1) BATTERY TOO HIGH: The Battery voltage is higher than 4.5V. Replace another one. 2) BATTERY TOO LOW: The Battery voltage is lower than 3.3V. (The mod would automatically be shut down when it has warned for several times or either of the battery voltage is lower than 3.1V)
Why won’t my Smok vape turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it’s properly inserted.
Why choose Smok for your vaping mods?
Tackling minor device issues is one of the less enjoyable parts of vaping, but you can be confident that you’ll spend less time troubleshooting and more time chasing clouds when you choose a mod from SMOK.
Is X-Priv e-cigarette vaporizer reusable?
An e-cigarette vaporizer is reusable alternative to traditional smoking. Hi, my x-priv bricked and I didn't find a correct firmware on the official site... The support can't help me. Anyone know the solution? Thanks Answered! View the answer I have this problem too Is this a good question?
Does the smok X-Priv have a puff counter?
When it comes to the brand’s more advanced mods, like the SMOK X-PRIV and the SMOK Alien, problems may arise with the puff counter function. The puff counter is designed to allow users to track how much they vape, as well as place limits on the maximum number of puffs they take per day.
How do you reset a SMOK X-priv baby?
Hold all buttons WITHOUT batteries and plug into a USB port. Keep holding for ten seconds, throw batteries in while still connected, disonnect and reconnect to turn on.
Why is my SMOK vape charging but not working?
If that doesn't work try blowing into the charging port to remove any potential debris or fluff which is getting in the way of the contacts. If you're still experiencing issues you can try to clean inside the charging port with rubbing alcohol but make sure that it's fully dry before inserting the cable.
How do I get my SMOK vape to work?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you turn on the SMOK vape X-priv baby?
How Does the Smok X-Priv Baby Kit Perform?To turn on – press the fire button quickly 5 times.To turn off – either enter the menu system to the last page and select the off icon or press the fire button 5 times – this will show “Locked” then hold down the fire button until the mod switches off.More items...•
Why is my SMOK not working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
Why is my SMOK vape blinking 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
How do you unlock SMOK a priv?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
Why does my SMOK vape keep blinking?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output. 3. Low voltage protection: when battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down the output.
What to do if your X-Priv won't turn on?
If it seems dead and won't switch on, it can help to connect it to a PC with a USB cable and then try to switch it on. Worked for me when my x-priv would not start in any other way.
When will EPriv and XPriv firmware be released?
EPriv and XPriv firmwares are available on 9/1/18 from what I hear. Mag and Gpriv just dropped.
stols001 Moved On ECF Veteran
Um try to be more precise perhaps, define "ages." And really, you have to know the rate of speed you are charging at, etc.
rudions New Member
So it takes around 3-4h to get to full charge wont matter if charging trough PC or Charger.
bombastinator ECF Guru Verified Member ECF Veteran
So it takes around 3-4h to get to full charge wont matter if charging trough PC or Charger.
Baditude ECF Guru ECF Veteran
I agree with "bomb" above. Your current tank requires high wattages, which drain batteries much faster than a mouth-to-lung, low wattage tank would. Consider a tank like the Innokin Zlide, Innokin Zenith, or Aspire Nautilus. Fair warning: you won't get as much vapor with these tanks.
