What temperature should you set your vape to?
Mar 13, 2019 · Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor. You can also easily adjust these values in 1°F or 5°F increments until you find your sweet spot. Don’t worry even you like it lower or higher than the average.
What is the best temperature control mod for vaping?
Oct 25, 2016 · Based on readings on various forums, users generally opt for a temperature value around 250°C for puffs shorter than 5 seconds. At a lower value, the coil does not heat homogeneously andThey evoke the “cooking” of their juice when gunk build up on the wick, which is generally associated to a degraded flavor.
What temperature should I vape my Mary Jane Weed?
Jun 21, 2016 · Locked resistance at room temp at .30 and managed like 5-10mins of vaping. Cloud productions are ok but not much of a warm vape, very mild IMO and got pretty hot at tip usually. Next session trying to fire up with big a prob where Temp protection keeps kicking in and its really frustrating. Thinking if i need to change to a better mod with good ...
How does temperature affect your vaping experience?
Feb 10, 2019 · First you should check http://www.steam-engine.org/ to calculate your desired ohm. In Temp control mode, your coils should stay 0.15-0.18 ohm. These are the best points as lower ones are not recommended. Then you should know that Temp control has its name, means control of coil is done based of temperature.
What temp do you vape SS at?
The best temperature for vaping e-liquid is in the 390 F range to 490 F range. We find that right around 420 F is the sweet spot for flavor and vapor.Oct 29, 2018
What is SS mode on vape?
Stainless steel (SS), nickel (NI), and TI (titanium) are all wire materials. With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.Jan 10, 2019
What temp and wattage should I vape at?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.Jun 3, 2021
Can you vape SS in wattage mode?
It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.Aug 18, 2021
What wattage should I vape at 0.4 ohm?
23 - 28 wattFor example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).Nov 27, 2020
What does 2% mean on a vape?
The amount of nicotine in a vape depends on what nicotine strength you choose. E-liquid strength ranges from zero nicotine, up to 20mg/ml, or 2%. This means there are 20 milligrams of nicotine present in each millilitre of e-liquid.Sep 16, 2021
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What wattage should I vape at 0.23 ohm?
20-45W0.23ohm | Recommended Wattage: 20-45W.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do stainless steel tanks come with coils?
While stainless steel is still popular, the majority of tanks don’t come with TC-ready coils. If you want to vape in TC, and you are not interested in building your own coils, truth is that your choices are limited.
What is the middle ground for vaping?
Titanium or Ti on the periodic table is considered to be the middle ground for vaping. It has a low resistivity, meaning you can build exciting coils that taste insane.
How does vaping change your experience?
Depending on the flavour , the entire experience of vaping is changed by changes in temperature. Some flavours of ejuice are drastically affected - in a bad way, while others may come to life with the addition of temperature. With vaping a lot of it is about trying new things -- provided that you’re not putting yourself in danger.
How does a vape work?
How does vape work? (brief and rudimentary guide) Inside your vape is a metal coil. Around the coil is cotton. The cotton is drenched in vape juice. A current (electricity) passed from the battery at the bottom through the coil when you press the main button.
What happens if you run out of juice in a vape?
Without TC, if your vape is running out of juice the power is left unchanged the cotton would start to heat up more or even burn. This is something that wattage based vapers may experience quite a lot as the power does not change and the temperature continues to rise!
What is TC in vaping?
Lots of new vape mods have Temperature Control (TC) that automatically adjusts the power output of the battery in order to maintain a steady temperature. Not only is TC far safer way of vaping but it is actually far more enjoyable, allowing you to take longer drags to pump out those big oh’s you’ve always wanted to do.
Does SS vape work?
SS works in high power modes, meaning that you could keep your vape at a much higher temperature. It does not get damaged by these high temperatures as it is an incredibly durable material.
Is it safe to use nickel in vapes?
However, Nickel is easier to control and that’s why people still use it - making for a safer vape. Also, if you have an automatic TC system, nickel can be used safely as it should stick to the middle/lower end of the ideal temperature range. Therefore, Ideally, if you have a nickel vape, you are best off sticking in the middle/lower end ...
What is temperature control?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed.
How does temperature control work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature.
What do I need to start using Temp Control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
How to vape in temperature control mode?
Most TC enables box mods have predefined profiles for Nickel (Ni), Titanium (Ti) and Stainless Steel (SS). Knowing the material your coil is built from will help you select the correct profile. Note that it is extremely important to use the appropriate setting for the best results.
Setting the right vaping temperature
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
What is low temp vaping?
If you’re a wake and baker, low temp vaping can give you the feeling you want, without burning you out for the day. This is also the ideal setting for newcomers and lightweights who don’t want to get too intoxicated. Light euphoria, calming, invigorating. Intense terpene flavor, fresh, citrusy, piney.
What temperature does THC have to be to be ok?
THC, the main psychoactive ingredient in cannabis has a boiling point of 315° F (157° C). You don’t want to go much lower than 325° F (163° C), especially if you want to really feel something. Low temps might appeal to you if you want the best flavor from your bud. It produces a fresh taste, with citrusy and/or piney undertones.
Why is THC stronger at higher temperatures?
The psychoactive effects will be noticeably stronger at these temperatures mostly because more THC is being volatilized. It can be relaxing, euphoric and put you in a meditative state without feeling drowsy. This temp range is an excellent middle ground for the best of both worlds between effects and flavor.
What temperature does THC have to be to be psychoactive?
The boiling point of THC is around 315° F (157° C), so anything lower will produce minimal psychoactive effects.
Why is vapor hotter at night?
This range is best suited for night time sessions because of its ability to induce lethargy, also called the dreaded “couch-lock”.
Is terpene vapor warmer?
In this range, you still get plenty of terpenes, but now with more access to cannabinoids. The vapor is thicker and warmer. You’ll also taste more of the cannabinoids, which can give it a richer flavor. The warm vapor is satisfying for transitioning smokers.
Can a weed vaporizer produce different vapor?
For example, two weed vaporizers set to the same temperature can sometimes produce a different type of vapor. Additionally, each strain contains different levels of terpenes and cannabinoids, which contribute to their smell, taste and effects.
What temperature does banana vaporize?
For the flavor of banana, isoamyl acetate is vaporized at 142°C (or 288°F). Benzaldehyde (cherry taste) boils at 178°C (or 352°F) and cinnamaldehyde (cinnamon taste) at 248°C (478°F).
What temperature does water boil at?
Water boils at 100°C, Propylene Glycol (PG) is vaporized at 188°C (or 371°F), Vegetal Glycerin (VG) at 290°C (or 554°F) and ethanol at 78°C (or 173°F). Other constituents are also present whose concentration and composition are also very variable from one juice to another.
Why is Kanthal not temperature controlled?
The reason why Kanthal does not allow temperature control is because this FeCrAl alloy has much more impurities than any others and does not offer superconductivity properties (a linear relationship of resistance with temperature).
What is the boiling point of nicotine?
Nicotine’s boiling point is reached at 247°C (or 477 °F). Flavorings can reach up to 20% in volume of the final blend.
What is the temperature of glutamic acid?
Glutamic acid is another popular exhauster (also called glutamate) that decomposes at 199°C (390°F). The reaction between an amine group of the glutamic amino-acid and a reducing sugar leads to the Maillard reaction that produces a wide variety of flavors when products are heat.
What is the relationship between resistance and temperature?
Relationship between resistance (R) and temperature (T) for a resistance coil. The resistance of an alloy is stable near room temperature and generally increases with temperature as the material becomes a superconductor. Then, and only after this transition, its resistance can be predicted from its temperature.
Does the resistance of a coil increase with temperature?
As a general rule, the resistance (R) of a coil increases with temperature (T ). In the temperature control mode, the chipset of the box measures on a very fast rate the resistance when incrementing intensity levels. The chipset basically increases the intensity of the current up to reaching a certain value (R) of the resistance.
kingdal Super Member Verified Member ECF Veteran
Hi ECF, I'm not new to rebuilding but I am new to the DNA200 and SS wire. I started playing with it yesterday, built a dual 12 wrap 316L, 2.5mm ID, .38 ohms in an RDA and running it at 450F and 35 watts. I'm having 2 problems with it. First, within a second or two of hitting the button, the Temperature Protection message comes on.
Petabread Super Member ECF Veteran
Hi ECF, I'm not new to rebuilding but I am new to the DNA200 and SS wire. I started playing with it yesterday, built a dual 12 wrap 316L, 2.5mm ID, .38 ohms in an RDA and running it at 450F and 35 watts. I'm having 2 problems with it. First, within a second or two of hitting the button, the Temperature Protection message comes on.
RandyF Ultra Member Verified Member ECF Veteran
I don't know how much experience you have with TC in general, but I would suggest starting with a single coil setup, dial that in, then move to dual coils. Temp control is finicky enough with one coil, trying to balance 2 coils using TC can be quite challenging. TC is much, much less forgiving than using kanthal in standard wattage mode.
Wingsfan0310 Ultra Member ECF Veteran
I have quite a few DNA200 mods and I'll be happy to share my experiences with you. SS316 is basically at the very low end of what our mods can accurately TC. I found it to be on the finicky side because of that reason.
rice721 1.21 GigaWatts! Verified Member ECF Veteran
Hi ECF, I'm not new to rebuilding but I am new to the DNA200 and SS wire. I started playing with it yesterday, built a dual 12 wrap 316L, 2.5mm ID, .38 ohms in an RDA and running it at 450F and 35 watts. I'm having 2 problems with it. First, within a second or two of hitting the button, the Temperature Protection message comes on.
KenD Vaping Master ECF Veteran
Did you lock the resistance of the coil at room temperature (before firing)? Usually this helps a ton.
rice721 1.21 GigaWatts! Verified Member ECF Veteran
Evolv actually recommends not locking the resistance unless there's a problem. I've found this to be the best practice with both DNA and joyetech mods. Also, the tcr of 316 and 316l is pretty much identical.
