Full Answer
What is the best coil size for vaping?
Mar 26, 2021 · While the usual range for standard vaping is between 1.5 ohms and 3 ohms, using a vaporizer containing an atomizer coil with a resistance of less than 1 ohm is technically referred to as sub-ohm vaping. While it might sound somewhat simple, it’s actually a fairly complex topic. So, let’s dig a little deeper. Is Sub-Ohm Vaping Safe?
What is the best vape juice for sub ohm vaping?
If you choose to vape with a coil resistance of less than 1.0 Ohm, this is known as a sub ohm or direct to lung coil, while vaping above 1.0 Ohm is referred to as a mouth to lung coil coil. Mouth to Lung (MTL) Vape Coils
What are rebuildable vape coils?
Feb 14, 2022 · Low Resistance Coils. Low Resistance coils (often referred to as Sub Ohm coils) have a resistance that is below 1.0 Ohm, which is why they are called ‘Sub’ Ohm. These coils are stereotypically associated with more experienced vapers and they are often found with more advanced vaping kits.
What is the difference between high resistance and low resistance vape coils?
Coils of 0.5 ohm - 1.0 ohm . Generally suited with anything from the thicker 50% PG right through to 70% VG, and in some cases even higher VG. Start with 50% PG and use that as a guide. Coils of 0.4 ohm and lower . You really need to be looking at the thicker and more expensive juices at this level to avoid leaks and performance issues.
Is 6mg good for sub-ohm?
Be aware that 6mg (0.6%) nicotine is probably an absolute maximum strength e-liquid to use in any sub-Ohm device. If you can't take the hit from the increased vapour from the VG content of the e-liquid, turning the power down will cause more problems than it solves, instead you need to reduce the nicotine strength.
What resistance coil should I use for vape?
2.4-2.8 ohmsVape coils generally have an ohm range of 2.4-2.8 ohms, with lots of people enjoying a resistance of 2.5ohms. Low ohm vape coils produce more vapour and flavour and case use more e-liquid and take more battery power than high ohms. High ohm e-cig coils produce less vapour and use less e-liquid and battery.Apr 3, 2017
Whats better 0.2 or 0.4 ohm?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
What is the best wattage for a 0.4 ohm coil?
The 0.4ohm coil option performs at its best when used in higher wattage modes between 23-28 watts.May 1, 2021
What wattage should I vape at 0.6 ohm Nord coil?
Coils in the SMOK Nord series: 0.6Ω Ohm - Mesh (DL direct lung sub-Ohm coil) 25W (best with higher VG liquid) 0.6Ω Ohm - Regular DC dual coil (sub-Ohm coil) 20W (best with higher VG liquid)
What wattage should I vape at 0.45 ohm?
Available in 0.45 Ohm these vape coils are suited to both high wattage and mid wattage vaping. Fused Clapton coils allow for increased cloud, thanks to its construction and can be used at higher wattages....0.45 Ohm Coil Art Premade Fused Clapton Vape Coils.Coil Resistance0.45ohmWireKanthal2 more rows
What's the difference between 0.6 and 0.8 coil?
If you want a bit more flavor and juice with a bit less nicotine but still want a MTL draw, you can use the 0.8 ohm mesh coil. If you're chasing clouds, the 0.6 ohm mesh coil offers some impressive cloud production for a pod vape and wicks fast enough to handle thicker vape juice.
What wattage should I vape at 0.8 ohm?
20 W - 35 WThese devices burn at higher temperatures and are intended for use with high VG liquids, producing thicker clouds and releasing more flavour from the e-liquid. A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts).Nov 27, 2020
What's the difference between 0.6 ohm and 1.2 ohm?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What is the best wattage for a 0.7 ohm coil?
20 – 25 wattsThe New Aspire Nautilus Mesh Coils are 0.7ohm and recommended wattage range is 20 – 25 watts. Pushing the boundaries of what is possible again the new Nautilus Mesh Coils raise the bar when it comes to MTL / Hybrid vaping again.
What wattage should I vape at 0.17 ohm?
40-80 wattsEach coil is an RGC Conical Mesh coil and has a resistance of 0.17ohms. The best recommended wattage of 40-80 watts. These coils are available as single coils or in packs of 5 x spare coils.
What wattage should I vape at 0.16 ohm?
A 0.16 ohm coil, for example, is probably not going to fire on less than 50 watts, and to get a decent use out of it you are probably going to need to go to 70 watts and above.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
Why is it important to use cotton coils?
When you're using cotton coils, it's very important to ensure the coil is thoroughly saturated in e-liquid to avoid dry hits (to avoid the cotton inside the coil getting burnt). The burning releases unhealthy chemicals, a bit like burnt toast, and although different chemicals are produced/released, neither are considered good and should be avoided.
What is the best coil for vaping?
Coils of 1.5 ohm - 2.5 ohm (Ω) If you're just getting to grips with vaping, start with an 70% or 80% PG eliquid because this thinner liquid blend is ideal for these coils. It will allow for more discreet vaping as it produces less vapour, and it's usually the cheapest. You can also use thicker 50% PG eliquid which will give you more vapour, ...
How much VG should I use for juice?
The amount of VG will usually need to be anything from 50% VG, and in some cases the user's preference is 100% VG.
Does PG have a sharper throat?
The higher PG liquids usually have a sharper throat hit. That ‘kick’ at the back of the throat is stronger in eliquids that have more PG than VG, although of course it depends on the nicotine strength you choose.
What are the ingredients in e-liquid?
The most common base ingredients in e-liquid are propylene glycol (PG) and vegetable glycerine (VG). You will find that some e-cig manufacturers may use one or the other exclusively, while many manufacturers will use a combination of the two.
Does VG vape have more flavor than PG?
eLiquid with a higher VG content tends to provide a smoother vape and diminished throat hit. VG doesn't carry the flavour quite as well as PG but but this can be countered by using more power to produce more vapour.
What is the difference between VG and VG?
Vegetable glycerine (VG) VG makes for a sweeter vape which creates more vapour and it has a thicker consistency. The advantage of using vegetable glycerine as the predominant base in e-liquid is because as it has a thicker composition it makes for a denser and more realistic-looking vapour.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Who came up with the formula for measuring electrical resistance?
Back in the 1800’s a German physicist ‘Georg Simon Ohm’ published his works regarding the physics of electricity. After lots of sciency things, he came up with a formula to calculate the measurement of electrical resistance.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
What is a coil in a vape?
If we’re going to be technical however, the coil is actually just the bit of resistance wire inside the atomiser. The standard wire used for vape coils is primarily made from Kanthal or Nichrome (which we’ll get into later). This wire is coiled (wrapped in a ‘coil’ shape) around a wicking material (which is usually made from cotton).
How long should I soak a coil before using it?
To prime a coil you just have to let it soak in the E Liquid for between 5 to 10 minutes before using it. This isn’t really priming though, this is more of a soaking. You’re supposed to drop E Liquid directly onto the cotton so it soaks in completely before putting it in the tank.
Is titanium coil flammable?
Titanium is rarely found in pre-made coils as it’s quite obviously an expensive option. For DIY coil enthusiasts though, the extremely soft and malleable nature of this alloy means more intricate coil designs can be created which (on the DIY market at least) are worth a lot more money. For all it’s benefits however, Titanium is a precarious choice for a coil. It’s much more flammable than all the other materials listed and is even used in the production of fireworks.
What is Kanthal coil?
Kanthal is the most commonly used material in coils due to it’s exceptionally fast heating time and high maximum heat absorption. Kanthal is made from Aluminium, Chromium and Iron which makes it extremely malleable too. This makes creating the coils much easier, which is another reason it’s preferred by manufacturers, and why it’s so popular with vapers who make their own coils. Kanthal coils should only be used in wattage mode, not temperature control.
Can you use a nickel coil with a variable voltage?
Nickel Coils are rarely found in pre-made coils nowadays however since they can’t be used with variable voltage/variable wattage devices (and some people have reported allergic reactions to Nickel). If you do choose a Nickel Coil, make sure it’s Ni200.
What is the resistance of a coil?
The resistance of a coil is pretty much what it sounds like, it refers to how much the coil resists the electrical charge sent from the battery. Coils with a higher resistance require less power to heat up than coil’s with a lower resistance. Electrical resistance is measured in a value called Ohms (Ω).
Can you unscrew the top of a tank?
Depending on the Tank you use, you might be able to unscrew the top and have a peek inside the coil. If you have a bottom filled tank, this won’t work out for you mainly due to pesky gravity. If you can take the top off without leaking E Liquid everywhere, check the colour of the cotton.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
How to prime a new coil?
To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal.
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
Do sub ohm coils produce more vapour?
While preferred nicotine strength is often a personal choice, it’s important to remember that sub ohm coils will heat more e-liquid to produce more vapour. What this means is that you’ll also experience a greater nicotine hit.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What does ohm mean in atomizers?
An ohm (Ω) is a unit of resistance. Essentially, the lower the resistance of your coil, the more electricity will flow through it. Increase the amount of resistance and less electricity will flow through. So when you use a lower resistance atomiser, and more electricity flows through, you will find the following:
What is the resistance of a sub ohm coil?
The term sub-ohm, while still used, is not as relevant as it used to be. Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping.
What is the difference between variable voltage and variable wattage?
The difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With a variable voltage device, you manually control the amount of power (voltage) going through your device.
How does variable wattage work?
The variable wattage device will then automatically adjust the power going through the atomiser (the voltage) to produce the power output you need (the wattage).
What does wattage mean in vaping?
To put it another way, watts is essentially how much power your vape produces and voltage is how much power is put through the device. So, as you increase the wattage the voltage also increases and vice versa.
What is a vape device?
Vape devices use simple circuits that contain a battery, a switch and a heating coil. The circuit is effectively a controlled short, with the power output from the battery used to create heat.
What are the benefits of temperature control?
Benefits of Temperature Control Vaping 1 Better Flavor Control: Certain E Juices perform better at different temperatures. For instance: having a lower temperature might bring out the sweetness more. Or, going higher could bring out richer tones. 2 Fewer Dry Hits: Because the maximum temperature is locked, you won’t get anywhere near as many dry hits – the atomizer just can’t get enough power to do it. 3 Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. 4 You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power). Less power means less E Juice burned.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
