How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do I Prime my aspire atomizer coil?
Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping.
What temperature should you set your vape to?
Common vaping temperatures are in the range 390°F to 480°F (200°C to 250°C ), with the temperature usually adjusted quickly in increments of 10°F (5°C). Set your target temperature. Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick.
How do you adjust an Aspire vape?
0:291:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do you use the Aspire Nautilus vape?
1:102:58How To: Prime And Fill Aspire Nautilus AIO Pod Vape | VaporleafYouTubeStart of suggested clipEnd of suggested clipAnd hold it to one side of that fill port to make sure that air is able to escape as you're fillingMoreAnd hold it to one side of that fill port to make sure that air is able to escape as you're filling it and just squeeze the bottle and fill your reservoir.
How do you use the Aspire breeze vape?
0:4510:53The Aspire Breeze All-In-One | My FAVORITE Stealth Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhere you vape. Automatically. If it's on it will start vaping. Or you can press the button on hereMoreWhere you vape. Automatically. If it's on it will start vaping. Or you can press the button on here if you would like to activate that.
Why is my Aspire vape flashing orange?
A flashing orange light around the PockeX fire button indicates a low battery and will signal that the device needs to be recharged.
How do I set up my Aspire Nautilus prime?
1:109:36Nautilus Prime by Aspire - Nautilus Lovers Rejoice - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd down here you got this little adapter. Let's pull that out. And you screw your nautilus coilsMoreAnd down here you got this little adapter. Let's pull that out. And you screw your nautilus coils into that these do hold three and a half ml of liquid.
How do you unlock an Aspire vape?
2:395:48Aspire Zelos 50w Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress again five times to unlock pressing the fire button times will turn on stealth mode and turnMorePress again five times to unlock pressing the fire button times will turn on stealth mode and turn the display off the unit will still operate. Press again three times to turn the display.
How do I setup my Aspire Breeze 2?
4:4311:31Aspire Breeze vs Breeze 2 Pod Based Systems - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover over the top pull that off press the two buttons. Take. The pot off you see your contactsMoreCover over the top pull that off press the two buttons. Take. The pot off you see your contacts there and your little grippy finger things there to turn it on is going to be five clicks.
How do I know when my Aspire vape is fully charged?
When fully charged, the LED will flash blue and orange 20 times. Remember to never leave a charging battery unattended and do not charge batteries over night.
What does it mean when a disposable vape blinks?
What exactly is the light doing? Most disposables have an indicator light that tells you that the device is in use. This light could turn red to indicate that the battery is running low on power. Or, it could blink, which is typically another sign that the battery is dying out.
What does it mean when my vape pen blinks 3 times?
a short circuitCertain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Why is my vape flashing 10 times?
Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How to open Aspire tank?
Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
Aspire Tigon Kit (3.5ml)
An all new ‘stick’ style device from Aspire. Introducing the Tigon kit, an easy to use ‘child safe’ compact device from ASPIRE. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape.
Aspire Tigon Kit (3.5ml) Dimensions
The Aspire Tigon Kit comes in two sizes, A non TPD 24.5 mm version with a 3.5ml capacity tank and a 23mm 2ml capacity TPD version.
Aspire Tigon Tank Standard and TPD Versions
The easy maintenance Aspire Tigon tank is, of course, removable and as previously stated comes in a standard 3.5ml version and a 2ml TPD version, both have interchangeable 510 drip tips for either MTL or DTL style vaping.
Aspire Tigon Tank Drip Tips
The Tigon tank comes supplied with a choice of MTL, longer style, drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL hits.
Aspire Tigon Coils
Aspire has included more flexibility in the Tigon kit by including two types of push fit coils. A 0.4ohm DTL style coil designed to run from 23-28 watts and a 1.2ohm coil designed to run at 10-12 watts more suited to MTL style vaping. Both coils are made from high grade nichrome wire, with great wicking properties for a flavorful vape.
Aspire Tigon Filling
The filling couldn’t be simpler in a child-proof/leak proof tank of this type. First, pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak-proof seal of the fill port.
Aspire Tigon Coil Installation
On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is the advantage of TC mode?
In TC mode, if the wick runs dry the temperature will start to rise, and therefore the temperature protection will immediately cut power to compensate.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
How to vape Aspire AVP?
How To Vape The Aspire AVP: While the device is turned on, simply take a draw (inhale) from the mouthpiece and the AVP will automatically detect that you’re using it. It will immediately auto fire so that you never have to press a button to vape.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Is AVP easy to use?
While the AVP (Aspire Vape Pod) is very easy to use and operate, there are users that are unfamiliar with vaping devices or experience an issue while using it. Hopefully, by sharing this information, you will be able to properly use the Aspire AVP or fix an issue you may be having with the device.
