What is alien vape?
Alien Vape. Alien Vape is driven by an unearthly desire to inspire smokers across the galaxy with our passion for vaping. We believe vaping is the future for all man kind. It is our opinion that our prosperity as a human race is predicated on our efforts in designing and deploying products that promote a vape lifestyle.
How do I know if my vape wire is good?
You know there’s a coil inside your tank or atomizer that has a resistance, which—if you use any regulated mod—is shown on the screen generally with a “Ω” sign. When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change.
How to find the best wattage for your vape tank?
Three Rules For Finding The Best Wattage For Your Vape Tank 1 Start Low. Even If Your Tank Says It Can Handle 150W, Start At 60W And Work Your Way Up 2 Higher Wattage Does Not Mean Better Vaping. I’d Rather Vape At 60W And Conserve My Coil Heads 3 Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
What is the difference between ti and nickel vapers?
In addition, nickel can sometimes cause a negative reaction in vapers who are allergic to the metal. Ti is short for titanium. like nickel, it has a fast ramp-up time, but it doesn’t have nickel ’s issue of allergic reactions.
What does SS ni ti mean on vape?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it's less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti.
What setting should I have my vape on?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What is TC NI mode vape?
TC mode is like a car that allows you to put the pedal right down, but you can also gently tap it to move the vehicle ahead slowly. With some mods you can set a custom curve, allowing you to control the speed and rate at which a coil is ramped up. This is a huge leap forward for the vaping industry.
How do I know what temperature to vape?
You'll typically want to vape 10° F (or 1° C) hotter than the average boiling point of the desired terpenes and/or cannabinoids, but be aware that it can slightly vary with different devices or strains. If you're vaping in the lower temperature range, don't throw out your already vaped bud.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
What heat setting should I use on my vape pen?
between 315℉ to 900℉As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What wattage should my vape be on?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
What is the correct wattage for vaping?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
Is Ti a nickel?
Ti ( Titanium) Ti is short for titanium. like nickel, it has a fast ramp-up time, but it doesn’t have nickel’s issue of allergic reactions. Titanium coils, also, shouldn’t be dry burnt, as the wire will oxidize and ruin the coil.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do stainless steel tanks come with coils?
While stainless steel is still popular, the majority of tanks don’t come with TC-ready coils. If you want to vape in TC, and you are not interested in building your own coils, truth is that your choices are limited.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
Cannabis And Cannabinoids
Cannabis is made up of 113 different chemical compounds called cannabinoids. Cannabinoids can occur in different concentrations based on the specific strain and how it’s grown.
How Temperature Affects Cannabinoids
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad!
Temperature And Flavor
Though cannabinoids get all the press, marijuana also contains other vital chemical compounds called terpenes (or terpenoids) and flavonoids. These molecules are largely responsible for the flavor of your ganja. But they can also have some unique physical effects as well.
Vape Gear Operating Temperatures
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
Vaping Temperature Chart
The vaping temperature chart below will help you determine how high or low you should set your vape gear in order to get the cannabinoids and terpenes you need.
General Guidelines For Vaping
As a general rule, setting your vape gear to a temperature above 392 ℉ provides more of the cannabinoids that affect your body. Setting your vape gear to a temperature below 392 ℉ provides more of the cannabinoids that affect your mind and consciousness.
How To Adjust Temperature For Specific Effects
Every cannaseur is different. You’re no exception. If you’re looking for just the right temperature to get the best out of your bud, we suggest using the five basic categories below as a starting point.
Why do you want to vape nicotine salts?
Here are some reasons why you would want to vape nicotine salts if you have tried vaping before: Haven't been successful quitting smoking cigarettes. You want higher nico tine level strengths without the uncomfortable throat hit. You want less vapor production when you’re out in public. You want to use less vape juice.
Why is vaping so exciting?
The vaping industry is literally buzzing over this new product because of the instant rush you get from nicotine salts. This is incredibly exciting as it presents an opportunity for smokers and vapers alike to satisfy their nicotine cravings. Nicotine salts are not for everyone but if you feel like the existing products in ...
What does it mean to vape with a smooth throat hit?
Smoother throat hit. Better nicotine absorbability than traditional e-juices (according to Pax Labs) What this means is that you will be able to vape at higher nicotine strengths while getting a smoother throat hit. It also means that you will be efficiently getting more nicotine than what is currently on the market which explains ...
What is the difference between nicotine salts and freebase?
There are differences between freebase nicotine and nicotine salts but what makes nicotine salts different boils down to two key components: 1 Smoother throat hit 2 Better nicotine absorbability than traditional e-juices (according to Pax Labs)
How much nicotine do you need to vape?
With nicotine salts, high nicotine levels such as 35-50 mg, the throat hit become more comfortable and you don’t have to vape as much to get the same feeling.
How much nicotine is in a nicotine salt?
Nicotine salts use high nicotine strengths such as 50 mg nicotine levels compared to the usual 3 or 6 mg in regular e-juices. Low wattage devices are perfect for nicotine salt because you don’t need to consume as much vapor to get the same amount of nicotine in a high powered device.
Is nicotine salt better than regular vape juice?
According to PAX labs, nicotine salt works better at delivering nicotine in your bloodstream than regular vape juices and it would arguably provide a better vaping experience for those who are fresh off the cigarettes. What you will notice with nicotine salt is that you will instantly feel the nicotine rush which helps curb your cravings faster.