How to choose the right vape tank for your device?
Aug 03, 2020 · Remove batteries where possible. Some devices may not be designed to have batteries removed. In this case, double-check that the device’s power is off. Figure out if your mod is broken. If the mod is broken, that may explain how your tank became stuck. Damage to the mounting plate can cause the tank to spin as if it was being removed, without ...
How to remove an over-tight vape tank?
Apr 04, 2019 · Freeze the Sucker. Here's a trick we learned from some really clever desperate vapers: If the stuck tank is already separated from the battery, try throwing that sucker in the freezer for a few hours. Tanks seal over rubber gaskets, which swell in the heat and shrink down to very hard little rings in the cold.
How does a vape tank work?
Be sure to read the comments as well... other viewers are sharing their tips, too!Where I got my juice rack- http://bit.do/LgJuiceRackAmazon vape shop- http...
How to fix a jammed vape tank?
May 22, 2018 · The mod, or box also has a 510 connector with a positive pin and negative outer threaded connector. When you put them together the + matches + and - connects to -. If the threads are stripped, you can try using a heatsink, which screws in between the tank and mod. Sometimes this works.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What to do if your vape is stuck?
Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers. So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out ...
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
How big is a jam jar pad?
Or rather, made to get jam jars unstuck and will work perfectly for your purposes. This pad is usually brightly colored and about 3-5" by 3-5", thin, floppy, shiny-plastic looking, and has little ridges or bumps over the surface.
RCP1991 Senior Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
Eskie ECF Guru Verified Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
Btsmokincat Ultra Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
ddirtyvapes Ultra Member ECF Veteran
For what it's worth, while this is normal and can happen with any device/topper combination that isn't fully adjustable, it is also a known issue with Innokin mods. They have short 510 connectors.
RCP1991 Senior Member ECF Veteran
Thanks guys. I should have paid more attention in 3rd grade math -- yes it's much more like 1, maybe 2 MM -- I appreciate the info, since it doesn't seem like a big deal I'll just deal
JCinFLA Vaping Master Verified Member ECF Veteran
I have at the most about a 1/2mm space underneath every tank I put on my Innokin Coolfire IV mods. It's only visable if I'm holding the mod up at eye level and can see light from behind it showing through underneath the tank. Doesn't make a difference in the coil firing correctly at all, so I just don't worry about it myself.
Tonee N Vaping Master Verified Member ECF Veteran
Some tanks flare out at the 510, i.e. Sense Blazer 200, on some of my boxes it sits higher on others it sits flush.
cal1k New Member
my Atlantis v2 tank has become too tight to unscrew by hand and I'm considering using pliers to open it. will this damage my tank or is there any better ways to go around unscrewing it?
Dys Achiever
If you must use pliers wrap some fabric around the atty first! When I first started vaping I did the same thing and made the mistake of taking the pliers directly to the atty. Scratched the shit out of it...
chopper Achiever
Get a small pin that will fit in the airflow hole, and use that as leverage to turn. The smaller the air hole the better
Judith Postman
my Atlantis v2 tank has become too tight to unscrew by hand and I'm considering using pliers to open it. will this damage my tank or is there any better ways to go around unscrewing it?
