How do I refill my Aspire breeze vape? Pop off the mouthpiece with a fingernail and use the underside of the mouthpiece as a tool to unscrew the chimney. Thread the coil head to the bottom of the chimney, then fill the tank with juice until it reaches the fill mark line. Insert the chimney/coil head ...
How to fill an Aspire vape pen?
The Aspire vape pen is a top-filling device that allows you to drop your e-liquids into the 2ml tank. The process of filling the pen is simple. All you need to do is unscrew the top cap and remove it from the device. Then, fill your tank with the top liquid and put back the cap onto the tank.
Is the Aspire pen any good?
On the other hand, the 1.2 ohm is a good mouth-to-lung pen, and it can double up your battery life. The coils used for the Aspire are a mix of stainless steel wires, and organic cotton combines with the high-tech U coil technology of Aspire devices.
How to use an e-liquid vape pen?
To inhale from the pen, press the firing button and release after you have taken a draw. It would be best if you were keen on the tank's window on the side to confirm that your e-liquid levels cover the exposed cotton of the atomizer. If the liquid goes below the cotton, then it could dry out and burn.
What is the Aspire pockex vape pen?
The Aspire pockeX is a very compact vape pen that incorporates the all-in-one features of the vape pen. The pen has a good design and only measures 11.77cm by 1.97 cm, which allows for easier portability. This means that the pen can easily be carried in the pocket or your backpack.
How do you refill an Aspire vape?
0:291:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do you put liquid in Aspire k2?
0:201:26How to use your Aspire K2 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simplyMoreSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simply insert the juice bottle done one of the sides. And squeeze.
When should I refill my Aspire PockeX?
The 0.6Ω PockeX coil should last at least a week before needing to be replaced, while the 1.2Ω PockeX coil, Nautilus and Nautilus X coils should last longer. You can extend the life of your coil by making sure to prime the coil before use and keeping the PockeX tank topped up to prevent the coil from drying out.
How do I refill my Aspire K1?
How do I fill the standard version K1 plus tank with e liquid ?Unscrew the drip tip to remove it from the tank;Place the tip of your filling bottle into the filling hole;Squeeze the filling bottle to add your preferred e-liquid into the tank;Put the drip tip back on top of the tank then screw to secure it.
How do you open aspire k2?
1:015:25NEW Aspire K2 Quick Start Kit Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking apart the tank is actually really easy because the threads are so clean all you do is pinchMoreTaking apart the tank is actually really easy because the threads are so clean all you do is pinch the top and the bottom and twist the top. It. Comes apart very easily.
How do I empty my Aspire vape?
Remove the Aspire Nautilus from your mod and securely place it on the dish towel. Safely store your mod away from the sink. Invert the Nautilus (drip tip pointed down) and allow any remaining e-liquid to drain towards the drip tip end of the tank.
Is Aspire PockeX mouth to lung?
Charge the device with a USB cable, fill the tank and you're ready to go. One aspect of the Aspire PockeX that makes it a perfect choice for new vapers is that it is designed for mouth-to-lung inhaling. When you use the device, in other words, you'll draw the vapour into your mouth before inhaling it.
What vape juice is best for Aspire PockeX?
The Aspire PockeX AIO functions at its best when used with juices containing at least 50% VG (vegetable glycerine). 50/50 e-liquids tend to be the best match, particularly if you are looking for a great balance between flavour, throat hit, and vapour.
How do you fill a vape with liquid?
How to refill a vape podRemove the pod from the vape battery.Find the rubber bung that covers the fill port.Lift up this rubber bung to show the filling hole.Place the nozzle of your e-liquid bottle into the hole.Tilt the vape pod at a slight angle to prevent air pockets.Slowly fill the pod with e-liquid.More items...
How do I open my vape tank?
Sometimes the vape tank requires little extra force to unscrew it from the mod. Use either a rubber band or mouse pad to enhance the grip. Only resort to hard (metallic) tools like pliers as a last-case scenario, since they can cause larger breakage to your mod.
How do you fill a aspire Nautilus tank?
1:102:58How To: Prime And Fill Aspire Nautilus AIO Pod Vape | VaporleafYouTubeStart of suggested clipEnd of suggested clipThen take your juice bottle. And hold it to one side of that fill port to make sure that air is ableMoreThen take your juice bottle. And hold it to one side of that fill port to make sure that air is able to escape as you're filling it and just squeeze the bottle and fill your reservoir.
How do you fill an Aspire Athos tank?
Aspire Athos Filling We designed the Athos tank with ease of use in mind, and it couldn't be easier than filling this tank from the top. Just unscrew the top cap, fill with your preferred e-liquid through the easily accessible 'fill slots', replace the cap and you're good to go.
How to fill Aspire breeze?
Aspire Breeze Filling. Fill the Breeze from the top, pull off the drip tip section, unscrew and remove the cartridge, you can add your preferred e-juice into the tank. Be aware of the max fill line when filling the breeze.
How much current does the Aspire Breeze have?
Aspire Breeze Charging. The Breeze can be charged from its Micro-USB charging port, maximum charge current can reach up to 800mA. It can also be charged by using the charging dock for more convenience.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
Aspire pockeX features
The pen is a very small, designed sleek vape mod that appears shorter than most smartphones. The pen is simple to use and very appealing to people looking for a high-performance device. With the small size and weight of 86 grams, the handling of the pen is very amazing.
Build and design quality of the Aspire pockeX
The kit comes with the Aspire pockeX pen unit and a 0.6ohm atomizer already fitted. You also get a 1.2ohm atomizer, micro USB charging, and a user manual. The battery of the pen is a built-in 1500mAH cell that features a bypass output. You will get a 30-day warranty for the battery from the time of purchase.
How to use the Aspire pockeX device
The device comes ready to use with a fully charged battery and a full pre-filled tank. To start the device, press the power button five times consecutively and do the same if you want to switch it off. The indicator on the pen will flash three times to show that it is ready for vaping.
How to refill an empty Aspire tank
The Aspire vape pen is a top-filling device that allows you to drop your e-liquids into the 2ml tank. The process of filling the pen is simple. All you need to do is unscrew the top cap and remove it from the device. Then, fill your tank with the top liquid and put back the cap onto the tank.
Conclusion
The Aspire vape pen is a very reliable AIO device that can be used on the go. The pen has a generally good and durable quality which is very affordable. The pen is simple, and the convenience will go a long way to give a better experience.
Build and design quality
The Aspire PockeX is a small vape mod that seems to be slightly shorter than an average smartphone. The device is simple to use and will win the hearts of people after a ruthless mod. With its small size, it comes at 86 grams, and it is very pleasant to handle and use. Its build is excellent and does not come off as stressful to use.
How to use the Aspire PockeX
The device is ready to use once the tank is filled and charged. To turn on the device, press the fire button five times consecutively and repeat this process if you want to turn it off. The indicator light flashes three times to show you that it is the moment to vape.
Aspire PockeX vs. Vision Spinner 2
For a starter, the Vision Spinner 2 is a good unit to start with. It has a sleek and stylish look which is similar to other mid-sized batteries. It has a convenient and easy-to-use voltage dial, an advanced PCB circuit, and a long battery. You can use this device with any tank of your choice.
Flavor and vapor quality
The Aspire PockeX coils create a good combination of stainless steel wires and organic cotton. The U-tech coils have a good way of diverting airflow to allow for the recycling of the drawn air twice through the coil for an unparalleled flavor and huge clouds of vapor. You have the option of choosing between two coils.
Battery and charging of the Aspire PockeX
The Aspire PockeX comes with a 1500mAh battery that has a bypass output. You are allowed a 30-day warranty on the battery from the day of purchase. The battery level indicator is found on the button and it can change its color concerning how much battery percentage you have left.
Performance of the Aspire PockeX
Filling this device for use is not an easy task. You only have to unscrew the top cap and pour in your 2ml of e-liquid into the tank. Use the max line to guide you on how much you need to vape to avoid chances of leakages and spitting issues.
FAQs about Aspire PockeX
The Aspire PockeX is a good all-in-one device that should not be overlooked. It delivers the best vapor and performance with so little maintenance needed, all you have to do is keep it working well and you will be good.
