“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
Why does my vape mod keep saying Check atomizer?
While we all know a check atomizer message may be annoying, usually there is no cause for concern. The no atomizer message appears when your vape mod is unable to read the resistance level of your coil. ·The tank is not screwed inadequately.
Is your vape mod not reading the coil properly?
It will inevitably happen at some point and it is usually an extremely easy fix. If you press the firing button on your e-cig and you see the message ‘no atomizer’ or ‘check atomizer’ it means that your vape mod is not reading the coil within your vape tank properly.
Why is my atomizer not reading my coil?
“Check Atomizer” or “No Atomizer” will appear when your mod isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
What does ‘No atomizer’ mean on an e-cig?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How do I fix my vape check atomizer?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do I reset my vape atomizer?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
What does it mean when it says atomizer?
Atomizer Short or Short Circuit When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil.
How do I know if my atomizer is broken?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.
Is an atomizer a coil?
The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I fix my vape coil?
How to Clean a Burnt CoilSTEP ONE: SOAK YOUR COILS. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.STEP TWO: CLEANSE YOUR COILS (optional) ... STEP THREE: LEAVE TO AIR DRY. ... STEP FOUR: PRIME THE COILS. ... STEP FIVE: REPLACE.
How do I change my vape coil?
How to Change a Vape Coil in a Pod SystemWhen the pod is empty, remove it from the device and hold it upside down.Twist the pod's base to loosen and remove it. ... Pull the old coil out of the pod.Push a new coil into the pod.Replace the pod's base and refill the pod.
How do you change the coil on a vape Smok?
1:295:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If youMoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If you accidentally remove the bottom plate of the atomizer.
How long do atomizer coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
How can you tell if a vape coil is bad?
Watch out for these warning signs that your coil is past its prime:It tastes burnt. You can't miss the taste of a burnt hit. ... The flavour isn't distinct. Last week, you vaped through a tank of mint-flavoured e-juice—this week, it's cake. ... You hear a strange noise. Old vape coils can sometimes allow e-juice to leak.
How long does a vape atomizer last?
Most wax atomizers will need to be replaced within 4 to 12 weeks. This number depends on how often you vape, and the temperature you choose. Those who vape constantly at high temperatures will need to replace their atomizer more frequently.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
1. Bad coil connection
If you are using a sub-ohm tank, then it is possible that your coil was inserted incorrectly, or it was just not tight enough. So simply re-insert it. Sometimes it’s just as simple as that!
2. You are creating a short
If you are using a rebuildable tank, make sure your build is not touching the cap or any other metal piece of the deck. Also make sure your coil is in good shape and there are no breaks.
3. You have a faulty tank or coil
Sometimes there is nothing wrong with your mod and the issue well might be in your tank. So try to screw a different atomizer in. If your mod is now able to fire the new atomizer, then you know who to blame! For sub-ohm tanks with pre-made coils, sometimes, you just get a bad coil. Try using a different one from the pack.
4. There is no connection
Clean the 510 thread of your mod and the 510 pin of your mod. Maybe there is just something stuck in between. If this does not work, maybe the lack of connection is related to your coil.