. It’s a bit fiddly to change the wattage / voltage – but once you’ve done it once, it remembers your last settings.
How to switch to wattage mode on a Cool Fire IV?
To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
How to tell if my Fire 4 is low on power?
The Cool Fire 4 has multiple battery indicators to let you know when the device is running low on power. The most obvious indicator is the battery icon on the OLED display, but you can also see the voltage remaining by holding down the plus and minus buttons simultaneously.
How long do you have to charge a cool fire?
Before using the Cool Fire you must charge the battery for at least 4 hours (ignoring the charge indicator for the initial charge). In the box you’ll find a Micro USB charger (DC 5V/1A) that you can use to charge your new device from a computer, or using a compatible plug adaptor.
How much is the Innokin Cool Fire 4?
The Innokin Cool Fire IV (available for £39.99) is the newest box mod on ECigaretteDirect, and the latest model in the popular Cool Fire series. In this post you’ll find an overview and tutorial with everything you need to know to use it.
Can you vape while charging a cool fire?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
Does the Cool Fire IV have a cutoff timer?
For your peace of mind, the Cool Fire IV is packed with safety features including low voltage protection, short circuit protection, overheat protection (will display ‘too hot’), over discharge protection and a 15 second cutoff timer, while the built-in heat dissipation holes further prevents the device from overheating.
Zenith II tank o rings placement
Are there any instructions as where the o rings should go on a Zenith II tank ?
innokinstore.com Customer Service?
Is it common practice for innokinstore.com to ignore customers? I ordered a Kroma-R Zlide on 3 February and there has been no communication from them at all. No email says "Thank you for your order" or "your order is being processed" nothing. Just something to let people know this is not a scam.
Help
So I just change the coil on my kroma z and the coil won’t vape anymore well it does work but little to no vapor comes out of the vape what did I do wrong I have a spare coil? Incase I need to change it again
How to increase wattage on a Cool Fire IV Plus?
When the Cool Fire IV Plus is in variable wattage mode press and hold the "+" or "-" button and the set wattage will flash. Hold the button down to quickly increase or decrease the set wattage.
How long does the red LED blink on a Fire IV Plus?
When the battery capacity is lower than 3.3V the Red LED will blink for eight seconds and the Cool Fire IV Plus will automatically power off.
Can I charge my Cool Fire IV Plus?
The Cool Fire IV Plus is recharged with a Micro USB cable. When plugged into a suitable power source the Cool Fire IV Plus can be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.
How many volts does an Innokin Coolfire 4 use?
The Innokin Coolfire 4 can fire atomizers from 3.0 Volts all the way to 7.5 Volts and a variable wattage from 6 to 40 Watts adjustable in increments. The Innokin Coolfire 4 uses a 2000 mAh battery. That’s plenty of power to last an entire day on just a single charge.
What is the Innokin Coolfire 4 Plus?
The Innokin Coolfire 4 Plus box mod is the brand new version of the very popular Coolfire series. Thisbox mod looks very sleek and has an excellent quality design. It is absolutely one of the best-looking box mods. It fits tightly into your hand. The very responsive firing switch at the bottom of the Coolfire 4 results in an amazing vaping experience.
What to do if your coolfire light turns orange?
If the light turns orange or red, you should probably charge the Coolfire as soon as possible. The Coolfire 4 includes all you need to start vaping immediately. All you really have to do is attach your favorite atomizer or tank.
Can you vape while charging Innokin Coolfire 4?
The Innokin Coolfire 4 has a wide range of variable wattage, voltage and state-of-the-art safety features. You can also vape while charging.
Rick Vapor Moved On
I have had a cool fire 4 for about 6-8 months. The thing does not charge anymore. I let it go completely dead battery and then charged it a day or two later, now the thing just flashes the yellow green red like simon and every few secs the many lights up. It will not hold a charge and I'm confused if I screwed it up or if it is a quick fix.
Rick Vapor Moved On
Have you made sure that the manual ON/OFF switch is switched to "ON" on the bottom of the device? That master switch takes precedence over everything else.
Subohm ash New Member
I have had a cool fire 4 for about 6-8 months. The thing does not charge anymore. I let it go completely dead battery and then charged it a day or two later, now the thing just flashes the yellow green red like simon and every few secs the many lights up. It will not hold a charge and I'm confused if I screwed it up or if it is a quick fix.
