The cause of vape spitback is because e-juice is pooled up on the coil and is cooking, rather than being vaporised as it should be. This flooding can be caused by a number of factors such as over saturating your coil and using the wrong vaping technique for your device (ie trying to do direct to lung using mouth to lung kit).
Full Answer
Why is my aegis Max vape not working?
Aug 19, 2020 · Geekvape Aegis Max kits are shipped in locked position. This means that you need to unlock your vape by pushing the button 5 times quickly to unlock. Once it is unlocked, it will blink to confirm it is unlocked and will work. The other simple issue is that it is not charged.
What causes vape spitback and how to fix it?
Geekvape – Pursue a Healthy Vaping Experience. Official Partner of Paris Saint-German | AEGIS Series – the most durable mod in vape industry, from the smallest Aegis Pod to the handy Aegis Mini to the legendary Aegis Legend to the mightiest Aegis Boost to the most popular Aegis Hero, offers the best vape experience with long-lasting ser
Why does my vape gurgle when I vape?
It only does it when I have an atomizer on it. Could be that it's updating the Ohms or something and every time it "updates" the display, it ticks. My Aegis Legend drains batteries faster than my Squid Industries Double Barrel v3 does, so I'm wondering if this contributes to that.
Why is my vape not working?
Jun 06, 2018 · A fried chip or switch is one of the most common causes of auto firing. If you’re able to dismantle your device, look for any signs of damage on the switch and chip. You may not always be able to see the issue visually, so it may be a …
What is bypass mode on Aegis?
Bypass modes are a great way to remove wattage from the equation. In bypass mode, the vape bypasses the wattage. Instead, it relies on the highest voltage that it can get from the battery.Aug 11, 2021
What wattage should I vape at Aegis?
25-33 WattsThe Aegis Hero uses the same coils as the Boost Series, and you'll receive 2 different coils in the pack. This coil can handle a little more power, and is good for 25-33 Watts. It provides a nice smooth and flavoursome vape.
How do you adjust Aegis geek vape?
To switch between modes, press the fire button three times quickly to open the menu. Press the adjustment buttons to choose your desired vaping mode and hold the fire button to confirm.
How do I reset my aegis vape counter?
Five clicks of the fire button to turn the mod on/off. Hold down the UP and DOWN button together to lock the settings. Hold DOWN & Fire buttons to reset puff counter.Dec 2, 2019
Does higher wattage mean more flavor?
If you want a stronger or smoother flavour: Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.Feb 26, 2019
How many watts NIC salts?
Typically, nicotine salts perform best within the range of 15 watts to 40 watts. Lower than that range will produce weak hits and an unsatisfying amount of nicotine. Going beyond that can easily burn out your coils and make your e-liquid feel harsh. Keep this wattage range in mind when selecting your temperature.Mar 5, 2019
Why does my geek vape keep saying new coil?
When you put a new coil in a tank, the mod will recognise that it's a different coil to the previous one you had in it because of the resistance change. When it says new coil, select yes and it will work fine. If you select no it will still work but will still use the resistance of the previous coil you had in it.May 16, 2021
How long do aegis boost pods last?
The Aegis Boost has a 1500mAh battery and battery life is very good. Vaping at 20W with the 0.6ohm coil lasted me over two days of use and over two full refills. The 0.4ohm coil at 25W lasted around a day and a half.Feb 3, 2020
How do I change my aegis back to Watts?
One click of the fire button in settings mode moves cursor to select parameters. Up and down to change parameters. Long press the fire button to exit settings mode. Up and down to change wattage or temperature.Jul 24, 2020
Why is my aegis vape not working?
If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.
How do you reset Aegis hero puffs?
Press the adjustment buttons to select mode and hold the fire button down to select. Clear Puff Counter: press the fire button and down the adjustment button. The puff counter will be highlighted. Press the down button again to clear the puff counter.May 8, 2021
How do I reset my Geekvape Aegis legend puffs?
3 clicks of the fire button will allow you to scroll through Output modes. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Press and Hold Fire & + button – Brightness Up.May 21, 2021
Why is auto firing dangerous?
Auto firing can cause a battery to continue venting until it reaches an explosion point. This can lead to dangerous fires and potential injuries and is the biggest reason that auto firing should not be taken lightly.
Why does my phone auto fire?
A fried chip or switch is one of the most common causes of auto firing. If you’re able to dismantle your device, look for any signs of damage on the switch and chip. You may not always be able to see the issue visually, so it may be a good idea to have them replaced regardless.
What is auto firing?
The term “auto firing” refers to a vaporizer that is firing, but without the user pressing the main fire or power button. The device is often being stored in a pocket, purse or drawer when it happens, not even within reach of an accidental button push.
Is it bad if your vape is firing on its own?
If your vape is firing on its own it can be a nerve-wracking experience, and a dangerous issue if left unchecked. Even if you’ve never had to deal with this scenario, it’s important to know the signs, possible causes and how to handle it. Here’s a helpful guide to understanding auto firing, as well as some tips for troubleshooting your box mod ...
Can you stop auto firing?
There are a few minor changes that could stop the auto firing and protect you from a potentially dangerous situation. However, first and foremost, you should consider your safety. If you’re a beginning vaper, you might not want to venture into repairs at this point.
Can you remove batteries from a mod that has been auto fired?
Even if you believe that you have successfully made the necessary repairs, always remove and store the batteries when your mod is not in use.
Is it a risk to continue using a device that has demonstrated an auto firing issue?
At the end of the day, choosing to continue using a device that has demonstrated an auto firing issue is a risk. You can never be sure when the issue will return, and because it’s such a serious problem, it should be taken very seriously.
Acer50 Super Member ECF Veteran
I do not know how many of you have bought or tried the Geek Vape Aegis the indestructible mod. I did, and yes as far as being indestructible I have found it very much so. However, it it in need of urgent firmware upgrade as its V1 firmware proved to be unsafe. The Upgrade is available on Geek Vapes website.
spolen23 Full Member
The absence of the resistance lock is a major problem. I get the new/old atomizer question dozens of times per day without even taking my addy off. It is very annoying! If the resistance changes, and it will when fired, it asks me the same question and doesn't let me fire it unless i select new or old. Locking the resistance would prevent this.
Dropmyload Super Member Verified Member ECF Veteran
I am thinking of getting one. I can see on the website resistance lock has been added. Any update from users?
EODPaul Senior Member ECF Veteran
The update works. Resistance lock, the wattage stays locked even after power off and on, the 'New coil?' prompt is improved. I don't see any improvement in battery life, but it's no worse either. I have 2 of these now, and they've officially replaced my Yihi SX Q mini as my favourite mods .
stols001 Moved On ECF Veteran
I would do the upgrade. You want to set the resistance when your coil is cold. If you've been vaping it and then remove it too quickly, your resistance will be incorrect as most wires read their resistance differently when they are hot than when they are cold. So it would be a good idea, and make things more hassle free.
Knut arne Full Member
Just got one too. The screws for the update port, what kind of screws are they? Hex or torx ? Is it mm or inches size?
Knut arne Full Member
Finally got some torx, it seems like T 6,5 would be a perfect fit, t6 is a little loose and t 7 is too big. But these i have are low quality torxs and i dont have any 6,5.
Why do vapers take so long?
This is commonly due to the way in which the individual user to take drags from a cigarette, which tends to be rather vigorous.
Why does my power supply gurgle?
That is, the lower the resistance, the higher the wattage should be, and vice versa. Each resistance tank will have a range that is considered the “sweet spot.” If your power output is set too low to properly heat the coil , it will result in flooding and gurgling. Try increasing your wattage/voltage to a level that is within the recommended range—this may resolve the flooding and gurgling you are experiencing.
What happens if you prime a coil?
A properly primed coil will result in a much richer and tastier flavour, thicker vapour clouds, and a longer-lasting head. Taking the necessary steps to prime a new coil will also help you avoid dry or burnt hits. However, if too much e-liquid is added to a new coil, this can result in flooding and gurgling. The amount of e-liquid necessary ...
What happens if your power output is too low?
If your power output is set too low to properly heat the coil, it will result in flooding and gurgling.
How does a vacuum tank work?
In order for the vacuum effect to function appropriately, the tank needs to be well-sealed and air-tight. Check the assembly of the tank’s various components to ensure that everything is connected properly and securely. In addition, inspect the various parts for cracks or gaps that could potentially allow excess air to enter the tank. This can also contribute to flooding and gurgling.
Can you overfill a juice tank?
Some tanks are larger and can, therefore, hold a greater volume of juice, while others are smaller and can hold less. Regardless of the tank size, overfilling it can result in flooding, gurgling, and spit-back. As a general rule of thumb, you want to fill your tank to a level slightly below the air hole or chimney.
Can a new coil be a dud?
Likewise, sometimes a brand new coil can be a dud that lasts a fraction of the time you expect it to or can be faulty right from the start. Try replacing the coil to see if it helps eliminate the problem.
Why does my vape spit?
The cause of vape spitback is because e-juice is pooled up on the coil and is cooking, rather than being vaporised as it should be. This flooding can be caused by a number of factors such as over saturating your coil and using the wrong vaping technique for your device (ie trying to do direct to lung using mouth to lung kit).
Remove excess liquid
In your vape tank there will be a centre post. When excess e liquid runs down the centre it falls into the middle of the vape coil. To clean this up and take a piece of tissue and push it down the centre of the tank to clean out the excess ejuice.
Careful not to over-prime the coil
Priming your new coil is important to avoid dry hits. However, if you want to avoid vape spit, then you need to make sure you don’t over saturate the chamber. This can cause a flood of eliquid and spit back as a result.
Try a thicker e-liquid
If you are using a big cloud kit and a high PG eliquid then you will be more likely to flood the atomiser. This is because PG is much thinner than VG. VG is thicker and therefore slows down the wicking. Shop high VG eliquids >
Close the airflow a little
To prevent too much e juice reaching the coil you could reduce the airflow on your tank.
Adjust the power
When you vape with low wattage you may find that you are not vaping the e-liquid quickly enough for your wick. Up your watts by 5-10 if you have a variable wattage mod.
Fire her up
Before you take a drag on your vape, try pressing the fire button. You should hear those dreaded spitting and popping sounds fade into the distance. Once they have stopped, try giving it a vape.
The Ghost Hit
One of the first tricks any vaper learns is the famous Ghost Hit. You should take a inhale from your device and hold it in your mouth for a few beats. Then slowly push everything out, and when the whole cloud is out of your mouth, quickly suck it all back inside. When you do that, you will be able to see the “ghost” left by the vapor.
French Inhale
How to do smoke tricks with a vape? The second vaping trick worth knowing is the French Inhale, sometimes also called the Irish Waterfall. It is worth remembering that it can be done when you’re smoking traditional cigarettes as well.
The Dragon
The Dragon certainly sounds impressive, but it’s actually fairly easy to do. Start by taking a pretty big drag from your device but don’t inhale it all the way. Then create a block in the middle of your mouth, either with your lips or tongue and simultaneously exhale the smoke through your nose and corners of your mouth.
The Tornado
If you want to show off The Tornado to your friends, you need to find some flat surface to accompany you – it may be a table, countertop, or a big book. As usual, you have to start with a long drag from your vaping device. Hold the smoke in, put your face close to the chosen surface, and then slowly exhale the vapor onto it.