Full Answer
Why is my aspire vape not producing vapour?
May 11, 2019 · How To Turn The Aspire AVP ON/OFF: Press the mode button five times quickly to turn the device ON. You’ll see an LED light flash white three times to indicate that the device is now on. You’ll see an LED light flash white three times to indicate that the device is now on.
Why isn’t my aspire bp80 vaping?
The SkyStar is a dual 18650 battery 210 watt mod with a 1.3-inch touch screen with every function you have come to expect from Aspire. Wattage/Voltage/BYPASS/TC (Ni,Ti,SS,M 1 ,M2,M3) and CPS (Customizable Power Settings). Its sensuous curves make it very ergonomic in the hand and easy to operate all the functions with just one hand, and an ...
What are the features of the vaper mod?
Aspire BP80 Not Vaping. If nothing happens when you try to vape with the Aspire BP80, it’s possible that you simply turned the device off and forgot that you did so. Press the fire button five times quickly to turn the device on. If the device doesn’t do anything when you try to turn it on, it’s possible that the battery is completely dead.
Which aspire Squonk box mod should I buy?
Jul 17, 2020 · This could be down to a couple of problems. Make sure you check that everything is connected tightly. Having something like the coil not properly attached can cause this. You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
How to turn on Aspire AVP?
How To Turn The Aspire AVP ON/OFF: Press the mode button five times quickly to turn the device ON. You’ll see an LED light flash white three times to indicate that the device is now on. Repeat the process to turn the device OFF.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
What is AVP AIO?
The Aspire AVP AIO Kit is a fascinating device that has been created by one of the industry’s most iconic brands. Just like past devices, it’s made with outstanding quality using zinc and aluminum alloy materials for its chassis, while a carbon fiber inlay is present on both the front and back of its panels for enhanced appeal. The Aspire AVP AIO only stands just 82mm by 39mm by 14mm, making it very compact and portable. It comes with an integrated 700mAh rechargeable battery, allowing it to deliver a wattage range of 8W to 12W. It utilizes a power adjustment button to change from 8W to 10W to 12W and even features a bypass mode for times when charging. Believe it or not but the AVP Kit has a draw-activated firing mechanism, so you’ll never have to fool with a button just to vape. The pod has a 2ML e-liquid capacity and features a bottom fill system and a Nichrome 1.2-ohm integrated coil.
How to secure a lanyard to a pod?
On the side of the device, there is an eyelet where you can insert a part of the lanyard through. Secure the lanyard to the edge of the device by making a loop and attaching the end of the loop over the hook/peg next to the eyelet. Next, pull the lanyard to tighten. Then insert the pod to continue use. Advertisement.
Does the AVP pod burn up?
I have the AVP for almost a year now and tends to work great. It does not burn up easily like the other smok pods that i have and the battery almost last all day. Only downside i have noticed over time is the metal casing that the pod sits in must get bent or stretched as i have to wiggle the pod around sometimes or push down to get a connection when taking a draw.
Is AVP easy to use?
While the AVP (Aspire Vape Pod) is very easy to use and operate, there are users that are unfamiliar with vaping devices or experience an issue while using it. Hopefully, by sharing this information, you will be able to properly use the Aspire AVP or fix an issue you may be having with the device.
What battery type can I use with Aspire?
Aspire now brings you the ultimate in mod adaptability and flexibility. Introducing the new Puxos mod. It allows for use with three different battery types, an 18650, a 20700 or a 21700. The Puxos can also be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC (Ni/Ti/SS316L) and TCR (M1/M2/M3).
What is the Aspire Speeder?
The all new, all powerful Aspire Speeder. Bringing a high powered option to the Aspire brand. The Speeder is a compact but heavy duty 200W, TC mod. Dual 18650 high rate batteries power this device that is packed with all the extras that Aspire users come to expect. Auto rotate 0.96 inch OLED screen, continuous fire adjustable,multiple TC/VV/VW/TCR and CPS (Customizable Power Setting)options to nail that vaping sweet spot. You can couple this powerhouse of a mod with your favorite tanks and the vast array of adjustable options on the detailed display will allow for any changes!
What is the Aspire NX100?
Perfection starts with precision design and development. The Aspire NX100 represents Aspire’s commitment to produce the very highest quality vaping products. The NX100 features refined lines and high-level design accents throughout the design. The five button system is ultra-intuitive with one-button navigation between Temperature Control and Wattage mode. To top off the superior design and ease of use is a premium finish which aesthetically is one of a kind. NX100 is set to change the accepted quality levels across the industry. NX100 – Next Gen Vaping.
What is the maximum wattage of the Aspire Cygnet?
Introducing the new Aspire Cygnet mod, powered by a single replaceable 18650 battery, and a maximum wattage output of 80W. It is a highly portable mod that supports Variable Voltage, Variable Wattage and Bypass modes. It’s simple in design and has a fire button, 2 adjustment buttons combined to make navigating the mod super easy.
What is the Aspire K Lite mod?
Introducing the Aspire K Lite mod! It is small, sleek, and fits comfortably in the hand . It features a micro-USB charging port, 5 power options changed with the press of a button, and the 900mAh battery will last any vaper all day! The mod is also compatible with most cartridge style tanks for increased versatility of use! Wether you like Nic-Salt, CBD, or DIY mixes, the K Lite Mod is an exceptional choice!
How many watts is the Skystar mod?
The SkyStar is a dual 18650 battery 210 watt mod with a 1.3-inch touch screen with every function you have come to expect from Aspire. Wattage/Voltage/BYPASS/TC (Ni,Ti,SS,M 1 ,M2,M3) and CPS (Customizable Power Settings).
What to do if Aspire BP80 won't charge?
If you’re unable to charge your Aspire BP80, the first thing that you should do is check the screen for an error message. Does the screen display the message “Check USB?” If so, the power source isn’t delivering the 5-volt charging current that the Aspire BP80 requires. If the power delivery is too far out of spec – over 5.8 volts or below 4.5 volts – the device will display an error message and will not attempt to charge the battery. Connect the BP80 to a different power source.
How to check atomizer coil on Aspire BP80?
If you see the message “Check Atomizer,” The Aspire BP80 doesn’t detect the connected atomizer coil. Remove the pod and check for pooled moisture under the pod. Remove the condensation with a paper towel. Make sure that the coil is fully seated within the pod and try again.
What is the difference between Aspire BP60 and BP80?
How do the Aspire BP60 vs. BP80 compare? In short, the Aspire BP60 is a device that looks and feels more like a traditional pod system than the BP80 does. You may, therefore, feel a bit more comfortable with it if you really enjoy pod systems as they are and don’t want your vaping experience to change a great deal. The Aspire BP80, on the other hand, feels more like a mod in some ways and is a good choice if you’re looking for a device that will provide a major upgrade over what you’re using now.
What does it mean when you see an atomizer short?
If you see the message “Atomizer Short,” the installed atomizer coil has an assembly problem that’s causing a short circuit. Discard and coil and install a new one.
How to fill a vaporizer pod?
To fill the pod, push the nozzle of a bottle of e-liquid into the filling hole and squeeze gently until the pod is almost full. To replace the atomizer coil, pull the old coil from the bottom of the pod and insert a new coil. To prevent leakage, you should replace the atomizer coil only when the pod is nearly empty.
What to do if your Aspire BP80 is too hot?
If you see the message “Too Hot,” the Aspire BP80 has overheated. Move the device to a cooler location and give it time to cool down before you try using it again .
How to charge Aspire BP80?
How to Charge the Aspire BP80. To charge the Aspire BP80, connect the device to your computer using the USB-C cable included in the box. While the Aspire BP80 charges, the screen shows an animated image of a battery. When the device is done charging, the screen turns off.
When will Aspire vapes be released?
July 17, 2020. September 8, 2020. Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
How to prevent e-liquid from flooding?
Take your device apart and remove any excess e-liquid from the centre post. If this is an ongoing issue, then you might want to consider taking smaller inhales or reducing your airflow as this can cause floods. Higher VG e-liquid can also help to prevent this as it is thicker than high PG vape juice.
What to do if your e-liquid is still gurgling?
Still gurgling? Take it apart and give it a good clean up. You also need to make sure you are using the correct PG/VG ratio e-liquid for your device. If you have a sub-ohm device you should be using high VG.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
What is the difference between Aspire and CF MOD?
All of the other Aspire batteries are batteries within themselves, whereas the CF MOD has a compartment that houses a separate 18650 battery. This is extremely convenient, as you can have spare batteries in your pocket or purse to use when the battery runs out of charge.
How to contact Vape?
We take customer service very seriously and will do our best to keep our customers happy. Send emails to management@vaporauthority.com or call 888-927-VAPE to report problems or concerns. We also invite our customers to send suggestions or requests for any product we may not currently carry.
What is the CF MOD battery made of?
Similar to Aspire’s other CF batteries, the CF MOD is made with carbon fiber. The use of this material not only makes the device absolutely gorgeous, but also extremely durable. Available in blue, black, gray, and red, the CF MOD’s carbon fiber shell is truly dazzling to look at. The remaining components of the battery are made of high-grade stainless steel, giving the device as a whole an extremely solid construction.
How long is Vapor Authority warranty?
Don’t worry – you’re covered! You can always purchase with peace of mind from Vapor Authority. We offer you a full 60-day in-house warranty on all manufacturer defects, and a 15-day period for returns and exchanges on unopened items as well. Full details on our Warranty page
What is SSL in vapor?
Rest assured that when purchasing from Vapor Authority, all of your information is transmitted using Secure Sockets Layer (SSL), which encrypts your data.
When does Vapor Authority ship?
To help further this effort, we offer same-day shipping on all orders placed by 12:00 PM (Pacific Standard Time). Full details on our Shipping page.
Does Vapor Authority carry knockoffs?
To ensure this, we solely buy directly from the manufacturer or a manufacturer authorized distributor. Vapor Authority does not carry any clones or knockoffs whatsoever—guaranteed!
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
What is bypass mode?
Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
Do mods support coils?
Here it’s better to have basic understanding of coils, and it’s always advised to check your device carefully, because some mods support particular coils for TC mode, while others state clearly that they support more than one type, which you’ll find in the settings as TC-Ni, TC- Ti or TC ( NI, Ti ).
