Full Answer
What makes the Aspire coils so special?
The new aspire coils use the U-tech technology, vapor flows through the u-shaped chamber and passes the kanthal coils twice before being inhaled.all – new airflow performance allows for an amazing vape flavor and e juice taste.
How do I change the coil on my aspire AVP pro?
Aspire AVP Pro Coils Replacement coils for the Aspire AVP Pro are all Press-Fit and now use Kanthal AF wire for increased coil longevity. To change the coil, remove the pod from the battery and pull the coil out. The coil removal tool can be used if you have trouble.
What are aspire Nautilus X vape coils?
Aspire Nautilus X Coils. Nautilus X coils, 5pcs. per pack, resistance 1.5ohm, recommend work at 14 to 22 watts. The new aspire coils use the U-tech technology, vapor flows through the u-shaped chamber and passes the kanthal coils twice before being inhaled.all – new airflow performance allows for an amazing vape flavor and e juice taste.
What is the best coil for a vape kit?
This is a kit that takes either 0.6ohm or 1.2ohm MTL coil specifically designed for this kit only. The 0.6 is said to be ideal for sub vaping, for people who are after more clouds and a lower nic dose. The 1.2 is perfect for vapers who are after an ML vape with a high nicotine content.
What coil setting should my vape be on?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage. They also tend to produce less vapour and at a cooler temperature. With this in mind, it's upon you to find out what works best for your palate.
What is SS mode on vape?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it's less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti.
What coil resistance should I use?
2.4-2.8ohmIt's a good idea to start vaping with an atomizer and coil in the 2.4-2.8ohm range and take it from there.
What is TC mode vape?
Dry hits and burnt coils are one of the worst nightmares for a vaper, whether you are new or experienced. However, thanks to the revolutionary Temperature Control mode, you can now avoid dry hits, burnt wicks, and some other drawbacks that are common in non-TC vaping; netting you a smoother experience overall.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
What does TC NI mean?
First Time Temperature Control Setup: Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
Is lower resistance better for vaping?
A lower resistance will provide warmer vapour, a slightly drier hit, and bigger clouds. The downside is that you're going to use your e-liquid more quickly and typically you need to vape at a higher wattage meaning your 18650 li-ion battery will drain faster.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What is best wattage for vaping?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What battery type can I use with Aspire?
Aspire now brings you the ultimate in mod adaptability and flexibility. Introducing the new Puxos mod. It allows for use with three different battery types, an 18650, a 20700 or a 21700. The Puxos can also be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC (Ni/Ti/SS316L) and TCR (M1/M2/M3).
What is the maximum wattage of the Aspire Cygnet?
Introducing the new Aspire Cygnet mod, powered by a single replaceable 18650 battery, and a maximum wattage output of 80W. It is a highly portable mod that supports Variable Voltage, Variable Wattage and Bypass modes. It’s simple in design and has a fire button, 2 adjustment buttons combined to make navigating the mod super easy.
What is the Aspire Speeder?
The all new, all powerful Aspire Speeder. Bringing a high powered option to the Aspire brand. The Speeder is a compact but heavy duty 200W, TC mod. Dual 18650 high rate batteries power this device that is packed with all the extras that Aspire users come to expect. Auto rotate 0.96 inch OLED screen, continuous fire adjustable,multiple TC/VV/VW/TCR and CPS (Customizable Power Setting)options to nail that vaping sweet spot. You can couple this powerhouse of a mod with your favorite tanks and the vast array of adjustable options on the detailed display will allow for any changes!
What is the Aspire K Lite mod?
Introducing the Aspire K Lite mod! It is small, sleek, and fits comfortably in the hand . It features a micro-USB charging port, 5 power options changed with the press of a button, and the 900mAh battery will last any vaper all day! The mod is also compatible with most cartridge style tanks for increased versatility of use! Wether you like Nic-Salt, CBD, or DIY mixes, the K Lite Mod is an exceptional choice!
What is the Aspire NX100?
Perfection starts with precision design and development. The Aspire NX100 represents Aspire’s commitment to produce the very highest quality vaping products. The NX100 features refined lines and high-level design accents throughout the design. The five button system is ultra-intuitive with one-button navigation between Temperature Control and Wattage mode. To top off the superior design and ease of use is a premium finish which aesthetically is one of a kind. NX100 is set to change the accepted quality levels across the industry. NX100 – Next Gen Vaping.
What is the ohm range of a vape coil?
This is one created for the tank by the same name. The coil has options for both vaping styles, with a ohm range between 0.5-1.2ohms.
What mesh coils does the NXT Aspire use?
For the NXT Aspire created an exclusive 'push fit' mesh coil with fantastic wicking capabilities. You can get these in 0.8ohm mesh and they are specific to this device.
What is a Nautilus X coil?
Nautilus X coils are designed only for the X and XS vape tank of the same name. They provide a tighter draw and harsher throat hit.
What coil does Zelos 2 use?
Zelos 2 takes a BVC (bottom vertical coil) in 0.4ohm for restricted direct lung vaping, or 1.8ohm for your more traditional cig-a-like draw. The coils are interchangeable with other Nautilus coils. This gives you more options to personalise your vaping experience.
What wire do you use for an EXO tank?
These are designed for your EXO and tank of the same name. They use a Clapton Kanthal wire to provide a fast and even heat up.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to change coils on Aspire Revvo?
You’ll see the cone-shaped retaining nut that holds the coil in place. Twist off the retaining nut and lift the old coil straight up to remove it from the tank. drop in a new coil, ensuring that the o-ring on the side of the coil lines up with the tank’s glass. Replace the retaining nut and top hardware. Invert your mod – or place it on its side – for a few minutes to wet the cotton on the underside of the new coil.
How Do I Clean My Aspire Tank?
It also removes residue from the mouthpiece and clears out the air vents. You can clean your Aspire tank by disassembling it and swishing it in warm water. If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
How to fill an Aspire vape tank?
Some Aspire tanks fill from the top, and others fill from the bottom. Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping. Fill and reassemble tank. If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
The Aspire Guroo Tank : Changing Coil Changing
Aspire vape products have never ceased to impress. From trending pod devices to gorgeous kits, if you own an Aspire vape, you know you're getting the best there is. Yet, just when we thought we'd seen it all, Aspire drops a bomb on us: the Aspire Guroo tank.
Aspire Guroo Color Options
The Guroo comes in three colors: gunmetal, stainless steel, and black. Subtle colors like these are great because they're almost guaranteed to compliment your mod perfectly!
Aspire Guroo Breakdown
The Guroo's components are quite simple. The top cap can be removed for juice filling and can fit an 810 drip tip mouthpiece. The base is built with a 510 connector, compatible with an enormous variety of vape mods. An airflow control ring allows the user to adjust their air intake and also serves a secret purpose - but we'll get to that later...
Guroo Tank Specifications
The Guroo tank measures 27mm in diameter and 57mm tall. It's built from stainless steel and Pyrex glass, making it durable enough to withstand reasonable drops and falls without denting or shattering. The glass chamber can hold 4ml of e-liquid, or 5ml with the extended glass piece, which is included in the kit.
How to Fill the Guroo Tank
Add e-liquid to the Guroo tank via top-filling. Just rotate the top mouthpiece until it can be removed and inject up to 5ml of your favorite vape juice.
Guroo Replacement Coil Introduction
The Guroo Coils are designed for intense flavor and large clouds by completely vaporizing e-liquid. Guroo replacement coils are available in two resistances: 0.3ohm (recommended for 40-50W), and 0.15ohm (recommended for 60-70W). Replacement coils are sold in packs of three.
Aspire Guroo Atomizer Package Contents
The complete Aspire Guroo tank kit comes with the Guroo tank in your choice of color, a pre-installed 0.15ohm Guroo coil, and additional 0.3ohm Guroo coil, a 5ml spare glass tube, a set of extra O-rings, and a user manual. Be sure to grab your favorite vape juice so you can begin using your new tank as soon as it arrives!
When should I change a coil?
All vape kits are different, and so each needs a different approach. In short, there is no one size fits all approach to knowing when to change a coil, but it will be driven by a few factors:
What tank does Vaporesso use?
The Vaporesso Gen kit uses the NRG tank, with the SKRR coils. Our video linked above explains how to change the NRG tank coils and when you should as well.
Can Nord coils be changed?
While they can vary between generations, changing Nord coils is pretty straightforward. In this video link above we show you how to.
Does Kroma use the same coil as Zenith?
Kroma kits use the same set-up as the Zenith for the most part. In this video we explain how to change a Kroma coil for both.