When the Aspire Breeze 2 is fully charged the light will flash blue and orange 20 times then automatically turn off. How To Install The Breeze 2 Coil: Begin by pulling and removing the drip tip section, then unscrew and pull out the chimney unit. Next, you’ll want to detach the coil from the airflow control ring and replace it with a new coil.
Full Answer
What are the Aspire Breeze replacement coils?
The Aspire Breeze Coils (5-Pack) is crafted for the Aspire BREEZE 2 and BREEZE Pocket AIO Kit, featuring the U-Tech atomizer coil structure. Aspire Breeze Replacement Coils JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser. WARNING: This product contains nicotine.
Should you buy the Aspire Breeze 2?
Every avid vaper will be familiar with the popularity of the Aspire Breeze. If you want something even better, with a greater battery life, more storage capacity, and the same good looks and design of the predecessor, then the Aspire Breeze 2 is the ideal pick.
Is the Aspire Breeze 2 the best vape pen for You?
Although there are some minor flaws, the Aspire Breeze 2 is easily one of the best vape pens out there today. Whether you’re a new vaper or an experienced one, this device is highly recommended. And you know with tax cuts, we all have more money to spend.
What coil does The Breeze 2 come with?
The Breeze 2 comes with the 0.6-ohm coil of the original Breeze and a new 1.0-ohm Utech coil head. They both wick from two small holes and one larger slot.
How long do aspire Breeze 2 coils last?
The lifespan an average for both sets of coils seemed pretty good lasting over a week, but obviously, this is going to be juice dependant. The performance from the Aspire Breeze 2 is phenomenal for a refillable pod system.
Which coil is best for Aspire Breeze 2?
The 1.2 ohm coils are a MUST for the Breeze 2.
How do you change the coil on an Aspire Breeze 2?
1:113:23How To Change A Coil | Aspire Breeze 2 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst. We pop the mouthpiece off like that and you've got your airflow. This airflow also doubles upMoreFirst. We pop the mouthpiece off like that and you've got your airflow. This airflow also doubles up as the object holding your coil firmly in place. So you just unscrew. That.
Is the Aspire Breeze 2 GOOD?
If you are a fan of the original, I'd bet that you'd really love this one. It isn't perfect, but the Aspire Breeze 2 is easily one of the best refillable pod vapes out there. For the first time in a while, I can say with no hesitation that this device is highly recommended.
How long aspire coils last?
A new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized.
Why does my Breeze 2 taste burnt?
High wattages Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there's still some juice there. Always stay inside the recommended wattage ranges.
Why is my breeze flashing?
When the charge is between 3.8 and 3.5 volts the light will be blue only. When the charge drops below 3.5 volts the light will then become orange to remind you that it is time to charge your Breeze 2. charged, it will stop charging to prevent overcharging of your battery. light will flash blue and orange three times.
What does it mean when a disposable vape blinks?
What exactly is the light doing? Most disposables have an indicator light that tells you that the device is in use. This light could turn red to indicate that the battery is running low on power. Or, it could blink, which is typically another sign that the battery is dying out.
How do I change the coil in my Aspire vape?
0:151:59Tutorial how to change a coil on an Aspire Pockex I Vape & JuiceYouTubeStart of suggested clipEnd of suggested clipSo open the cargo box I popped it inside there Lucia cable as well and there is your fresh aspireMoreSo open the cargo box I popped it inside there Lucia cable as well and there is your fresh aspire pop X coil. Down. And with the nipple.
Can you vape water in a vape?
Yes, obviously you can vape water since it's a liquid with a low evaporation point… and it won't produce any nasty chemicals.
Are breeze Vapes good?
Final Verdict on the Aspire Breeze I found that it was convenient to take around, and that the smoothness of the vape and its flavor profile was nice and enjoyable. I would definitely recommend the Aspire Breeze to anyone who is looking to get into vaping, or looking to get into sub-ohm vaping.
What wattage is the Aspire Breeze 2?
28WThe Aspire Breeze 2 works on a direct voltage output which means that the draw will get weaker as the battery dies. The Breeze 2 will fire at a maximum wattage of 28W on a full battery with the 0.6ohm coil.
What coils does the Breeze 2 use?
The Breeze 2 comes with the 0.6-ohm coil of the original Breeze and a new 1.0-ohm Utech coil head. They both wick from two small holes and one larger slot. The 0.6-ohm head has larger wicking holes than the higher resistance heads, which is ideal for higher viscosity juices. In general, both coils work really well. I really can’t complain. Both have been free from hot pops, spitback, and dry hits. Here are a few notes on the coils I received.
How many parts does the Breeze 2 have?
The Breeze is a simple device, but a beginner might get a little confused at first. And I think the instruction manual is lacking. The Breeze 2 has five main parts: a battery, coil heads, a pod, a mouthpiece, and an airflow controller. It has three buttons, a fire button located on the front, and two pod-release buttons on the side.
How to adjust airflow on a Vape?
Adjust the airflow you want by turning the knurled ring, then return the mouthpiece. Wait about five minutes for the coil to saturate, then quickly press the fire button five times to turn on the device. Vape. Using the pod release buttons is pure fun. They work well with the latches on the deck to secure the pods.
How many mm does a Breeze 2 pod have?
Refilling the pod is simple due to the Breeze 2 having a 5 mm fill opening. And the anchored plug totally seals the ports – there’s been absolutely no leaking. Maybe a faint layer of condensation once or twice, but typically the bottom of the pod and battery housing is dry.
How to get a flying sprite out of a mouthpiece?
Pop off the mouthpiece with a fingernail in the side airflow vents (be careful, it takes a bit of effort and it may go flying)
How big is the Breeze 2?
The Breeze 2 dimensions are 95 mm x 35 mm x 19 mm, just slightly taller and wider than the first version. But it’s barely noticeable. Interestingly, the Breeze 2 weighs less than the original — likely because the long metal chimney is gone, and the mouthpiece is a much thinner plastic than before.
How to fill a pod with orange rubber stopper?
Flip the pod upside down and pull out the thick side of the orange rubber stopper and fill till almost full, then push in the plug (make sure the orange plug is not hanging out of the sides or it can interfere with the pod going back in)
Aspire Breeze 2 Airflow System
Adjusting the airflow is simple, just pull off the mouthpiece and turn the knurled airflow adjustment ring to your liking.
Aspire Breeze 2 Pod
The ‘pod’ comes in two capacities, a 2ml TPD compliant version and a 3ml standard version. To remove the pod just squeeze the pod release buttons on each side of the device to release and remove the pod system. To re-insert, just place the pod back into the power unit, and push down firmly until it ‘clicks’ into place.
Aspire Breeze 2 Coil Installation
Coil installation is easy too, just pull and remove the drip tip, unscrew and pull out the chimney unit. Then detach the atomizer from the airflow control ring and replace it with a new one. Screw the chimney unit back to the pod system and replace the drip tip section.
Aspire Breeze 2 Atomizer
The Breeze 2 comes pre-installed with a 1.0-ohm U-tech coil (specifically designed for nicotine salt type e-liquids)
Aspire Breeze 2 Filling
Squeeze pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.
Aspire Breeze 2 Charging
Charge via the Micro USB port. Maximum charge current can reach up to 800mA. When the USB cable is attached the Breeze 2 indicator light will flash blue and orange three times.
What is the Aspire Breeze 2?
The Aspire Breeze 2 is an all-in-one vape pod. In the box, aside from the Breeze 2 device, there are extra O rings, a Silicon seal, a 1 ohm coil and a .6 ohm coil, micro USB cable, warranty card, and user manual. As already mentioned, the vape has a 3ml capacity and a 1000 Mah battery.
How many parts does the Breeze 2 have?
The Breeze 2 is a simple device, much like its predecessor. It has five main parts: a battery, coil heads, a pod, a mouthpiece, and an airflow controller. There are three buttons — a fire button in the front, and two pod-release buttons on the side. Let’s look at the different features of the vape pen:
What is a Hangsen IQ 3secs?
The Hangsen IQ 3secs is a handy pod vape that uses a 2ml tank and is perfect for use with nic salt. It features a 400mAh battery and a 0.96″ TFT display. The IQ 3Sec is a simple to use, all-in-one vape that fits comfortably in your pocket or purse. The 400mAh battery should last all day on a full charge.
What is a vape pen?
Vape pens are meant for portable use, but if you don’t want others around you to notice, you will need a device stealthy enough to use discreetly in public. This means the device has to be small and slim.
How long is a vape pen good for?
When you do your research about vape pens, find one that has at least a one-year warranty, although a lifetime warranty is the best.
How much does a vape pen cost?
The average vape pen is priced between $20 and $100, but you can always find cheaper or pricier options depending on your needs.
What are the features of a vape pen?
Aside from the sheer variety in the types of vape pens, there’s also a lot else to consider. Build quality, vapor production, and ease-of-use are definitely some of the most important features to consider, but there’s also so much more than the vapor.
What is the Aspire Breeze 2?
Looks-wise, the Aspire Breeze 2 is an attractive, compact device that nails the sleek, modern style. Built from aluminum alloy, it’s highly durable yet surprisingly lightweight. The slim profile makes it ideal for taking on the go, with the device slipping conveniently into your pocket or purse without any noticeable bulk.
What is Aspire vape?
Aspire is a brand known for bringing a slew of high-quality products to the vape market that manages to defy vaper expectations while delivering everything they want and need. For Aspire loyalists, the brand symbolizes innovation, top-notch performance, and stylish design, all factors that have likely contributed to its impressive success.
Should I Buy the Aspire Breeze 2?
Overall, this AIO device is definitely one to consider if you want a highly functional, user-friendly vape that puts the simplicity back into your vape sessions. By eliminating excess features and settings while still preserving the key design elements vapers want, Aspire has created an easily usable vape that provides a highly enjoyable experience.
What coils are used in the Aspire Breeze 2?
The Aspire Breeze 2 All-in-One Kit uses the Breeze U-Tech coil system. In the kit, you’ll get both the 0.6-ohm coil and the 1.0-ohm coil. Although these are both good quality coils, the 1.0-ohm coil works better for a true MTL vape experience. The life of these coils is about two weeks and the flavor is strong throughout. These are excellent flavor coils, especially with highly concentrated liquids.
How many buttons are there on the Aspire Breeze 2?
The body of the mod has a zinc alloy chassis, both durable and nice to look at, especially with the matte-like, satin finish. There are three buttons on the Aspire Breeze 2 All-in-One Kit: one firing button on the front face of the mod and two pod release buttons on the side.
Is Aspire Breeze 2 all in one?
The Aspire Breeze 2 All-in-One Kit’s design is pretty ordinary. There isn’t anything flashy. Any differences in this kit compared to other all-in-ones lie in the separate elements of the device. Although many all-in-ones, pod mod s, and ultra portable systems often keep it simple with just two elements, the Aspire Breeze 2 All-in-One Kit consists of the mod (where the battery is housed), the pod, the coils, the removable top cap and mouth piece, and the air flow control.